HOOVER HGO 300 Hydro Robot Vacuum Instruction Manual
- June 7, 2024
- Hoover
Table of Contents
H-GO 300 HYDRO
PRINTED IN
P.R.C.
Part No：48031524
A quick guide to the first use of your Robot
|
Remove the Robot, charging station, main power adaptor, and remote control
from the packaging.
---|---
|
Place the charging station against a wall. Check for obstacles in the range
indicated.
|
Put the batteries into the remote control.
|
Switch on the Robot with the on/off switch on the bottom.
|
Plugin the main power adaptor and connect it to the charging station. Charge
your Robot for at least 8 hours before using it for the first time.
|
To start cleaning, just press the AUTO cleaning mode on the Robot or the
start/ pause button on the remote control.
|
Selecting the AUTO cleaning mode, Robot automatically calculates the best path
to fully clean your room.
|
For optimum performance, empty the dust container after every use.
|
For optimum performance, clean the filter after every use.
|
Remove the mopping cloth from the bottom part of the water tank. Open the
water tank’s rubber cap, fill it up with water and close it again.
|
Align the water tank with the robot’s bottom part and push it into its correct
position until you hear a click indicating it is properly fixed.
|
After mopping, open the rubber cap and pour the remaining water out of the
tank.
A quick guide to Remote Control
Always refer to the user manual for more information
Documents / Resources
|
HOOVER HGO 300 Hydro Robot
Vacuum
[pdf] Instruction Manual
HGO 300, Hydro Robot Vacuum
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>