CONO 2 Shades Pendant Light Instruction Manual
- September 2, 2024
- CONO
Table of Contents
CONO 2 Shades Pendant Light
Specifications:
- Model : CONO
- Type : Pendant Light
- Shade Options : 2 Shades or 3 Shades
- Certifications : EU/SAA, cUL
- Intended Use: Interior
Product Usage Instructions
-
Step 1: Installation
DECIDE THE LENGTH OF THE CORD AND MOUNT THE CEILING ROSE BRACKET USING THE WALL PLUGS AND SCREWS **** -
Step 2: Mounting
MOUNT THE CEILING ROSE TO THE BRACKET USING THE SMALL SCREW BOLTS. THEN INSERT SUITABLE LIGHT BULBS.
Safety Instructions
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. THE LAMP IS ONLY INTENDED FOR INTERIOR USE. LAMP EXTERIOR CAN GET HOT AFTER PROLONGED USE. ENSURE THE BULB HAS FULLY COOLED BEFORE ATTEMPTING TO REMOVE IT. PROTECT FROM CONTACT WITH LIQUIDS. DO NOT PLACE THE CABLE IN REACH OF SMALL CHILDREN OR ANYWHERE THERE IS A RISK OF FALLING OVER IT.
WARNING : MUST BE INSTALLED BY A LICENCED ELECTRICIAN.
PENDANT W/ 3 SHADES
-
1: Installation
- DECIDE THE LENGTH OF THE CORD AND MOUNT THE CEILING
- ROSE BRACKET USING THE WALL PLUGS AND SCREWS
-
Step 2: Mounting
MOUNT THE CEILING ROSE TO THE BRACKET USING THE SMALL SCREW BOLTS. THEN INSERT SUITABLE LIGHT BULBS.
SAFETY INSTRUCTIONS
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. THE LAMP IS ONLY INTENDED FOR INTERIOR USE. THE LAMP EXTERIOR CAN GET HOT AFTER PROLONGED USE. ENSURE THE BULB HAS FULLY COOLED BEFORE ATTEMPTING TO REMOVE IT. PROTECT FROM CONTACT WITH LIQUIDS. DO NOT PLACE THE CABLE IN REACH OF SMALL CHILDREN OR ANYWHERE THERE IS A RISK OF FALLING OVER IT.
WARNING : MUST BE INSTALLED BY A LICENCED ELECTRICIAN.
FAQ
Q: Can I use LED bulbs with this pendant light?
A: Yes, you can use suitable LED bulbs with the CONO pendant light.
Q: What is the maximum wattage for the light bulbs?
A: The maximum wattage for the light bulbs is 60W per shade.
Q: Can I adjust the length of the cord?
A: Yes, you can adjust the length of the cord during installation to suit
your needs.