LEZYNE GPS + SMART CONNECT User Guide
- June 6, 2024
- Lezyne
Table of Contents
LEZYNE GPS + SMART CONNECT User Guide
Follow these instructions to pair a Lezyne Smart Connect LED to a compatible Lezyne GPS computer.
INSTRUCTION
STEP 1
Select “Smart Connect” from the Main Menu.
STEP 2
Choose Combo, Front or Rear
(Note: If the Front and Rear are linked, they will only show up under
“Combo”). To link a combo, use the Lezyne LED Ally app
STEP 3
Let the GPS scan.
(Note: If the light(s) are currently paired with another GPS Device or
the LED Ally phone app, they will not show up. Disconnect or move away from
signal range first.)
STEP 4
Select the light you want to pair with.
STEP 5
Your light(s) are now paired. To connect a different light, go back to this
page and click the “Press to Disconnect” option first and start the pairing
process over again.
NOTE
When turning your GPS device back on you will be asked to reconnect to your
lights. This is necessary so the device does not unknowingly power on your
Smart Connect lights.
Once connected, a Smart Connect page will now be available in the GPS’s main page carousel.
Note: In some cases only 4 sensors can be connected to a Lezyne GPS device at once. If you have too many sensors connected, please switch one to Ant+ or disconnect another sensor to use Smart Connect.
Example A: Connected Combo
Example B: Connected Front or Rear
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>