CANYON Game Controller CND-GPW5 User Guide

: June 6, 2024
: CANYON

Table of Contents

CANYON Game Controller CND-GPW5
Product Button Indication
Device Overview
Device Connection
Technical Specifications
Troubleshooting
- Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CANYON Game Controller CND-GPW5

CANYON Game Controller CND GPW5

Product Button Indication

Driver
http://canyon.eu/drivers-and-manuals/

Device Overview

| Function on PS4
---|---
A| Command buttons
B| 8 D Direction pad
C/D| Left analog stick/Right analog stick
E| Home button (back to menu, wake up, switch off.)
F/G| Share ( share your gameplay online)/ Option (set option menu)
H/I| Turbo button/ Turbo LED indicator
J/K| R1/L1 buttons/triggers
L/M| R2/L2 buttons/triggers
N| Smart light bar (7 available colors)
P| Remapping/macro buttons M1-4 / default settings are command buttons
Q| Touch panel

Turbo Function

Hold the key to which you want to apply the turbo function while not releasing it, and then press the turbo button once.
To cancel this function, hold the key to which you applied the turbo function and do not release and then press the turbo key once.
If turbo function is active, Turbo LED will blink.

Programming M1-M4 buttons

M1-M4 are the remapping buttons and they can remap up to a maximum of 10 buttons. Their default settings are the same as for the command buttons.

Mode A Remapping

Press M(1-4) first and hold it without releasing and then press the button until the Turbo LED light is on. Gamepad is now in ‘setting’ status and you may release the former 2
Hold the button to which you want to set the function, L1, R3 etc., press M (1-4) again to confirm the setting and the Turbo LED light will then switch off to show the setting is successfully completed.
M (1-4) after setting will be stored in the memory. You can change the setting for each button by repeating the above steps. If you want to clear the memory and remove the setting then press M(1-4)+Share+M(1-4).

Mode B Macro

Press M(1-4) first and hold it without releasing and then press the
Press the buttons one by one to which you want to set the macro function, L1 + R1 +L2 etc., press M (1-4) again to confirm the setting and the Turbo LED light will then switch off to show the setting is successfully completed.
The sequence of actions depends on the order of the selected buttons. If you press M(1-4), then it will activate button L1 first, then R1, then L2, in sequence one by one in the order you originally
M (1-4) after setting will be stored in the memory. You can change the setting for each button by repeating the above steps. If you want to clear the memory and remove the setting then press M(1-4)+Option+M(1-4).

Device Connection

Insert USB dongle directly to the PS4 console/ PC USB port;
When channel LED stays on, connection is successful;
Press home button to enter;
Enjoy your game on your device.

Technical Specifications

Compatible with|

PS4,PC

---|---
Сonnection distance of wireless MAX|

up to 10m

Standby current less-than|

60uA

Motor|

Dual vibration

Battery capacity|

600mAh

Сharge voltage|

5V

Сharge current MAX|

600mA

Dimensions|

162mm106mm62mm

Weight|

214g±10g

Operating temperature|

-5° ~ 45°

Operation humidity|

25%-85%

Troubleshooting

The gamepad does not work

Check USB connection;
Try to plug gamepad into a different USB port;
Restart computer/console.
Gamepad works well when plugging into a full powered USB port. If you use USB HUB, it must have its own power supply.

The gamepad is detected disconnection when playing game