CANYON BSP-7 Outdoor wireless speaker User Guide

: June 6, 2024
: CANYON

Table of Contents

Features
Package
Charging:
TROUBLESHOOTING:
Instruction for appearance
Pairing
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Guide v 1.0
Outdoor wireless speaker BSP-7

Quick guide
Wireless speaker

Features

Outdoor wireless speaker BSP-7
BT version 5.0
Working range: up to 10 m
Playing time: up to 4 h
Sources: BT, FM, AUX, USB
Power: 9 W • Transmit power per channel: <20mW
Compatibility: Win/iOS/Android

Bluetooth:

Long press the power button 9 for 2-3s. The LED light will turn blue and flash quickly.
Activate Bluetooth on your gadget and search for “Canyon BT Speaker” then connect it and pair the device. The blue LED light will flash slowly once connected successfully.
Press Play/Pause button 3 to play/pause the music.
Briefly click Previous or Next buttons 2 or 4 to skip the tracks.
Hold the buttons to adjust

Package

volume down or up.
Playing music from USB:

Long press the power button 9 for 2-3s.
Insert USB stick the slot. The speaker will start playing the stored music automatically. OR if the USB stick is already inserted, select the right mode by pressing the “MODE” button 5.
Press Play/Pause button 3 to play/pause the music.
Previous/Vol- and Next/Vol+ buttons 2,4 as in Bluetooth mode (see above)

FM:

Insert the audio cable to get the best FM signal before using it.
Turn on the speaker, select FM with the “MODE” button 5.
Briefly press Play/Pause button 3 to mute/open the speaker. Long press Play/Pause button 3 to auto search the FM Channel and store it automatically.
Press buttons 2 or 4 to select stored FM stations.

AUX-IN:
For other compatible devices use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux-In” of the speaker.

Charging:

Power off the unit, put the provided charging cable into the charging port 8, connect the other
end to any charger with 5V/1A output, the red charging indicator will remain on.
Charge time should be 3-5 hours. When fully charged, the indicator light will switch off.

TROUBLESHOOTING:

Problem

|

Solution

---|---
The Bluetooth device is not connected| Check that the speaker battery is not discharged Make sure that all devices are paired and the Bluetooth function is activated in the device.
Remove the speaker from the list of paired devices and repeat the connection process once again.
Turn the speaker off and then switch it on again. Make sure the speaker is specified as the sound output device (check settings in the playback device).

Instruction for appearance

CANYON BSP-7 Outdoor wireless speaker - Fig 3

The sound is reproduced with distortions| Move the speaker closer to the device. Check if the wireless signal sources that are capable of creating interference are not in close vicinity to the device.
Adjust the volume in the speaker and device. Turn the speaker off and then switch it on again.
---|---

If the actions from the above list do not contribute to problem-solving, please contact the support team at CANYON site http://canyon.eu/ask-your- question/

Pairing

CANYON BSP-7 Outdoor wireless speaker - Fig 4

SAFETY INSTRUCTIONS
Read carefully and follow all instructions before using this product.

Do not expose the device to excessive moisture, water or dust. Do not install in rooms with high humidity and dust level.
Do not expose the device to heat: do not place it close to heating appliances, and do not expose it to direct sun rays.
The product shall be connected to the power supply source of the type indicated in the operation manual only.
Never spray liquid cleaning detergents. Clean the device with a cloth only.

WARNINGS

Using speakers at a high volume level for a long time can lead to temporary or permanent hearing loss.
The device housing shall not be removed. Any attempt to perform an unauthorized device repair is not recommended and will void the warranty.

All other products names and trademarks are property of their respective owners
www.canyon.eu

WARRANTY

The warranty period starts from the day of the product purchase from CANYON authorized SELLER. The date of purchase is the date specified on your sales receipt or on the waybill. During the warranty period, repair, replacement, or refund for the purchase shall be performed at the discretion of CANYON. In order to obtain warranty service, the goods must be returned to the Seller at the place of purchase together with the proof of purchase (receipt or bill of lading). 2 years warranty from the date of purchase by the consumer. The service life is 2 years. Additional information about the use and warranty is available at http://canyon.eu/warranty-terms/ Date of manufacture: (see at the package). Made in China.
Manufacturer: Asbisc Enterprises PLC, 43, Kolonakiou Street, Diamond Court 4103 Agios Athanasios Limassol – Cyprus http://canyon.eu