CURT 58000 Easy-Mount Electrical Bracket Instruction Manual
- June 3, 2024
- Curt
Table of Contents
CURT 58000 Easy-Mount Electrical Bracket
PARTS LIST
| Item# | Qty | Description |
|---|---|---|
| 1 | 8 | Nylock nut, M5 – 0.8 |
| 2 | 2 | Carriage bolt, M5 – 0.8 x 20mm |
| 3 | 2 | Carriage bolt, M5 – 0.8 x 100mm |
| 4 | 4 | Pan head slotted screw, M5 – 0.8 x 20mm |
| 5 | 1 | Mounting bracket |
WARRANTY
CURT Manufacturing LLC., warrants this product to be free of defects in
material and/or workmanship at the time of retail purchase by the original
purchaser. If the product is found to be defective, CURT Manufacturing LLC.,
may repair or replace the product, at their option, when the product
is returned, prepaid, with proof of purchase. Alteration to, misuse of, or
improper installation of this product voids the warranty. CURT Manufacturing
LLC.’s liability is limited to repair or replacement of products found to be
defective, and specifically excludes liability for incidental or consequential
loss or damage.
NOTES
Prior to installing the electrical bracket check for adequate clearance for
the bracket, plug(s) and wiring. Forming the lower bracket flange prior to
installation can help create a tighter fit during installation. Do this by
pushing the lower flange against the ground until it creates a snug fit around
the receiver tube. See Detail A.
INSTALLATION
Step 1
Attach the 6- or 7-way plug and the 4- or 5-way flat
using the provided hardware, as shown. Tighten the hardware evenly until snug.
Overtightening the hardware can cause the front of the bracket to bow or the
hardware to break.
Step 2
Slide the electrical bracket over the receiver tube collar.
Step 3
Secure the electrical bracket to the receiver tube collar using the provided
hardware, as shown.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>