edelkrone FocusOne v2 Designed for Camera User Manual

June 5, 2024
Edelkrone

edelkrone - logofilmmaking solutions

FocusOne v2 - logo

USER’S MANUAL
Before operating your edelkrone, please watch the user’s manual video from the link below.

http://edel.kr/fcov2

WHAT’S IN THE BOX & THE BASICS

edelkrone FocusOne v2 Designed for Camera - Box

1. Hard stops
2. Accessory port
3. Control wheel
4. Control wheel angle adjustment
5. Thumbscrew
6. 15 mm rod adapter
7. 19 mm rod clamp| 8. Focus point marker
9. 0.8 pitch gear
10. Marking disc screw
11. Tension adjustment screw
12. Lens Gear PRO
13. 2.5 mm Allen key
---|---

ATTACHING THE LENS GEAR PRO

If you have a cine lens, you don’t need to attach Lens Gear PRO and may skip this step. If you don’t have 0.8 pitch on your lens, attach Lens Gear PRO to your lens.

A detailed video explaining how to attach the Lens Gear can be found at https://edel.kr/fcov2

MOUNTING DIAMETERS

edelkrone FocusOne v2 Designed for Camera - Diameters

You can attach FocusONE v2 to 15 mm or 19 mm industry standard rods. The 15mm rod adapter comes ready to use on the product.

  1. To attach the 19 mm rod, loosen the knob.
  2. Push the 15 mm adapter out from the narrow diameter side.
  3. Attach FocusONE v2 to 19 mm rod.

A detailed video explaining the mounting process can be found at https://edetkr/fcov2

ADJUSTABLE PARTS

edelkrone FocusOne v2 Designed for Camera - Parts

FocusONE v2 has a focus point indicator and hard stop limiter These parts can be positioned as you want by loosening the screws with the help of the 2.5 mm Allen key. Then, tighten the screws to fasten the parts.

A detailed video explaining the mounting process can Be found at https://edel.kr/fcov2

ATTACHING THE HARD STOPS

edelkrone FocusOne v2 Designed for Camera - Hard

To attach hard stops:

  1. Unscrew the hard stop from the hard stop parking hole.
  2. Screw the hard stop into the hard stop hole on the focus wheel.
  3. To fix your focus points, first, loosen the hard stop, set your focus point, then tighten the hard stop.

A detailed video explaining the mounting process can be found at https://edel.kr/fcov2

MOUNTING YOUR FOCUS ONE v2

edelkrone FocusOne v2 Designed for Camera - mounting

  1. Attach FocusONE v2 to your 15 mm or 19 mm rod.
  2. Make sure that the gear on your FocusONE v2 is aligned with the gear on your lens.
  3. Tighten the thumbscrew as you push FocusONE v2 toward your lens.

**** To increase precision, make sure there are no gaps between the gears.
A detailed video explaining the mounting process can be found at: https://edel.kr/fcov2

SETTING THE CONTROL WHEEL ANGLE

edelkrone FocusOne v2 Designed for Camera - control
wheel

The control wheel can be adjusted to fit your shooting style.

  1. Loosen the thumbscrew.
  2. Set your angle and tighten the thumbscrew.

A detailed video explaining the control wheel can be found at: https://edel.kr/fcov2

CHANGING SETUP TO RIGHT SIDE OF THE CAMERA LENS

edelkrone FocusOne v2 Designed for Camera - Camera
lens

  1. Remove the thumbscrew.
  2. Place it on the opposite side as shown above. Do not tighten the thumbscrew too much, leave it loose.
  3. Rotate the hard stop limiter upside down 180°.

A detailed video explaining the control wheel can be found at https://edet.kr/fcov2

  1. Push the rod clamp to the right side as shown.
  2. Rotate the control wheel to the left 180 degrees.
  3. Tighten the thumbscrew. Now FocusONE v2 is ready to use on the right side of the camera lens!
  4. edelkrone brand logo part is rotatable. You can rotate it according to the direction of your installation.

A detailed video explaining the control wheel can be found at: https://edel.kr/fcov2

MARKING YOUR FOCUS POINT

edelkrone FocusOne v2 Designed for Camera - Focud

The best way to use your FocusONE v2 is to find your focus point with the control wheel and align the disc with the focus point marker as precisely as possible with your hand. This means you marked your focus point. Now you can leave and return to your focus point as you like.

A detailed video explaining the marking your point process can be found at https://edel.kr/fcov2

ADJUSTING THE CONTROL WHEEL TENSION

edelkrone FocusOne v2 Designed for Camera - tension

You can easily adjust the control wheel tension by tightening or loosening the tension adjustment screw. While checking the play from the control wheel, tighten or loosen the screw to a point that is still comfortable to control the wheel.

The tension adjustment may not be noticeable on stiff camera lens rings.
The tension adjustment does not work above a certain level of stiffness and cannot be used as a locking mechanism.

A detailed video explaining how to adjust the tension can be found at : https://edel.kr/fcov2

DISCLAIMER

edelkrone cannot be held responsible for damage caused by improper u.se or modification of the product. iinhfiipnnsgionedaeggs on FocusONE v2, please watch the user’s manual C0119 video: sorbet

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals