VISTATECH NV-08677 RGB Bluetooth Speaker with Alarm Clock User Manual

: June 8, 2024
: VISTATECH

Table of Contents

NV-08677 RGB BLUETOOTH SPEAKER with ALARM_200x140mm
RECHARGEABLE

NV-08677 RGB BLUETOOTH SPEAKER with ALARM_200x140mm

Size: 200mm (W) x 140mm (H)

RECHARGEABLE

RGB WIRELESS SPEAKER

With Phone Charger & Alarm Clock

User Manual

Thank you for choosing our product. Please read this manual before use and keep it for future reference.

Technical Parameters:

Battery Type: Lithium battery 300mAh
Main Function: Bluetooth, TF, USB, Aux, Wireless charging
Size: 6.1″ W x 6.1″ H x 2.1″ D
Speaker Size: 1.6″
Speaker Resistance: 40Ω
Speaker Output Power: 3W
Wireless Charge Power: 5W
Power Input: DC 5V/2A

Warnings:

Always use the factory-supplied Type-C USB cable provided with this device.
Ensure the device is placed on a flat surface during use.
Avoid exposing the product to moisture or extreme heat.
Do not subject the product to extreme force or shock.
Do not disassemble or modify the product in any way.
During wireless phone charging, ensure there are no metal or magnetic objects within 6 cm of the center of your phone.
Charging speed may vary based on temperature; it is higher at lower temperatures.
Clean the product with a slightly damp cloth.

Packaging Includes:

Rechargeable RGB Wireless speaker
Type-C USB Charging Cable
User Manual

WARNING

Power Supply Cable

Always use only the factory supplied Type-C USB cable that came with this device. Do not use any other micro USB cable.
Use of another Type-C USB cab’e can result in overheating, melting, fire, personal Injury or death from fire or damage to your device.

Printed in China

Key Function Operation Instructions:

Power On/Off: Press and hold the (2) button for 2 seconds to turn the device on and off. The default light is warm when turned on.
Clock Setting: Hold the (4) button for 1 second to set the clock. Adjust hours with the (3) and (1) buttons, and minutes with the (2) button. Wait 3 seconds to save settings.
Alarm Setting: Double press the (4) button to enter alarm clock mode. Adjust hours and minutes as in the clock setting. Wait 3 seconds to save settings.
Alarm Function: The alarm turns off automatically after 5 minutes. Manually turn off the current alarm with the (4) button. To disable the alarm, double press the (4) button to enter clock mode.
Light Mode: Press the (4) button to turn on the light. Press repeatedly to switch between 8 lighting modes. 6 Sunrise Simulation: Turn off the device, then press and hold the (2) button after setting the alarm. A warm wake-up light and alarm will activate at a set time.
Press the (4) button 3 times to switch between 12/24 hour mode.
Time Format: Press the (4) button 3 times quickly to switch between 12/24 hour mode.
Bluetooth Speaker: Use buttons (1) and (3) to navigate tracks and adjust volume. Press the (2) button to play/pause. Answer calls with the (4) button.
Wireless Charging: Place the phone in the center of the wireless charging area. Use only with cases thinner than 2 mm.

Wireless Charging Usage:

Insert the charger to activate wireless charging automatically.

Bluetooth Function Usage:

This audio system supports Bluetooth devices with an A2DP function. Turn on the device, and press and hold the (2) button to enter Bluetooth mode. The Bluetooth indicator flashes blue, accompanied by a voice prompt. In this state, the audio system awaits pairing and connection. Pair and connect to the Bluetooth audio system only in this mode.

Mobile Phone Connection:

Step 1: Enable Bluetooth in phone settings and search for devices.
Step 2: When “NV-08677” appears, the phone has detected the Bluetooth audio system. Click “NV-08677” to enter pairing mode. Once successfully paired, a voice prompt confirms connection.

TF Card / USB Drive Function Usage:

Insert TF card / USB drive into the card slot. A corresponding voice prompt will confirm detection. The product automatically reads and plays audio files from the card. Use buttons (1) and (3) to control music volume and sound.

Safety Instructions:

Avoid exposing the product to water or damp areas, such as bathrooms.
Handle the product with care and avoid forcefully hitting or dropping it to prevent damage.
When not in use for an extended period, please turn off the power.

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.