BLAVOR PN-W26 Solar Charger Power Bank Qi Wireless Charger User Manual

June 9, 2024
BLAVOR

BLAVOR PN-W26 Solar Charger Power Bank Qi Wireless Charger

BLAVOR-PN-W26-Solar-Charger-Power-Bank-Qi-Wireless-Charger-
PRODUCT

Thank you for choosing our Solar Charging Power Bank. In order to provide you with a better experience, we have provided detailed instructions for use.

Product Parameters

BLAVOR-PN-W26-Solar-Charger-Power-Bank-Qi-Wireless-Charger-
FIG-6

Package Include

  • 20000mAh Solar Power Bank
  • Drawstring Bag
  • Charging Cable
  • Lanyard
  • User Manual

Product Detailed Drawing

BLAVOR-PN-W26-Solar-Charger-Power-Bank-Qi-Wireless-Charger-
FIG-1

Product Specifications

  • Original A-class polymer batteries, safe and stable.
  • Wireless Portable Charger, compatible with all Qi-enabled mobile devices.
  • High capacity solar portable charger, supports multiple USB port outputs at the same time.
  • Solar charging, charge your devices anytime, anywhere.
  • LED flashlight, a must-have companion for outdoor activities.
  • 2 built-in cables, charge your devices at any time.
  • Built-in high-sensitivity FM radio chip, receive more stations, clearer sound.

Instructions

Power buttons

  • Radio power button: Press and hold for 3 seconds to turn on/off the radio function.
  • Charging power button: Press once to turn on the charging function, and press twice to turn it off. Press and hold for 3 seconds to turn on/off the LED flashlight.

How to charge the power bank:

Solar supply
Put the power bank under direct sunlight and sunlight will convert into electricity to charge built in battery automatically (strong sunlight is advised).

Note: When the temperature is high in summer, please do not place the product on the cement floor, in the car and other places where heat gathers to charge the product. When the temperature of the product exceeds 50″C, please suspend the use of solar energy to charge the machine.

Power supply
Connect the USB-C input port and wall/car adapter USB port with a cable. The LED indicators will flicker while charging, with all indicators remaining constant indicating that the power bank has been fully charged.

Charge mobile phones or other devices

Cable charging
Turn on the power button and the LED indicator will turn on. Pluga compatible cable into the power bank USB output port and the device, or use the built-in cable to charge.

Wireless charging
Turn on the power button and the wireless charging indicator in the green is on. Put your mobile phone on the wireless charging area and it will charge. If you normally use a protective case for your phone, please make sure that your phone case is not made of metal and the suitable thickness is less than 4mm.

Radio function:
Pull out the telescopic antenna, press and hold the round radio power switch for at least 3 seconds to tum on the radio. Gently press with up or press with down to semi-automatically station search. The red indicator will be flickering during the search process. When a station is found, it will automatically play the content. Short press the power switch to turn oft the sound, short press again to unmute. Turn the volume knob to the left/right to adjust the volume level, press and hold the power switch again for3 seconds to turn off the radio. The first time you use this radio charger, short press for 3 seconds the FM function will work. When the indicator light is red, it means listening to FM.

  • Do not use the wireless charging function while charging the power bank. Because that will intertere with the normal radio station search, causing a sound. This is a normal phenomenon, and is due to the power bank working when the internal chip switches frequency, causing interference to the radio’s local vibration signal.

Kickstand function:
Pull out the metal buckle and then push it upwards to make the solar radio stand.

LED flashlight function:
Press and hold the square power button for at least 3 seconds to turn on or turn off the flashlight.

Note: Please turn off the LED flashlight to save the power when you are not using the flashlight.

Product Maintenance

  1. Keep it away from moisture and corrosive substances
  2. Please do not use chemicals to clean the power bank.
  3. Please charge the power bank once every six months, especially when the product is not used for a long time.

FAQS

  • Only one blue LED power indicator flickers when the power button is pressed.
    The battery power is about to run out, please charge this product immediately.

  • Unable to charge a mobile device
    Please use another charging cable and try to charge the phone again.

Charging for a long time but it not becoming fully charged.

  • Use a charger that supports 5V/2.1A or more output.
  • Check if the button is flexible.
  • .Check if the charging indicator is normal when charging.
  • Check whether the USB input cable is good and whether there is any abnormality after connecting the charger.
  • Check whether the USB out cable is good and whether there is any abnormality when connecting the device that needs to be charged.
  • Check if there is any abnormal noise or odor in the product.
  • Please do not disassemble, otherwise it is not covered by the warranty.
  • If the steps above do not fix the issue, please contact our after-sales service department at support@blavor.com

Warning

  1. This power bank is for charging devices within DC5V/3A specifications. Devices beyond the specifications will be damaged.
  2. Keep dry and keep away from fire.
  3. Please do not charge in high temperature. Suggested temperature45°C.
  4. Please only connect devices that conforms to the output specifications of this product.
  5. If the battery swells, leaks or emits an odor, stop using it immediately.
  6. Please do not disassemble the power bank.

Warranties and After-Sales Service

  1. Every BLAVOR product is provided with 12 months of warranty from the date of purchase.
  2. Within 30 days from the date of purchase, products in good packaging and without damage can be returned and fully refunded. Please noted that customers will bear the shipping fee if products have no quality problems.
  3. A free exchange for products having quality problems within 12 months.
  4. If you are not 100%% satisfied with our products, please feel free to contact our customer service at support@blavor.com We attach great importance to customer feedback and will get back to you within 24 hours(excluding weekends).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals