ANZZI BA-LMDFXBT005WH Silver Stellar 36/38 inch Mirror Instruction Manual

: June 6, 2024
: ANZZI

Table of Contents

**
BA-LMDFXBT005WH 28″*36
INSTALLATION INSTRUCTIONS
INSTALLATION DIAGRAM
Documents / Resources

Item: BA-LMDFXBT005WH ANZZI LED MIRROR INSTALL & OPERATION MANUAL V1.0

ANZZI BA-LMDFXBT005WH Silver Stellar 36 38 inch Mirror

DON’T WAIT!
REGISTER NOW!
Register your product within 90 days to ensure your product is recognized as an ofﬁcial purchase and is eligible for warranty coverage.
Mail-in the completed registry card (Pg. 2) or register online at www.swcorp.com/register.

**

PRODUCT REGISTRATION∗**

IMPORTANT: YOUR WARRANTY WILL NOT BE RECOGNIZED UNLESS THIS CARD IS FULLY COMPLETED AND RETURNED OR ONLINE REGISTRATION IS COMPLETED.

To ensure that your warranty is registered and conﬁrmed please do one of the following:

Register online at www.swcorp.com/register. You will be asked to ﬁll out the same information you would in the registration card. Registering online is fast, secure and ensures we receive your information.
Complete, cut out, and mail the registration card below. By returning this registration card we conﬁrm the date of purchase for your new product. This conﬁrmation will allow us to process any warranty claims.

Mail the card to 5701 NW 35 Avenue, Miami, FL 33142

CUT ALONG
DOTTED LINE.

Product Registration Card

Name…………………………………………………………………………. Address ……………………………………………………………………………………………………………
City……………………………………….. State ……………………… Zip …………………………
Phone……………………………………. Email …………………………………………………………..
Date of Purchase ………………………
Installer’s Name…………………………………………………………… Phone ……………………………………………………………………..

I have read the Owner’s Manual carefully and understand and agree that any installation, operation, or maintenance of the product must be
done strictly in accordance with instructions and guidelines contained in the owner’s manual and installation guide.
Signature____Date

Have questions? Call us at 1-844-44-ANZZI or visit us at www.ANZZI.com

BA-LMDFXBT005WH 28″*36

ANZZI BA-LMDFXBT005WH Silver Stellar 36 38 inch Mirror - BA-
LMDFXBT005WH28 36

ANZZI BA-LMDFXBT005WH Silver Stellar 36 38 inch Mirror - BA-LMDFXBT005WH28
36 2

INSTALLATION INSTRUCTIONS

Apply to the below style of LED Backlit Mirror

ANZZI BA-LMDFXBT005WH Silver Stellar 36 38 inch Mirror

Please read carefully and save these instructions.
Don’t discard any of the packagings until you are sure that you have all of the parts and the fittings.
Make sure power to the junction box is off before commencing installation.

IMPORTANT

Unpack mirror. DO NOT lay the mirror on the tiled or concrete surface prior to installation. The mirror must be on a protected surface to prevent hipping of the corners.
Care must be taken before drilling pilot holes to avoid any existing wiring or pipework that may be concealed.
A certified electrician must perform all work. The mirror must be connected to a GFI.
The anti-fog mat operates only when the LED light is turned on by the touch sensor

INSTALLATION
Please refer to the installation diagram on the back of the page.

Unpack the LED mirror and prepare the tools needed. ( See Pic.1 )
Make sure the measurement on the cardboard screw holes are matching up with the aluminum base on the mirror back, then mark the screw holes according to the cardboard with a pencil. (See Pic.2)
Drill holes, and put in the plastic plugs, then fix the aluminum bar with screws and twisting the T shape nail to the wall. (See Pic.3&Pic.4);
Connect hardwires of mirror light and blue tooth speaker to power lines on the wall. Make sure the power is off. (See Pic.5);
Hanging the LED mirror with an aluminum bar and lock it with the anti-pull iron sheet by using the spanner provided at the fittings bag. (See Pic.5&Pic.6)

FUNCTION DESCRIPTION

Blue tooth speaker: Turn on the main power, the blue tooth speaker will be on standby; turn on the phone’s blue tooth to pair-AST9K07, then you can control the mirror blue tooth speaker and play music.
Touch sensor switch: Turn the light and anti-fog function by the dimmable sensor switch, see details as below: Button:
a) Touch the button for LED light and anti-fog control;
b) Long press button for dimming. It will change the LED brightness from 10%-100%.

MAINTENANCE
Wipe clean with a soft damp cloth. Apply glass cleaner to a cloth and do not apply directly to the mirror.
Never use abrasive cleaners as these could damage the finish or exposed LED strips.