D-Link DAP-X1860 AX1800 Mesh Wi-Fi 6 Range Extender Installation Guide
- June 6, 2024
- D-Link
Table of Contents
Quick Installation Guide
DAP-X1860
AX1800 Mesh Wi-Fi 6 Range Extender
PACKAGE
CONTENTS
- DAP-X1860 || AX1800 Mesh Wi-Fi 6 Range Extender
- Quick Installation Guide
- Quick Installation Card
INSTALLATION
OPTION 1 QUICK WPS SETUP
You easily can pair your device with any router to extend your wireless network.
- Plug the DAP-X1860 into a power source near your wireless router. Wait until the LED starts blinking orange.
- Press the WPS button on your router for 3 seconds. Refer to your router’s manual for router behaviour.
- Press the WPS button on your DAP-X1860 for 2-3 seconds. The status LED should start to blink green.
- When the Status LED turns solid green (may take up to 5 minutes), this indicates that your DAP-X1860 is securely connected to your wireless router.
Your setup is complete! You can now unplug and move your device to a location between your router and the area where you want wireless coverage. By default, your device will share the same Wi-Fi name and password as your router.
IMPORTANT
WPS may be disabled on some Routers or Modems. If the WPS Status LED on your Router or Modem does not start blinking when you have pressed the WPS button, try again and hold it a little longer. If it still does not blink, STOP, and configure your DAP-X1860 using Option 2: D-Link Wi-Fi App Setup.
OPTION 2 D-LINK WI-FI APP SETUP
1 / Download the D-Link Wi-Fi app and launch it.
2 / Tap Install New Device. Scan the QR code on the Quick Installation Card. Follow the on-screen instructions to complete the setup.
FREQUENTLY ASKED
QUESTIONS
Why can’t I connect to my wireless router or my wireless connection
drops?
Verify that your extender is within range of your wireless router. Try
plugging it into a location closer to the router and verify that the Status
LED is solid green. Note that when extending a wireless signal from a router
or access point, devices connected to the extender will not get the same
speed/throughput as when connected directly to the router.
How do I access the web-based configuration utility?
To access the web-based configuration utility, connect to the device’s network
using an Ethernet cable or by using its Wi-Fi Name/SSID and password, then
type the device specific URL into a browser. The device specific URL is
written in the format of [**http://dlinkap
Why can’t I access the Internet?
Verify that your extender is working by rebooting the extender. If you still
can not connect to the Internet, contact your Internet service provider.
What do I do if I forgot my device password / my wireless network
password?
If you forgot your password, you must reset your extender. This process will
change all your settings back to the factory defaults.
How do I restore the extender to its factory default settings?
Locate the reset button. With the extender powered on, use a paper clip to
hold the button down for a second. Release the button and the extender will go
through its reboot process.
GPL
CODE STATEMENT
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to view the full GPL Code Statement at:
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Written Offer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
Please direct all inquiries to:
Snail Mail: Email:
Attn: GPLSOURCE REQUEST GPLCODE@dlink.com
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
TECHNICAL SUPPORT
Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. Customers can contact D-Link Technical Support through our website by choosing the relevant region.
Contact Us
www.dlink.com/en/contact-us
2020/07/16 Ver.1.00(DI) 5300-00007803-50U
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>