HANNL-MAX CD Micro with FM Radio HX- 1082BT Instruction Manual

: June 6, 2024
: HANNL-MAX

Table of Contents

INSTRUCTION MANUAL
SPECIFICATIONS
RADIO OPERATION
BLUETOOTH OPERATION
CD OPERATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CD MICRO WITH FM RADIO, BLUETOOTH AND DUAL USB PORTS FOR CHARGING (2.4A and 1A)

Model : HX- 1082BT
(Bluetooth pairing code: HX-1082BT HANNLOMAX)

INSTRUCTION MANUAL

Note : Please read and follow these instructions before using your unit.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Grounding or Polarization This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Alternate Warnings This product is equipped with a three-wire ground-type plug, a plug having a third (grounding) pin. This plug will only be into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
Ventilation Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or another similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
: CLASS II apparatus with double insulation and no protective earth provided.
Caution Marking and rating plate was located at the bottom enclosure of the apparatus.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
The mains plug is used as a disconnect device. The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use. To completely disconnect the power input, the main plug or apparatus shall be disconnected from the mains.
Battery shall not be exposed to excessive heat such as sunshine, fire, or the like
Excessive sound pressure from earphones and headphones can cause hearing loss.

FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. Consult the dealer or an experienced radio/TV technician for help.

The lightning flash with arrowhead symbol, with an an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

| CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

|

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

---|---|---
LASER SAFETY

This unit uses a laser. Only a qualified service person should remove the cover or attempt to service this device to avoid possible eye injure. Caution: USE OF CONTROLS OR ADJUSTMENT OF PERFORMANCE OF PROCEDURE OTHER THAN SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

|

INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO LASER BEAM.

LOCATION OF CONTROLS

HANNL-MAX CD Micro with FM Radio HX-LOCATION OF
CONTROLS

1.	POWER/OFF/FUNC. button	11.	USB Charging Port (2.4A)
2.	TIME/P-MODE/PRO./MEM/+10 button	12.	USB Port for MP3 playback and

SPECIFICATIONS

Frequency Range: FM 88 – 108 MHz
Power Supply: AC 120V ~ 60 Hz
USB Rated Output: DC5V 1A DC 5V 2.4A
Specifications are subject to change without further notice.

CONNECTING THE LOUDSPEAKERS
Connect the cables of the two loudspeakers to the corresponding input (R) for the right speaker and input (L) for the left speaker, located at the back of the unit.

ATTENTION:

Connect the loudspeakers before powering the unit:
The unit may not work properly or get damaged if you use speakers different than the ones supplied with the unit.

AC OPERATION
Connect the AC Power cord to a standard AC outlet.

ATTENTION

Do not plug or unplug the power cable while you have wet hands;
When planning not to use this unit for a long time, disconnect the power cable from the wall outlet;
When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid shock risks caused by damaged cable.

SETTING THE CLOCK

Press TIME/P-MODE/PRO./MEM/10+ button to set the time. The HOUR digit will begin to flash on the display.
Press the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button to adjust the HOUR. Press TIME/P-MODE/PRO./MEM/10+ button to confirm HOUR.
The MINUTE digit will begin to flash on the display. Press TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button to adjust the MINUTE. Press TIME/P-MODE/PRO./MEM/10+ button to confirm MINUTE.

USB CHARGE YOUR DEVICES (2.4A and 1A)
Connect the standard size end of a USB cable (not included) to the USB ports on the unit and connect the other end to the charging port of your devices.

The unit contains two USB ports (2.4A and 1A).

Remarks : Some devices may not support USB charging or may require a higher power rating than this product provides. Observe the charging status on your device. Ensure your device is working properly before attempting to charge. The charging function may not be supported for all phones or electronic devices

RADIO OPERATION

Press POWER/OFF/FUNC. button to select the FM Radio.
MANUAL TUNNING : Press the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button step by step to tune to the desired radio stations.
DIGITAL TUNNING : Press and hold the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button to search the next radio station in the direction of the search. The search operation finds stations with strong signals, Stations with weak signals can only tune manually.
Use the VOL+ or VOL- knob to adjust the volume to the desired listening level.
To turn off the radio, press and hold POWER/OFF/FUNC. button to go to Clock mode.

Note : For better FM reception, please fully extend the FM antenna located at the back of the unit and rotate to obtain the best possible station reception.

SAVING RADIO STATIONS IN THE MEMORY
Note : If you use this unit in the first time, or after plugging off the power cord from a wall outlet, the unit memory number will be starting from “P01”.

Tune to the desired FM radio station.
Press the TIME/P-MODE/PRO./MEM/10+ button, the display will show the memory station
number and “ P01 ‘’ flash continuously.
Press TIME/P-MODE/PRO./MEM/10+ button again to store the station in the memory.
Repeat steps 2 to 3 to store more radio stations in the memory.
Up to 10 FM radio stations can be stored in the memory.

TO LISTEN TO A STORED RADIO STATION IN THE MEMORY
Press the STOP/M+ button to skip to the next stored radio station.

BLUETOOTH OPERATION

Connecting BLUETOOTH

Press POWER/OFF/FUNC. button to select the BLUETOOTH mode,‘ bt ‘ will show in the display.
Turn on the Bluetooth of your device and search the unit for connection. Your Bluetooth
device should find “ HX-1082BT HANNLOMAX ”. If a password is needed for connection, please enter “0000”.
If connection is successful, your Bluetooth device may show Bluetooth is connected.
Select and play the audio files through your Bluetooth device.
You can use the TIME+/SKIP+/TU+ button to go to the next track or press the
TIME- /SKIP-/TU- button to go back to the previous track.
Press the PLAY/PAUSE/PAIR button to pause playing. T o resume, press the PLAY/PAUSE/PAIR button again.

To Unpair the Bluetooth connection
Press and hold the PLAY/PAUSE/PAIR button to unpair the Bluetooth connection. The CD Microsystem will search for a new pairing.

Turn Off the Bluetooth Operation
To turn off the Bluetooth, press and hold POWER/OFF/FUNC. button to go to Clock mode.

CD OPERATION

Press POWER/OFF/FUNC. Button to select the CD mode
Insert an audio CD disc (CD/CDR /CDRW) in the CD compartment and close the CD door, the unit will start reading the disc and play automatically.
During play, press the PLAY/PAUSE/PAIR button to temporarily pause playing. To resume, press the PLAY/PAUSE/PAIR button again.
To stop playing the disc, simply press the STOP/M+ button
To turn off the CD mode, press and hold POWER/OFF/FUNC. button to go to Clock mode.

CD Programming
The CD programming can only be done in STOP/M+ mode

Press the TIME/P-MODE/PRO./MEM/+10 button, the LCD display will show “ P01 ”.
Use the TIME+/SKIP+/TU+ button or TIME- /SKIP-/TU- button to select the desired track.
Press the TIME/P-MODE/PRO./MEM/+10 button again to store the selected track in the
memory, the LCD display will show “ P02 ”.
Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the memory.
Press the PLAY/PAUSE button to start playing the disc in the programmed order.
To stop playing, press the STOP/M+ button.
To cancel the programming list, press the STOP/M+ button again or open the CD door.

PLAYING MP3 FILES WITH USB DEVICE

Press POWER/OFF/FUNC. Button to select the USB mode.
Plug your USB device into the correct USB port on the unit, it will start reading the files in the USB device and will play the tracks automatically.
To pause playing the MP3 files, press the PLAY/PAUSE/PAIR button. To resume playing
the MP3 files press the PLAY/PAUSE/PAIR button again.
Use the VOL+ or VOL- knob to adjust the volume to the desired listening level.
Press and hold TIME/P-MODE/PRO./MEM/+10 button to skip 10 tracks.
To stop playing the MP3 files press the STOP/M+ button.
To turn off the USB mode, press and hold POWER/OFF/FUNC. button to go to Clock mode.

Skip Mode

In CD/USB/BLUETOOTH mode, press the TIME+/SKIP+/TU+ button to go to the next track.
In CD/USB/BLUETOOTH mode, press the TIME- /SKIP-/TU- button to go back to the beginning of the track.
In CD/USB/BLUETOOTH mode, press the TIME- /SKIP-/TU- button twice to go back to the previous track.

Different Play Mode ( Repeat 1 / Repeat all / Random)
In CD/USB mode, press the TIME/P-MODE/PRO./MEM/+10 button repeatedly to select different kinds of play mode with the following sequence.

Repeat 1 Repeat ALL Random Normal

– Repeat 1 ( will flash on the display) – repeat the track being played.
– Repeat ALL ( will stay light on the display)– repeat all the tracks in the entire disc.
– Random ( will flash rapidly on the display)– play the tracks in a random sequence.
– Normal ( will disappear)– play the tracks in sequence.

AUX-IN CONNECTION
1. At any mode ( RADIO / Bluetooth / CD / USB ), you can insert one side of the audio cable (not included) into the Line-Out or Phone Jack on your MP3 Player or audio device and the other side into the AUX-IN jack of the unit.
2. Turn on your MP3 player or audio device and follow its playback instructions.
3. Use the VOL+ or VOL- knob to adjust the volume to the desired listening level.
4. To turn off the Aux-in connection, turn off your MP3 player or remove the aux-in cable.

REMOTE CONTROL OPERATION
Reminder : Take off the plastic sheet located at the battery compartment tray to activate the remote control. Point the remote control at the remote sensor. The functions of the buttons on the remote control are the same as the corresponding controls on the main unit.

POWER use this button to turn the unit ON/OFF.
MUTE use this button to turn off the sound.
FUNC. use this button to select the function
TUNE+/SKIP+ in CD/USB/BLUETOOTH mode, use this button to skip to the next track. In FM radio mode, use this button to search the next available station in the forwarding direction.
(STOP) in CD/USB/BLUETOOTH mode, use this button to stop playing.
VOL− use this button to decrease the volume.
(PLAY/PAUSE) in CD/USB/BLUETOOTH mode, use this button to start or pause playing.
VOL+ use this button to increase the volume.
REPEAT in CD/USB mode, use this button to select the REPEAT function.
TUNE−/SKIP− in CD/USB/BLUETOOTH mode, use this button to skip back to the previous track. In FM mode, use this button to search the next available station in a backward direction.
RANDOM in CD/USB mode, use this button to select the RANDOM function.
M− In FM radio mode, use this button to skip to the next stored radio station in backward order.
MEM in FM radio mode, use this button to store the select radio station in the memory.
M+ In FM radio mode, use this button to skip to the next stored radio station in forwarding order.
PROG. / +10 in CD mode, use this button to program the playback order. In USB mode, use this button to skip 10 tracks.
TIME / MONO in CLOCK mode, use this button to set the clock. In radio mode, use this
button to select the Mono or Stereo mode.
BT PAIR Press this button to disconnect the Bluetooth pairing and go into pairing mode.