ANKER A9121 PowerPort Strip 2 mini User Manual
- June 6, 2024
- Anker
Table of Contents
ANKER A9121 PowerPort Strip 2 mini
Overview
-
Power Light
-
AC Outlet
-
USB Outlet
Using Your PowerPort Strip
- When the PowerPort Strip is connected to the power outlet, the Power Light is on.
Safety
- Do not connect PowerPort Strip to an ungrounded outlet.
- Do not use with extension cords.
- Do not exceed electrical ratings.
- Use in dry locations and indoors only.
- Install PowerPort Strip away from heat-emitting appliances such as radiators.
- Keep children away from PowerPort Strip.
Specifications
| AC Input | 125V AC 60Hz 10A |
|---|---|
| AC Output | 125V AC 60Hz 10A 1250W |
| USB Input | 100-240V ~ 50/60Hz |
| USB Output | 5V 4.8A (2.4A Max Each Port) |
| Size | 80 x 80 x 34 mm / 3.1 x 3.1 x 1.3 in |
| Weight | 320.6 g / 11.3 oz |
| Cable Length | 1.5 m / 5 ft |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730,
US
Telephone: +1 (909) 484 1530
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610
Nathan Road, Mongkok, Kowloon,
Hong Kong
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>