Polaroid 9035 Go Instant Mini Camera User Guide
- June 4, 2024
- Polaroid
Table of Contents
Polaroid 9035 Go Instant Mini Camera
Quick Start Guide
- Shutter Button / Déclencheur
- Lens / Objectif
- Viewfinder & Selfie Mirror / Viewfinder & Selfie Mirror
- Flash | Self-timer | Double Exposure Button / Flash | Self-timer | Double Exposure Button
- Film Door Button/ Bouton du Compartment Film
- Flash / Flash
- ON|OFF Button / Bouton Marche| Arrêt H Film Counter Display / LED du computer de photos
- Wrist Strap Loop / Peasants pour la Spangle J Photo Eject Slot / Déclencheur
www.polaroid.com/go-quickstart
- Have a problem or question?
- Contact our Customer Support Team
- USA/Canada
- EU/Rest of World
- service@polaroid.com
- 00800 5770 1500
or visit polaroid.com/help
Made in China for and distributed by Polaroid Film B.V. (P.O. Box 242, 7500
AE), Enschede, The Netherlands. Polaroid, Polaroid Color Spectrum, Polaroid
Classic Border Logo and Polaroid Go are trademarks of PLR IP Holdings, LLC,
which is part of the Polaroid group of companies. PLR IP Holdings, LLC does
not manufacture this product or provide any Manufacturer’s Warranty or
support. ©2021 Polaroid. All rights reserved.
-
Turn on the Polaroid Go camera by pressing the ON | OFF button. The film counter display will show you how many photos you have left.
It should be at ‘0’.
-
Slide the film door button across and pull the door open.
-
Match the color on the film cassette with the color indicated on the camera. Slide the thick end of the cassette in first and let it drop into place. Leave the pull tab on as you will need that later to remove the empty film pack.
-
Close the film door until it clicks. The darks ide covered by the film shield will eject.
-
Remove the darks ide and allow the film shield to roll back in.
-
Aim at your subject and press the shutter button. The flash will trigger automatically. Be careful you don’t cover the flash with your finger
-
Try a selfie. The viewfinder has its own reflective selfie mirror. Place yourself in the middle of it then take the photo.
-
The photo will eject underneath the film shield. Leave it there for 5 seconds. Then gently lift the film shield and let it roll back in. Remove the photo.
-
Don’t shake the photo! Place your photo in a dark place or face down on a flat surface to shield it from light. Follow the development time on the film pack.
