ASUS AX-1800 Wireless Dual Band WiFi 6 Router User Guide
- June 6, 2024
- Asus
Table of Contents
ASUS AX-1800 Wireless Dual Band WiFi 6 Router User Guide
Package contents
- RT-AX55 / RT-AX1800 Plus / RTAX56U V2 Wireless Router
- Network cable (RJ-45)
- AC adapter
- Quick Start Guide
A quick look at RT-AX55 / RT-AX1800 Plus / RT-AX56U V2
- 5GHz LED
- 2.4GHz LED
- LAN 1~4 LEDs
- WAN (Internet) LED
- Power LED
- Reset button
- WPS button
- Power switch
- Power (DCIN) port
- WAN (Internet) port
- LAN 1 ~ 4 ports
Positioning your wireless router
For optimal wireless transmission between the wireless router and connected wireless devices, ensure that you:
- Place the wireless router in a centralized area for a maximum wireless coverage for the network devices.
- Keep the wireless router away from metal obstructions and away from direct sunlight.
- Keep the wireless router away from 802.11g or 20MHz only Wi-Fi devices, 2.4GHz computer peripherals, Bluetooth devices, cordless phones, transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal interference or loss.
- Always update to the latest firmware. Visit the ASUS website at http://www.asus.com to get the latest firmware updates.
- To ensure the best wireless signal, orient the four non-detachable antennas as shown in the drawing below.
NOTES:
- Use only the adapter that came with your package. Using other adapters may damage the device.
- Specifications:
Preparing your modem
- Unplug the power cable/DSL modem. If it has a battery backup, remove the battery.
NOTE: If you are using DSL for Internet, you will need your username/password from your Internet Service Provider (ISP) to properly configure the router.
-
Connect your modem to the router with the bundled network cable.
-
Power on your cable/DSL modem.
-
Check your cable/DSL modem LED lights to ensure the connection is active.
Setting up your RT-AX55 / RT-AX1800 Plus / RT-AX56U V2
You can set up your router via wired or wireless connection.
A. Wired connection
-
Plug your router into a power outlet and power it on. Connect the network cable from your computer to a LAN port on your router.
-
The web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
-
Set up a password for your router to prevent unauthorized access.
B. Wireless connection
- Plug your router into a power outlet and power it on.
- Connect to the network with SSID shown on the product label on the back side of the router. For better network security, change to a unique SSID and assign a password.
Wi-Fi Name (SSID): ASUS_XX
-
XX refers to the last two digits of the MAC address. You can find it on the label on the back of your router.
- You can choose either the web GUI or ASUS Router app to set up your router.
a. Web GUI Setup
- Once connected, the web GUI launches automatically when you open a web browser. If it does not auto-launch, enter http://router.asus.com.
- Set up a password for your router to prevent unauthorized access.
b. App Setup
Download ASUS Router App to set up your router via your mobile devices.
- Turn on Wi-Fi on your mobile devices and connect to your router’s network.
- Follow ASUS Router App setup instructions to complete the setup.
https://play.google.com/store/apps/details?id=com.asus.aihome&hl=zh_TW
https://itunes.apple.com/tw/app /asus-router-manage-secure-boost-wifi-network/id1033794044?mt=8
Remembering your wireless router settings
- Remember your wireless settings as you complete the router setup.
FAQ
- Where can I find more information about the wireless router?
- Technical support site: https://www.asus.com/support
- You can get the user manual online at https://www.asus.com/support
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions
for you to be able to responsibly recycle our products, batteries, other
components, as well as the packaging materials. Please go to
http://csr.asus.com/english/Takeback.htm for the detailed recycling
information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://csr.asus.com/english/REACH.htm.
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure
compliance. To maintain compliance with FCC exposure compliance requirement,
please follow operation instruction as documented in this manual.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
KC: Korea Warning Statement
Class B equipment (For Home Use Broadcasting & Communication Equipment)
This equipment is home use (Class B) electromagnetic wave suitability and to
be used mainly at home and it can be used in all areas.
India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and
prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls(PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations
exceeding 0.1 % by weight in homogenous materials and 0.01 % by weight in
homogenous materials for cadmium, except for the exemptions listed in Schedule
II of the Rule.
Networks Global Hotline Information
![ASUS AX-1800 Wireless Dual Band WiFi 6 Router User Guide
- Networks Global Hotline Information](https://manuals.plus/wp- content/uploads/2021/10/ASUS-AX-1800-Wireless-Dual-Band-WiFi-6-Router-User- Guide-Networks-Global-Hotline-Information-2.jpg)
NOTES:
- UK support e-mail: network_support_uk@asus.com
- For more information, visit the ASUS support site at:https://www.asus.com/support/
CE statement
Simplified EU Declaration of Conformity Auster Computer Inc. hereby declares
that this device is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. Full text of EU declaration of
conformity is available at https://www.asus.com/Networking/RT-
AX55/HelpDesk_Declaration/. Declaration of Conformity for Eco-design
directive 2009/125/EC Testing for eco-design requirements according to (EC) No
1275/2008 and (EU) No 801/2013 has been conducted. When the device is in
Networked Standby Mode, its I/O and network interface are in sleep mode and
may not work properly. To wake up the device, press the WPS button. This
equipment complies with EU radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 31 cm
between the radiator & your body. All operational modes: 2.4GHz: 802.11b,
802.11g, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40),
802.11ax (HE20), 802.11ax(HE40) 5GHz: 802.11a, 802.11n (HT20), 802.11n (HT40),
802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80), 802.11ax (HE20),
802.11ax(HE40), 802.11ax (HE80) The frequency, mode and the maximum
transmitted power in EU are listed below: 2412-2472MHz: 19.79dBm 5180-5240MHz
VHT20 MCS0: 22.9dBm 5260-5320MHz VHT40 MCS0: 22.8dBm 5500-5700MHz VHT80 MCS0:
29.9dBm The device is restricted to indoor use only when operating in the 5150
to 5350 MHz frequency range. The adapter shall be installed near the equipment
and shall be easily accessible.
Safety Notices
- Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
- Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
- DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
- DO NOT place or drop objects on top and do not shove any foreign objects into the product.
- DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
- DO NOT cover the vents on the product to prevent the system from getting overheated.
- DO NOT use damaged power cords, accessories, or other peripherals.
- If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
- To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
- DO NOT mount this equipment higher than 2 meters.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>