PCE INSTRUMENTS PCE-RDM 5 Geiger Muller Counter Instruction Manual
- June 7, 2024
- PCE Instruments
Table of Contents
PCE INSTRUMENTS PCE-RDM 5 Geiger Muller Counter
PCE-RDM 5
Thank you for purchasing this product, please read the instruction manual carefully before using this product.
Button and function description:
- Shutdown/Pause button/Return to the main interface Press and hold for 2 seconds to shut down/start up. Du ring startup, click to pause or continue real-time detection. Clicking this button on any interface other than the main interface is the function of returning to the main interface.
- Page-turning button Click to switch three functional interfaces in a loop Real-time data>Maximum+Average+ Total >Histogram
- Mute/vibration/off screen Click to cycle through the reminder mode: only so und reminder-only vibration reminder-sound and vibration reminder-close all reminders Lang press: off screen Press any button to wake up du ring off screen
- Set the alarm value Short press to enter the alarm value setting: click once is the maximum value alarm, click again is the total amount alarm. Leng press in these two interfaces to enter the setting, and click the page button to select the alarm value. Short press this button again to saveand exit. When setting the alarm value interface, if there is no operation for 5 seconds or a short press of the 1 button, the current settings will be saved and exited to the main interface.
- Display
- sound alarm on/off icon
- Vibration alarm on/off icon
- Real-time value pause/resume icon 9.Boot time
- Battery reminder
- page navigation bar
- Charging Type-C port
- Portable Lanyard 14.Light reminder alarm
Product introduction
Y-M06 is a small high-sensitivity radiation dose alarm, mainly used to monitor X-rays, gamma rays and hard beta rays.The instrument uses an energy- compensated GM countertube as a detector, which has the characteristics of high sensitivity, streng anti-interference ability, and accurate measurement. lt adopts a powerful microprocessor and is equipped with a TFT display screen, which makes the operation easier. The product itself has three alarm modes: sound, flash and vibration, and the alarm threshold can be set arbitrarily. When the alarm threshold is reached, an alarm will be issued to remind the staff to pay attention to safety. The main technical indicators of the instrument conform to international standards.
Application
Widely used in harne decoration radiation, irradiation processing enterprises, health and epidemic prevention, radiotherapy, nuclear power plants, import and expert commodity inspection, building materials, petrochemical, geological census, scrap steel, industrial non-destructive testing and other ionizing radiation environment.
Radiation Dose Limits
Dose limits for personnel in the radiation industry:
Exposure to radiation sources by members of the public, including exposure from authorized sources and practices and exposure received in intervention situations, but excluding occupational exposure, medical exposure and exposure to normal local natural background radiation.
Technical parameters
Pay attention
- This product contains lithium battery, please use standard DC-SV power supply to charge
- Do not use this product in a high temperature and high humidity environment to avoid inaccurate data or circuit failure
- Do not use this product in an ultra-high radiation environment to avoid damage to the sensor
- This product is not waterproof, please do not immerse water droplets or use it underwater
- This product contains precision electronic components, do not pierce needles or sharp objects into the product
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>