FIIL CC2 True Wireless Earbuds User Guide

FIIL CC2 True Wireless Earbuds User Guide

Important Safety Instructions

Please read the following safety instructions carefully before using this product Please make sure to include these safety instructions with the product when delivered to a third party.
Health and safety

• Do not use the product in case it is apparently damaged;
• Do not use the product at a high volume level for an extended period of time;
• Do not use the product while driving or being engaged in activities that require full concentration;
• Keep the product, its packaging and aocessories out of the reach of children and pets to avoid choking hazard;
• Keep the product away from medical devices that may be affected by magnetic field, such as an implanted cardiac pacemaker.

Product care

• Keep this product dry and at room temperature, avoid long time exposure to high temperature or humidity environments;
• Use accessories only provided by fiil;
• Excessive signal level may cause damaging overload;
• Clean the product only with dry and soft cloth.

Battery warning!

The product uses lithium polymer battery. Improper usage may lead to the risk offire or burn. Please use the charger only supplied by qualified manufacturer (recommended output: voltage SV, current ~S00mA) or charge the product via PC USB port.

Specification and disclaimer

• The product is designed for portable devices and high-fidelity systems;
• Any usage other than those specified in the user manual is deemed as misuse;
• Please note that FIil will accept no responsibility for any loss incurred by misuse.
• FIil CC2 is designed &made by Jiangxi FeierTechnology Co., Ltd.
• ‘FIil’ is a registered trademark® of Jiangxi FeierTechnology Co., Ltd.

fiil+ APP download and usage

FIil CC2 supports fiil+ APP to config earbud settings, register products.

Scan above QR code to visit and download fiil+ APP

Packaging Content

EarbudsX2 (L/R)                  Charging Case Xl

Type C Charging Cable XI        User Manual Xl

Main User Interfaces

• Earbud
  
  1LED indicator
  2 ENC microphone
  3Tou ch control
  4 Call microphone

• Charging Case.
  
  5 Charge indicator
  6 Right earbud
  6 Left ea rbud
  7 Type-C connector

Get Started

Please follow below steps to activate and start to use.

• STEPl
  If charging case’s LED does not light on after opening the charging case at first, please
  connect USB cable to charge for more than l Omin.

• STEP2
  Take earbuds out of charging case,the blue light flashes. Both earbuds will get sync and enter pairing mode automatically
  without any manual operation.

Bluetooth Pairing

• Bluetooth Pairing
  For first usage of brand new FIILCC2, please refer to pages “Get Started”, the earbud status indicator will continue to blink blue once entered pairing mode.
  For a paired FIil CC2, please delete its pairing history in the device list or when the earbuds are turned off, press and hold any one of earbuds until the LED ind icator bl inks blue.

• Search Connection
  Enter setup menu of audio sou rce devices, select “search device” in “Bluetooth” then select “FIil CC2” in the device list to connect.
  

How to Control

How to charge

• Charge Earbud
• When earbud reminds “recharge headset” or the LED indicator blinks white, that means battery is low and earbud should be charged.
• Place the earbuds into charging case and close, then earbud will be charged.

•Notes:

1. Earbud will power off and the Bluetooth will be disconnected during charging.
2. If charging case LED bl inks after earbuds inserted, please connect USB cable to charge.

• Earbuds LED Indicator
• When the LED indicator is on, it means that the earbuds are being charged.
• When the LED indicator is off, it means that the earbuds is fu lly charged.

How to charge

• Recharge Charging Case
  • When charging case is unable to charge ea rbud or its LED indicator blinks White, it means battery low and charging case should be recharged .
  e Please connect Type-C cable with USB adapter to recharge charging case.

• **Charging Case Indicator

• When both red LED indicators are light on, it means that the charging case is being charged.
• When LED indicator is light off, it means that the charging case and earbuds are fully charged.
**

Product Parameters

Warranty and Services

FIil guaranteed: One Year Warranty for quality issues

Scan the QR code above with mobile phone to download !iii+ APP(FAQ inside). Enter information to register device. Contact the customer service for any quality issue via fiil+/Facebook/Twitter service account ( ‘Fiil Headphone’) /email customer@fiil.com.

Trouble Shooting

FCC and IC COMPLIANCE STATEMENT
~ This device complies with Part 15 of the FCC Rules andIndustry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules / with Canadian ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmfu l interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equ ipment does cause harmful
   interference to radio or television reception which can be determined by turning the rad io or television off and on, the user is encouraged to try to correct interference by one or more of the following measures:

l

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on another circu it.
4. Consult the dealer or an experienced rad io/TV technician for help.

CAUTION STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

Correct disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European – countries with separate collection systems)
This marking shown on the product or its literature indicates that it shou ld not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate th is from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

CAUTION

Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

To prevent possible hearing damage, do not listen at high volume levels for long periods.

CE Mark Warning RF Exposure Information The device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
Note: The maximum average emitted power of the device is less than 20mW.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>