REALCRAFT Soft Stop Barn Door Installation Guide
- June 3, 2024
- REALCRAFT
Table of Contents
Soft Stop Barn Door
Installation Guide
Soft Stop Barn Door
For detailed instructions go to bit.ly/soft-stop
STEP 1.
ATTACH THE SOFT STOP TO THE BRACKET
Note: 1/8″ Spacers are only needed for tracks with more than 4 holes.
STEP 2.
ATTACH THE SOFT STOP AND BRACKET TO THE TRACK SYSTEM
STEP 3.
ATTACH THE TRACK TO THE WALL OR LEDGER BOARD.
HANG THE DOOR AND MOVE IT TO THE END OF THE TRACK OR DESIRED POSITION.
ATTACH THE TRIGGER BETWEEN THE TABS OF THE ACTUATOR. ADJUST THE TRIGGER HEIGHT
IF NEEDED.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>