FORCE Bull Hue MIPS Road MTB Helmet Instruction Manual

FORCE Bull Hue MIPS Road MTB Helmet

Product Information

Specifications:

• Product Models: BULL, BULL HUE, BULL HUE MIPS
• Languages: CZ, SK, EN, RU, RO, LT, HU, IT, SLO, BG, DK, ES, SE

Product Usage Instructions

Correct Helmet Fit:

1. Look upwards to ensure only the edge of the helmet is visible.
2. Attach the side straps just below the ears in the shape of a ‘Y’.
3. Fasten the strap and open your mouth wide; you should feel the helmet pulling down.

Proper Helmet Adjustment:
For non-integral helmets:

1. Look upwards and make sure only the helmet’s edge is visible.
2. Attach the side straps in a ‘Y’ shape just below the ears.
3. Secure the strap and open your mouth wide to feel the helmet pulling down.

Frequently Asked Questions (FAQ):

• Q: Can these helmets be used for other sports besides cycling?
  A: These helmets are specifically designed for cycling and may not provide adequate protection for other sports. It is recommended to use them as intended.

• Q: How do I clean my helmet?
  A: Use a mild soap and water solution to gently clean the helmet’s surface. Avoid harsh chemicals or abrasives that may damage the helmet’s integrity.

INSTRUCTIONS FOR USE

• This is a helmet for cyclists protecting the top of the user’s head.
• Suitable for cycling or scooter riding.
• This product is personal protective equipment whose primary function is to protect the top of the user’s head from hazards that may arise during cycling and scooter riding activities.
• The device protects the head from impacts where part of the impact energy is absorbed by the helmet, thereby reducing the impact energy to which the head is exposed.
• The protection provided by the helmet depends on the circumstances surrounding the injury and cannot always protect against injury.
• The helmet only protects if it is well seated on the head.
• The buyer must try on different sizes and choose a helmet that ­ts his or her head securely and comfortably.
• With the help of spare padding (not applicable for integral helmets), the internal size can be adjusted to the optimum shape.
• The helmet must be adapted to the user.
• Correct routing of the strap under the chin without covering the ears is essential.
• The buckle, when properly adjusted, should ­t snugly and comfortably under the chin (away from the jaw) so that the helmet stays on the head in the event of a fall.
• The straps and buckle must be comfortably and ­rmly adjusted.
• The helmet must not be worn too far back and must ­t to protect the front of the head.
• Original helmet components must not be removed or altered under any circumstances.
• Do not expose the helmet to temperatures exceeding 60°C, and do not clean it with synthetic agents (lukewarm water is sufficient).
• Helmets damaged by a fall must no longer be used! The helmet must not be used for activities other than those for which it is intended (do not use it when riding a motorcycle)!
• Warning! This helmet is not to be used by children when climbing and other activities in which there is a risk of strangulation/hanging by the helmet in the event of a child falling!
• Never pull over the stop when adjusting the wheel!
• If the helmet has been subjected to a severe impact the damaged piece must be replaced and disposed of.

Select the correct helmet size according to the head circumference in cm. The above also applies to integral cycle helmets about their construction and speci­cation. We declare that this cycle helmet complies with Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment. Noti­ed body involved in the conformity assessment of PPE: Tele­cation BV, Edisonstraat 12A, 6902 PK Zevenaar, Netherlands. NB 0560. TR: SZHH01365243. The current declaration of conformity can be found on the website www.force.bike in the “Documents to download” section for the product in question. Importer: KCK Cyklosport-Mode s.r.o., Bartošova 348, 765 02 Otrokovice-Kvítkovice, Czech Republic

Correct fi­t of the helmet (points 1 and 2 do not apply to integral helmets):

1. Look upwards to make sure you can only see the edge of the helmet.
2. The side straps should be attached just below the ears, in the shape of a ‘Y’.
3. When you fasten the strap and open your mouth wide, you should feel the helmet pulling down.

PRODUCER
SHENZHEN BAOJIALI SPORTS EQUIPMENT CO., LTD, NO.6 NANHUAN ROAD,
SHIJIA COMMUNITY, MATI AN STREET, GONGMING TOWN, GUANGMING AREA, SHENZHEN CITY

IMPORTER
KCK CYKLOSPORT-MODE S.R.O., BARTOŠOVA 348, 765 02 OTROKOVICE-KVÍTKOVICE, CZ
WWW.KCKCYKLOSPORT.CZ
WWW.FORCE.BIKE

References

• KCKCYKLO | KCKCYKLO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>