BOSS Marine Gauge Digital Media Player MGR250B User Manual
- June 6, 2024
- Boss
Table of Contents
Marine Gauge Digital Media Player MGR250B
Connecting MGR250B to your device
1. Press and Hold for three seconds unl power indicator lights Blue. 2. The
system will automacally go into pairing mode. The power indicator
will turn Blue and the Bluetooth indicator will blink Blue while waing for
Bluetooth connecon. Please be sure that Bluetooth is turned ON on your device,
select “Boss Audio MGR250B” on your device to connect the Bluetooth controller
(if the Bluetooth controller is connected the light will turn to solid Blue).
3. When the device is out of Bluetooth range, Bluetooth will be disconnected
automacally and automacally reconnect when detected in range again. (If not
please just repeat steps 1 and 2). 4. Input mode indicator — Blue light for
Bluetooth, Red light for AUX In, and Purple light for USB.
Seamless Flush Mount
1020
MGR250B
Features
Stream and Control your Favorite Music APPs
User’s Manual
What’s Included
Aer you have unpacked the marine gauge digital media player, check all the
contents of package so it contains all of the items below. If something is
misssing, please call our customer service department.
(1)MGR250B Marine Gauge Digital Media Player (1)3.5mm Stereo Cable
4 Channel Conformal Coated PCB
Power and Speaker Wiring
Line out-L Line out-R AUX Input
WHITE
WHITE/BLACK GRAY
Marine Gauge Digital USB Media Player
BLACK
DC12V(-) Grounded to metal chassis, or directly to negative polarity of
battery.
Fuse:15A YELLOW
DC12V(+) Recommended wiring with fuse (parts are not included)
GRAY/BLACK GREEN
GREEN/BLACK PURPLE
BLUE REMOTE
RED ACC
PURPLE/BLACK
Red Blue White
Gray
Green
ACC REMOTE
Short Press Previous Song
Press And Hold Volume Down
Play / Pause Press Hold = On/Off
Bluetooth/AUX/USB Switch Short Press Next Song
Press And Hold Volume Up
Disconnect Bluetooth
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>