edelkrone Headplus V2 Video Expert User Manual
- June 6, 2024
- Edelkrone
Table of Contents
edelkrone Headplus V2 Video Expert
What’s in the Box & the Basics
- HeadPLUS
- Cold shoe ports
- Laser Module connection port
- Link connection port
- Link connection port
- Shutter trigger port
- DC IN socket
- Safety Lock
- 3/8″ -1 6 mounting port
- Balance piece
- L-Bracket with 1/4″-20 mounting screw
- Safety lock
- Information Screen
- On/Off Button
- Safety Lock
- Width extenders for SliderPLUS
- 2.5 mm & 3 mm allen keys
Attaching L-Bracket to Camera
- Loosen the knob.
- Remove the L-Bracket and flip horizontally.
- Place the L-bracket back.
- Tighten the knob.
- Attach your camera to L-Bracket by turning the mounting wheel on it.
Finding Center of Gravity
- Remove the balance piece and place it as indicated above.
- Hold your setup from the balance piece with your index finger as shown above.
- Slide the rods on related dashed axes’ lines and find the best position where your camera is balanced on your finger. This position gives the center of gravity of your camera for Pan & Tilt axes.
Mounting The HeadPlus
- Align HeadPLUS with any 3/8″- 6 mounting screw.
- Tighten it using the mounting wheel.
- Attach the L -Bracket to Head PLUS.
- Tighten the screw to lock.
- Attach the width extenders to SliderPLUS if you are using HeadPLUS with SliderPLUS.
Mounting a Battery Bracket on HeadPlus
Depending on your choice of battery type, you need to mount the related battery bracket with 2 screws to HeadPLUS. Battery brackets are sold separately.
Manual Tension Adjustment For Pan/Tilt
- Use the 3 mm allen key to adjust the manual adjustment tension of HeadPLUS Pan/Tilt.
- If you are not able to move Pan&Tilt axes manually, try loosening the tension. Make as little adjustments as possible.
! If you’d like to make adjustments on your setup or carry your HeadPLUS, make sure the
Safety Locks are on. Otherwise, the device will be unstable and may cause danger.
Start Using
- Download the edelkrone App to your mobile device from the App Store or Google Play. Links can be found at www.edelkrone.com/products/headplus-v2
- To operate HeadPLUS, hold On/Off button down until the opening bar in the information screen is full-filled.
- HeadPLUS is now ready for smart pairing or manual pairing through Bluetooth/Wifi.
- After pairing the devices, you are now ready to use your HeadPLUS.
- Just keep following the instructions on your mobile device or visit manuals.edelkrone.com for a detailed! video instruction.
| Always start using with a fully charged batteries.
---|---
| Make sure your mobile device’s Bluetooth connection is on.
Should the product become damaged beyond repair, or if you wish to dispose of
it, it must be disposed separately from the municipal waste stream via
designated collection facilities appointed by the government or the local
authorities. Observe the regulations of your area and country that relate to
the disposal of electronic products.
Keep your electronic Motion Control Unit away irom all sorts of
liquids.
In order to preserve your Motion Control Unit and battery performance
at their best, use the exact same type of batteries with an equivalent level
of charge during dual battery operation.
Do not attempt to disassemble or modify any internal parts of your
Motion Control Unit. If the device appears to be malfunctioning, discontinue
use immediately and contact support for qualified service.
Never force a different type of connector into a port.
Never use or store your Motion Control Unit in areas subject to extreme
temperatures, or high levels of vibration.
If your motion control unit becomes unresponsive, disconnect and
reconnect the power source. Make sure your DC adapter is plugged in or your
batteries are properly charged. If the problem persists, contact our support
team.
Environmental factors may affect your Motion Control Unit’s
performance. Keep your product away from environmental hazards such as dust or
heavy resonance. Do not use chemical materials to clean your product.
If there is an impairment on the power or connector cable, stop using
the Motion Control Unit immediately.
Avoid dropping or causing physical damage to your Motion Control Unit.
Do not place heavy objects on top of your Motion Control Unit.
** edelkrone cannot be held responsible for damage caused by improper use
or modification of the product.
***** Rated Voltage: 7.4V-14.8V (7.4V LP-E6 Battery/ AC-DC Adapter) Rated
Current: 2A Operating Temperature: -5°C to +45°C
Before operating your edelkrone, please watch the user’s manual video.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>