edelkrone Controller V2 Remote Control User Manual

Controller V2 Remote Control
User Manualhttp://edel.kr/ctrllrv2

Before operating your edelkrone, please watch the user’s manual video from the link below

WHAT’S IN THE BOX & THE BASICS

1. Information screen
2. Select button
3. Menu Navigation
4. Keypose buttons
5. On/Off button
6. Menu button
7. Link port
8. Wrist Strap

INSERTING THE BATTERIES

*Batteries sold separately

START USING

Select Wireless to connect wirelessly to the edelkrone devices.
For a wired connection, connect the edelkrone Controller v2 and the edelkrone device with a 3.5mm to 3.5mm link cable using the Link port and select Wired.
Use the arrow keys to choose either option and press the select button to proceed.

CONNECTION SCENARIOS

Select Pair and Connect to choose the edelkrone device you want to connect to from the available devices list.
Once the devices are paired, you can Join a Paired Group by selecting this option from the menu.

PAIRING SCREENS

1.  Available Devices List
2. Connection Signal of the Devices

Pair and Connect Screen
Choose the devices you want to pair using the arrow keys and press the Select button. Then, push the right navigation button to go to the control screen.

1. The Master Device of the Paired Group

Join a Paired Group Screen
If you already have paired devices, the master device of the paired group will be on this list. Choose the paired group you want to join using the arrow keys and press the Select button. Then, push the right navigation button to go to the control screen.
*Based on your firmware, you can get the latest guide from edel.krictrfinf2 or the OR code on pg.7

AXIS & KEY POSE SETTINGS

1. Battery Level Indicator
2. Connection Indicator
3. Pan & Tilt Settings
4. Key poses

A. Axis Control Screen
You can adjust the pan & tilt, swing, slide, and focus movements from this screen using the arrow keys on your Controller v2.
You can switch axis selection by pressing the select button.
Key poses
There are three key pose slots under the pan & tilt settings.

SPEED & ACCELERATION SETTINGS

5. Speed-Acc. Settings
6. Speed-Acc. Level

B. Speed & Acceleration Control Screen
You can adjust the speed and acceleration from this screen using the navigation buttons.
Press the saved key pose buttons to start moving your devices.
C. Loop Screen

1. Moving Keyposes or
2. Movement Loop Navigation Duration

 ON/OFF BUTTON & MENU SCREEN

To switch off, Hold On/Off button down until the shutdown text disappears.
You can go to the menu by pushing the menu button on any screen. Menu Screen There are three options on this screen: -Battery Status
Displays the battery levels of Controller v2 and the paired devices.
-Settings / Info
Set Auto Power Off and Auto Power Saving Time. Or, see information on your Controller v2 (Serial number, version, and more).
-Firmware Update
When your smartphone alerts you of a firmware update, go to Menu/Firmware Update and follow the instructions on the edelkrone App.
Based on your firmware, there may be minor differences in the product interface you have.
You can get the latest guide from edel.kr/fw-ctrllrv2 or the QR.

http://edel.kr/fw-ctrllrv2

ACTIVATING GESTURE MODE

1. To activate gesture mode, connect an edelkrone device.
2. Push the menu button and select the Advanced Features option.
3. Select Gesture mode.
4. Switch the option OFF to ON. From now on, gesture mode is activated.

CALIBRATING FOR GESTURE MODE

1. To start using gesture mode, press and hold the select button on the motion control screen.
2. For the controller to calibrate itself, put controller on a flat surface and keep pushing the select button.
3. Keep the controller still until the progression bar is completed.

GESTURE MODE

On the gesture mode screen, the progression bar indicates the speed and direction of the motion. To use gesture mode, press and hold the select button and do the following axis moves.

DISPOSAL OF THE PRODUCT & WARNINGS

Should the product become damaged beyond repair, or if you wish to dispose of it, it must be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Observe the regulations of your area and country that relate to the disposal of electronic products.

• Keep your electronic unit away from all sorts of liquids.
• In order to preserve your Controller v2 and battery performance at their best, use the exact same type of batteries.
• Do not attempt to disassemble or modify any internal parts of your Controller v2. If the device appears to be malfunctioning, stop using it immediately and contact support for qualified service.
• Never force a different type of connector into the link port.
• Never use or store your Controller v2 in areas subject to extreme temperatures, or high levels of vibration.
• If your Controller v2 becomes unresponsive, disconnect and re-connect the power source. Make sure your batteries are properly charged. If the problem persists, contact our support team.
• Environmental factors may affect your Controller v2’s performance. Keep your product away from environmental hazards such as dust or heavy resonance. Do not use chemical materials to clean your product.
• The use of an inappropriate power source may permanently damage your Controller v2.
• Avoid dropping or causing physical damage to your Controller v2.
• edelkrone cannot be held responsible for damage caused by improper use or modification of the product.
• Rated Voltage: 2.4V (2×1.2V M Battery) Rated Current: 0.5A Operating Temperature: -5°C to +45°C

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>