CURT 40249 Rocker Ball Cushion Hitch Trailer Ball User Manual
- June 6, 2024
- Curt
Table of Contents
CURT 40249 Rocker Ball Cushion Hitch Trailer Ball
INSTALLATION MANUAL
Level of Difficulty Easy
Easy
Weight Capacity
| Gross trailer weight (GTW) | 12,000 lbs. |
|---|---|
| Tongue weight (TW) | 1,200 lbs. |
Parts List
Item
|
Qty
| Description
---|---|---
1
|
1
| Trailer ball assembly
2
|
1
| Anti-rotation base plate
3
|
1
| Lock washer, 1-1/4″
4
|
1
| Hex nut, 1-1/4″
Ball mount sold separately
Tools Required
| Torque wrench | Socket |
|---|
Torque Specifications
| 1-1/4″ bolt | 450 ft-lbs. |
|---|
Use above torque setting unless otherwise
Product Registration
CURT Group stands behind our products with industry-leading warranties. Provide feedback and help us to improve our products by registering your purchase at: warranty.curtgroup.com/surveys
NOTICE
- Before you begin installation, read all instructions thoroughly.
- Proper tools will improve the quality of installation and reduce the time required.
- Ensure the trailer ball shank diameter corresponds with the ball mount hole size.
- Ensure the trailer ball size matches the trailer coupler. If they do not, the trailer could become uncoupled.
- To help prevent damage to the product or vehicle, refer to the specified torque specifications when securing hardware during the installation process.
WARNING
-
Never exceed the vehicle manufacturer’s recommended towing capacity. The ratings of the trailer ball are intended to represent the capability of the product and in no way reflect the ratings or capacity of the towing system it is being used with. The consumer or operator are strongly advised to know the ratings of the various components of the towing system and never exceed the limits of the lowest rated component being used.
-
Use of any pin other than what is provided by the manufacturer could be a serious safety hazard and will void the warranty.
-
Ensure that the safety chains operate freely around the trailer ball system and do not become entangled in the trailer ball system.
-
If the ball is ever able to move with minimal force by hand more than five degrees from the vertical position, the product must be replaced. Use of a heavily worn or damaged trailer ball assembly may result in the trailer becoming separated from the vehicle. Consult CURT Product Support if you have any questions.
-
Periodically check the hex nut and ensure it is tightened to the correct torque specifications.
-
Before every use, be sure the snap ring on the pivot pin of the trailer ball assembly is in place and properly seated.
-
Immediately discontinue product use if the snap ring is missing on the end of the trailer ball pivot pin or if the trailer ball pin has backed partially out of the trailer ball assembly.
-
Do not use the trailer ball on ball mounts that do not have a flat mounting surface. The trailer ball assembly and anti-rotation base plate must fully contact the ball mount when the hex nut is torqued to the listed specification.
Product Photo
ASSEMBLY
Item
|
Qty
| Description
---|---|---
1
|
1
| Trailer ball assembly
2
|
1
| Anti-rotation base plate
3
|
1
| Lock washer, 1-1/4″
4
|
1
| Hex nut, 1-1/4″
Ball mount sold separately
Step 1
Place the anti-rotate base plate (#2) over the trailer ball shank (#1).
The trailer ball must be mounted so that the ball articulation is in the same
direction as vehicle travel.
Place the lock washer (#3) over the trailer ball shank and secure with the provided hex nut (#4).
The anti-rotation base plate must be used in the orientation shown or serious
injury or death may result.
The anti-rotation base plate tabs must fit freely over the width of the ball
mount tongue or serious injury or death may result.
Step 2
Tighten the hex nut (#4) to 450 ft-lbs. The threaded shank must extend
beyond the nut when tightened.
Failure to tighten hardware to the specified torque can result in serious
injury or death.
Step 3
Grease the trailer ball assembly, using the grease zerk located on the bottom
of the shank, before initial use and periodically, with a high-quality
molybdenum-based grease.
Failure to grease the trailer ball assembly may lead to failure and can result
in serious injury or death.
CURTMFG.COM • NEED ASSISTANCE? • 877.287.8634 • 40249 -INS-RC
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>