ANZZI SP-AZ012 Monsoon 4 Jetted Full Body Shower Panel Installation Guide
- June 17, 2024
- ANZZI
Table of Contents
- ANZZI SP-AZ012 Monsoon 4 Jetted Full Body Shower Panel
- Product Information
- Product Usage Instructions
- PARTS LIST
- BEFORE YOU START
- SPEC DRAWING
- INSTALLATION (SETUP)
- INSTALLATION (HANDSHOWER)
- CARE AND MAINTENANCE
- LIMITED LIFETIME WARRANTY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANZZI SP-AZ012 Monsoon 4 Jetted Full Body Shower Panel
Product Information
Specifications:
- Model: SP-AZ012
- Material: Tempered Glass
- Finish: Wood Style Finish
- Handles: 2
- Jets: 4 fully directional
- Shower Size: 6.875 x 6.875 inches
- Reach: 60 inches
- Weight: 30 lbs
- Height: 57 1/2 inches
- Supply Connections: 2.5 gpm
- Features:
- Heavy RainTM Fixed Showerhead
- Acu-StreamTM high-pressure body jets
- Euro-GripTM hand-held sprayer
- Rhino AlloyTM-certified materials
Product Usage Instructions
Before You Start:
Recommended Items:
- Screwdriver
- Channel Locks
- Goggles
- Adjustable Wrench
- Teflon tape
- Allen key
ATTENTION: Please read all instructions thoroughly including all warnings, attentions, and notes before beginning installation.
For any questions or concerns, contact our dedicated technical support team at 1-844-44-ANZZI.
Installation (Setup):
Step A:
Before drilling any holes for the shower panel brackets, ensure there are
no hidden cables or pipelines aligned with the desired drilling position.
- Drill the two holes for the top bracket 1 inch apart at the desired height.
- Drill the two holes for the bottom bracket 1 inch apart at approximately 45 degrees below the top bracket.
Step B:
Figure B
Insert the wall anchors into the pre-drilled holes as shown in Figure B.
Step C:
Figure C
Place the shower panel brackets aligned with the drilled holes and using a
Philips screwdriver, tighten the screws to secure the brackets.
FAQ (Frequently Asked Questions):
Q: What is the weight of the MONSOON shower panel?
A: The weight of the MONSOON shower panel is 30 lbs.
Q: What is the reach of the shower?
A: The reach of the shower is 60 inches.
Q: What is the flow rate of the shower panel?
A: The flow rate of the shower panel is 2.5 gpm.
Q: Does the shower panel come with a hand held sprayer?
A: Yes, the shower panel comes with a Euro-GripTM hand held sprayer.
YOUR REVIEWS MATTER!
The ANZZI™ Family thanks you for your purchase and hopes you enjoy your very own ANZZI product for years to come! In the meantime let us know about your experience? We would love to hear your thoughts from the packaging to the quality and function of the product.
Leave a review on www.ANZZI.com/reviews and
let everyone know how satisfied you are with ANZZI!
Also, we humbly request submitting as many pictures as possible along with
your review. Millions of shoppers will want to know about your experience with
our products. Don’t just tell but show, too!
PARTS LIST
- Shower Head
- Body Jets
- Diverter
- Mixer
- Hand Shower
| Component no. | Component | Material |
|---|---|---|
| 1 | head shower | s/s |
| 2 | arm bar | brass |
| 3 | flange | brass |
| 4 | front body | glass |
| 5 | backside body | s/s |
| 6 | washer 1 | rubber |
| 7 | arm bar nut | brass |
| 8 | clip | s/s |
| 9 | one way joint | ABS |
| 10 | body jets | brass |
| 11 | knob | zinc |
| 12 | knob plate cover | zinc |
| 13 | cartridge | ABS |
| 14 | handle | zinc |
| 15 | handle plate cover | zinc |
| 16 | valve cap | ABS |
| 17 | thermostatic cartridge | ABS |
| 18 | two way joint | ABS |
| 19 | thermostatic mixer | brass |
| 20 | hand shower | ABS |
| 21 | hand shower holder | ABS |
| 22 | pvc hose | PVC |
| 23 | braided hose | s/s |
| 24 | flexible hose | s/s |
BEFORE YOU START
Recommended Items
ATTENTION: Please read all instructions thoroughly including all
warnings, attentions and notes before beginning installation.
For any questions or concerns contact our dedicated technical support team at
1-844-44-ANZZI.
SPEC DRAWING
MON SOON
SP-AZ012
- Material: Tempered Glass
- Finish: Wood Style Finish
- Handles: 2
- Jets: 4 fully directional
- Shower: 6.875” x 6.875“
- Sprayer: 60” reach
- Weight: 30 lbs
- Height: 57”
- Supply: 1/2” connections
- Flow: 2.5 gpm
Features
- Heavy Rain™ Fixed Showerhead
- Acu-Stream™ high pressure body jets
- Euro-Grip™ hand held sprayer
- Rhino Alloy™ certified materials
INSTALLATION (SETUP)
IMPORTANT
Before drilling any holes for the shower panel brackets, ensure there are no hidden cables or pipelines aligned with the desired drilling position.
Step A
Drill the two holes for the top bracket 1” apart at the desired height.
Step A.2
Drill the two holes for the bottom bracket 1” apart at approximately 45” below
the top bracket.
Step B
Insert the wall anchors into the pre-drilled holes as shown in Figure B.
Step C
Place the shower panel brackets aligned with the drilled holes and using a
Philips screw-driver ighten the screws to secure the brackets.
INSTALLATION (HANDSHOWER)
Step 1A
Insert the shower wand holder through the pre-drilled hole on the shower
panel.
Step 1B
Install the water supply hose for the shower wand onto the holder, as shown.
Step 1C
Make sure all O-rings are inserted to prevent leakage.
Step 1D
Once the shower panel is fully installed and hung on the bracket, you can
install the shower wand hose to the holder connection.
Step 2A
Finally, install the shower wand to the hose, as shown.
Step 3A
Install the shower arm to the shower panel, using the rubber washer and nut on
the opposite side to tighten.
Step 3B
Makes sure the shower arm is sitting correctly before installed the shower
head.
Step 3C
Screw the shower head onto the shower arm.
Step 4A
Screw the cold and hot water hoese from the shower panel to the supply lines
in the wall.
Step 4B
Carefully hang the shower panel on the secured mounting brackets as shown in
Figure 4.
CARE AND MAINTENANCE
ANZZI™ products are crafted with superior quality standards and workmanship
and are engineered to stand the test of time. However, that does not mean the
product can be neglected and will need some care and cleaning.
It is recommended to use regular soap and hot water along with a non-abrasive
cloth or sponge to regularly clean the product. This avoids any nasty build up
or deposits which would be tougher to remove.
If you feel the use of stronger cleaning solutions or chemicals is necessary
always test the cleaning solution or chemical on an inconspicuous area before
applying to the entire surface.
Wipe all surfaces clean and rinse completely with water immediately after
applying cleaner. Rinse and dry any overspray that lands on nearby surfaces.
DO NOT ALLOW THE CLEANER TO SOAK.
Following these simple principles will ensure you ANZZI™ product will remain
as lustrous and stun-ning as the day it was first received. ENJOY!
Sincerely,La Familia ANZZI™
For more information visit us at www.ANZZI.com
LIMITED LIFETIME WARRANTY
ANZZI™ products are manufactured with superior quality standards and
workmanship and are backed by our limited lifetime warranty. ANZZI™ products
are warranted to the original consumer purchaser to be free of defects in
materials or workmanship. We will replace FREE OF CHARGE* any product or parts
that proves defective. Simply call 1-844-44-ANZZI
(1-844-442-6994) to submit a warranty
claim and request an RMA. Proof of purchase (original sales receipt) from the
original con-sumer purchaser must be made available for all ANZZI™ warranty
claims.
This warranty excludes incidental/inconsequential damages and failures due to
misuse, abuse or normal wear and tear. This warranty excludes all industrial,
commercial & business usage, whose purchasers are hereby, extended a five year
limited warranty from the date of purchase, with all other terms of this
warranty applying except the duration of warranty.
Some states and provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitations may not apply to
you. This warranty gives you specific legal rights and you may also have other
rights that vary from state to state and province to province. Please con-tact
1-844-44-ANZZI (1-844-442-6994) or
visit www.ANZZI.com/Warranty for more
details.
Sincerely,
La Familia ANZZI™
Shipping and handling fees are not covered under the ANZZI™ Warranty.
This warranty is in effect as of January, 2016. This warranty supersedes all
previous warranties and/or claims both stated and implied. This warranty is
subject to change without notice.
PRODUCT AND WARRANTY REGISTRATION
To register your product and activate your Limited Lifetime Warranty contact
us at 1-844-44-ANZZI or email us at
support@anzzi.com. Or, if preferable, fill out the
form below then scan/fax/mail us a copy.
Email: support@ANZZI.com
Fax: 1-866-560-1060
Mail: ANZZI™
5701 NW 35th Ave.
Miami, FL 33142
In need of replacement parts?
Visit www.SpaWorldParts.com
Name…………………………………………………………………………
Address …………………………………………………………………………………………………………….
City ……………………………………….. State ……………………… Zip …………………………
Phone …………………………………………………………………………..
Email…………………………………………………………………………..
Date of Purchase……………………… Dealer …………………….
Address …………………………………………………………………………………………………………….
Installed by …………………………………………………………………..
Address ……………………………………………………………………………………………………………. State ……………
Phone ………………………………………………………………………… State……………………… Zip……………………..
Email…………………………………………………………………………..
I have read the ANZZI™ Owner’s Manual carefully and understand and agree that any installation, operation or maintenance of the product must be done strictly in accordance with instructions and guidelines contained in the ANZZI™ owner’s manual and installation guide.
For more information please call 1-844-44-ANZZI or email us at support@ANZZI.com
References
- Bathroom, Kitchen & Shower Collections in USA | ANZZI™
- Bathroom, Kitchen & Shower Collections in USA | ANZZI™
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>