Polaroid PRD 009019 I-Typefilm Printer User Guide
- June 6, 2024
- Polaroid
Table of Contents
Quick Start Guide
Before you get started.
| I Charge the Polaroid Lab before use
---|---
| II The Polaroid Lab only works with the Polaroid app. Download it from the
App Store or Google Play Store
| III The Polaroid Lab is compatible with Polaroid i-Type and Polaroid 600
type film
| IV For best results, remove the screen protector and cover from your
smartphone. Check that your phone’s screen is clean. Cracks and scratches on
your screen will influence picture quality
Phone to PolaroidTM
| 
|
---|---|---
01 Remove the cover from the platform. Turn the Polaroid Lab on by
pressing the platform release button on the right side of the Lab. The phone
platform will automatically lift into a ready position. Check that the rainbow
LED is lit up.| 02 Gently pull down on the film door to open it.|
03 Polaroid Lab03 Insert the film pack with the Darkside cover facing up.
Use only Polaroid i-Type or Polaroid 600 type film.
|
|
04 Close the film door. The darkslide will eject automatically beneath
the film shield. Lift the film shield and allow it to roll back up, then
remove the darkslide.| 05 Open the Polaroid app and tap on the `Polaroid
Lab’ option. Follow the instructions on the app to select the picture that
you would like to use.| 06 Place your phone on the Polaroid Lab
platform with the screen facing down. Ensure that your phone is aligned
lengthways and the top of your phone is facing the top of the platform.
Remove any screen protector or phone cover, as this can impair final results.
|
|
07 The Polaroid Lab will detect your phone on the platform. The rainbow
LED will slowly blink three times and then stay on. If the rainbow LED blinks
rapidly, realign your phone. Once the blinking stops, press the red shutter
button on the front of the Polaroid Lab.| 08 Your photo will eject
beneath the film shield. After five seconds, lift the film shield, allow it
to retract into the Polaroid Lab, and then gently remove your photo.| 09
Don’t shake or bend the photo! Shield it from light (in a pocket, or face
down on a flat surface) until the image begins to emerge – black & white
photos take 5-10 minutes, while color pictures take 10-15 minutes.
https://www.polaroid.com/app-link/labmanual
Have a question you need to be answered?
Contact our Customer Support Team
USA/Canada
usa@polaroid.com
+1-212-219-3254
EU/Rest of World
service@polaroid.com
00800 5770 1500
or visit polaroid.com/help
Made in China for and distributed by Polaroid Film B.V. (P.O. Box 242, 7500
AE), Enschede, The Netherlands. Polaroid, Polaroid Lab, and Phone to Polaroid
as well as the logos the Polaroid Color Spectrum and the Polaroid Classic
Border Logo are trademarks of PLR IP Holdings, LLC, which is part of the
Polaroid group of companies. PLR IP Holdings, LLC does not manufacture this
product or provide any Manufacturer’s warranty or support. © 2020 Polaroid.
All Rights Reserved.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc. Google Play and
the Google Play logo are trademarks of Google LLC.
A Light sensor
B Platform release / ON button
C Shutter button
D Rainbow LED
E Film counter LEDs| F Film door
G Touchpoints
H Film Shield
I Battery level LEDs
J Micro-USB slot
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>