LifeScan OneTouch Verio Reflect User Guide

June 7, 2024
LifeScan

LifeScan logoLifeScan logo 2 Blood Glucose Monitoring System
Quick Start Guide

LifeScan OneTouch Verio Reflect - qr

Use this guide to get to know your meter, and follow steps inside to get started.
IMPORTANT: Please read the Owner’s Booklet that came with your system.
IMPORTANT SAFETY INSTRUCTIONS:
After use and exposure to blood, all parts of this kit are considered biohazardous. A used kit may potentially transmit infectious diseases even after you have performed cleaning and disinfection. Refer to the Owner’s Booklet for important information about cleaning and disinfecting your meter, lancing device and cap.
For more information see: FDA Public Health Notification: “Use of Fingerstick Devices on More than One Person Poses Risk for
Transmitting Bloodborne Pathogens: Initial Communication 2010” http://wayback .archive-it.org/7993/20170111013014/
http://www.fda.gov/MedicalDevices/Safety/AlertsandNotices/ucm224025.htm. CDC website on “Infection Prevention during
Blood Glucose Monitoring and Insulin Administration” http://www.cdc.gov/injectionsafety/blood-glucose- monitoring.html.
Intended use
The OneTouch Verio Reflect™ Blood Glucose Monitoring System is composed of the OneTouch Verio Reflect™ Meter and OneTouch Verio® Test Strips. The OneTouch Verio Reflect™  Blood Glucose Monitoring System is intended to be used for the quantitative measurement of glucose (sugar) in fresh capillary whole blood samples drawn from the fingertips. The OneTouch Verio Reflect™ Blood Glucose Monitoring System is intended for self-testing outside the body (in vitro diagnostic use), by individuals with diabetes at home as an aid to monitor the effectiveness of diabetes control. The system is intended to be used by a single person and should not be shared. The system should not be used for the diagnosis of or screening for diabetes or for neonatal use.

Limitations
The OneTouch Verio Reflect™ Blood Glucose Monitoring System is intended to be used by a single patient and should not be shared. Do Not use on multiple patients. The system should not be used as a substitute for healthcare professional advice. It also should not be used for the diagnosis or screening of diabetes or for neonatal use. The OneTouch Verio Reflect™ System is not for use on critically ill patients, patients in shock, severely dehydrated patients or hyperosmolar patients (with or without ketosis). Do Not use the OneTouch Verio Reflect™ System for alternate site testing (AST). The system is not intended for use in critical care environments.
PLEASE REFER TO YOUR OWNER’S BOOKLET FOR ADDITIONAL LIMITATIONS OF USE

Meter icons

| Bluetooth® feature on
---|---
| Syncing
| Control solution result
| Low battery
| Screen navigation progress dots

Refer to the Owner’s Booklet for meter symbols and icons and their meanings.

Set up meter

Turn on meter
Press and hold until the Welcome screen appears.
Use or buttons to edit each setting and press to confirm.

Set language
Highlight the language you want and press .

LifeScan OneTouch Verio Reflect -

**Optional: Complete setup using the OneTouch Reveal ® Mobile App***
Select Yes to have the App walk you through setup.

LifeScan OneTouch Verio Reflect - Complete setup

Download the OneTouch Reveal® Mobile App before pairing your meter and mobile device.

LifeScan OneTouch Verio Reflect - google play

Set time Press if the time is correct or edit and confirm.

LifeScan OneTouch Verio Reflect - set time

Set date
Press if the date is correct or edit and confirm.

LifeScan OneTouch Verio Reflect - set date

Set mealtime range limits
Press if the pre-set Before Meal and After Meal range limits are correct or edit and confirm.

LifeScan OneTouch Verio Reflect - befor male

Set Test Tracker
Press if the pre-set goal is correct or edit and confirm.

LifeScan OneTouch Verio Reflect - test tracke

Set 90 Day Average Target
Press if the 90 Day Average Target is correct or edit and confirm.
NOTE: Talk to your healthcare professional about the right range limits, Daily Test Goal, and 90 Day Average Target for you.

LifeScan OneTouch Verio Reflect - treand

Take a test

Wash your hands with soap and warm water, rinse and dry before sampling. Remove the lancing device cap then insert a sterile lancet. Twist the protective cover.
Place the cap back onto the device.

Insert a test strip (gold side and 2 silver prongs facing you) to turn the meter on.

LifeScan OneTouch Verio Reflect - Insert a test

Adjust the depth setting on the lancing device. Cock the lancing device and hold firmly against the side of your finger. Press the release button. Gently squeeze finger to get a round drop of blood.

LifeScan OneTouch Verio Reflect - setting on the

Apply blood sample to the channel on either side of the test strip.
Once the channel fills, it will turn red and your result will appear in about 5 seconds.

LifeScan OneTouch Verio Reflect - channel

View your reading

ColorSure® Dynamic Range Indicator
The ColorSure® Dynamic Range Indicator instantly lets you know if your reading is below (blue), within (green) or above (red) your range limits. It also shows when your reading is near the low or high end of your target range.
A text note or emoji points to a segment on the Color Bar.

Examples of Readings

LifeScan OneTouch Verio Reflect - Examples of Readings

Meal and event tagging
A Before Meal ( ) tag will automatically be applied to your result. You may change your meal tag to After Meal ( ) and add an Event tag.

Blood Sugar Mentor™ Messages
Blood Sugar Mentor™ Messages provide insight on how you’re doing and diabetes management guidance, including educational and motivational messages based on your current and previous glucose results and other tracked data.

Examples of Blood Sugar Mentor™ Messages

LifeScan OneTouch Verio Reflect - Blood Sugar Mentor

Connect to a mobile device

Bluetooth® technology lets you wirelessly send your readings to a mobile device where you can use the OneTouch Reveal® Mobile App to review and graph your results, set Daily Test Goals, see Blood Sugar Mentor™ Messages, and help identify patterns.

On the Settings Menu, highlight Bluetooth and press .

LifeScan OneTouch Verio Reflect - highlight

A √ note if Bluetooth® is currently set to On or Off.
Press or change Bluetooth® status to On and press .

LifeScan OneTouch Verio Reflect - notes if Bluetooth

When prompted by your mobile device, enter the PIN shown.

LifeScan OneTouch Verio Reflect - Example PIN

Manufactured by:
LifeScan Europe GmbH
Gubelstrasse 34
6300 Zug
Switzerland
Consult instructions for use.

LifeScan logo

As your partner in diabetes care, we welcome you to contact us (7 days a week, 8:00 AM – 8:00 PM Eastern
Time) at 1 888 567-3003, or www.OneTouch.com.
Meter Made in China
© 2018–2020 LifeScan IP Holdings, LLC
AW 07201201A
OneTouch ®Rev. Date: 01/2020

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

LifeScan User Manuals

Related Manuals