edelkrone Vision Module for HeadPLUS User Manual
- June 5, 2024
- Edelkrone
Table of Contents
**
edelkrone Vision Module for HeadPLUS**
TABLE OF CONTENTS
- WHAT’S IN THE BOX & THE BASICs
- ATTACHING VISION MODULE TO HEAD PLUS V2/HEAD PLUS v2 PRO
- ATTACHING VISION MODULE TO HEAD PLUS V2/HEAD PLUS v2 PRO (CONT
- POWER CONNECTION
- LINK CONNECTION
- HDMI CONNECTION
- VISION MODULE COLD SHOE ASSEMBLY
- COLD SHOE SCENARIOS
- START USING
WHAT’s IN THE BOX & THE BASICS
- Vision Module
- Antenna
- AUDIO OUT port
- LINK port
- On/Of button
- Information screen
- DC IN port
- HDMI IN port
- HDMI OUT port
- USB port
- 3 mm Allen key
- 2.5 mm Allen key
- 2 mm Allen key
- M4x16 SHCS
- M3x30 FHCS (x2)
- Cold shoe adapter
- 3.5 mm to 3.5 mm link cable
- Cable tie
ATTACHING VISION MODULE TO HEAD PLUS V2/HEADPLUs v2 PRO
Hemove the plastic cOver with the help of a pointed object, such as a pen.
ATTACHING VISION MODULE TO HEADPLUS V2/HEADPLUS V2 PRO (CONT.)
- Mount your Vision Module to HeadPLUS v2 /HeadPLUS v2 PRO as shown above using the two MBx30 FHCS that comes in the product box.
- Mount your battery bracket to Vision Module with 2 Screws. Battery brackets are sold separately.
(Supported battery brackets: Gold Mount, V-Mount, Canon LP-E6, Sony NP-F
POWER CONNECTION
- Plug the battery bracket power cable into the DC IN port of Vision Module.
- Plug the power cable of Vision Module into the DC IN port of HeadPLUS v2 or HeadPLUS v2 PRO.
LINK cONNECTION
HDMI CONNECTION
Connect Vision Module and HeadPLUS v2 or HeadPLUS v2 PRO by plugging the 3.5 mm to 3.5 mm Link Cable provided into the LINK ports located on each device.
VISION MODULE COLD SHOE ASSEMBLY
lo mount your Vision Module to a camera hot shoe or any cold shoe, mount the
cold shoe parts to yOur Vision Module using M4x16 SHCS that comes in the
Product box
COLD SHOE SCENARIOS
(Tripod cold shoe adapter sold separately.)
START USING
- Download edelkrone App to your mobile device from the App Store or Google Play. Links can be found at www.edelkrone.com/products/vision-module
- Power up your Vision Module, HeadPLUS v2/HeadPLUS v2 PRO and camera. To operate Vision Module, hold the On/Off button down until the opening bar in the information screen is completed.
- Vision Module is now ready for smart pairing or manual pairing via Bluetooth/Wif.
- After pairing the devices, you are now ready to use your Vision Module. Just keep following the instructions on your mobile device or visit manuals.edelkrone.com
- for detailed video instructions.
warning: Always start using fully charged batteries.
warning: Make sure your mobile device’s Bluetooth connection is on.
A detailed video explaining the ede lkrone App can be found at:
http://edel.kr/vnm
DISPOSAL OF THE PRODUCT & WARNING
Should the product become damaged beyond repair, or if you wish to dispose of
it, it must be disposed separately from the municipal waste stream via
designated collection facilities appointed by the government or the local
authorities. Observe the regulations of your area and country that relate to
the disposal of electronic products.
CE
- Keep your electronic Motion Control Unit away from all sorts of liquids,
- In order to preserve your Motion Control Unit and battery performance at their best, use the exact same type of batteries With an equivalent level of charge during dual-battery operation
- Do not attempt to disassemble or modify any internal parts of your Motion Control Unit. If the device appears to be malfunctioning, disContinue use immediately and contact support for qualified service.
- Never force a different type of connector into a port.
- Never use or store your Motion Control Unit in areas subject to extreme temperatures, or high levels of vibration.
- If your Motion Control Unit becomes unresponsive, disconnect and re-connect the power source. Make sure your DC adapter is plugged in or your batteries are properly charged. If the
- problem persists, contact our support team.
- Environmental factors may affect your Motion Control Unit’s performance. Keep your product away from environmental hazards such as dust or heavy resonance. Do not use chemical
- materials to clean your product If there is an impairment on the power or connector cable, stop using the Motion Control Unit immediately.
- Avoid dropping or causing physical damage to your Motion Control Unit.
- Do not place heavy objects on top of your Motion Control Unit. edelkrone cannot be held responsible for damage caused by improper use or modification of the product.
- Rated Voltage: 9V Rated Current: 2A
- Operating Temperature: -5°C to +45°C
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>