MAXXTER ACT-DACW-01 Digital Alarm Clock with Wireless Charging Function User Manual

MAXXTER ACT-DACW-01 Digital Alarm Clock with Wireless Charging Function

Features

• Digital alarm clock with wireless charging function
• Built-in wireless charging module for easy charging of your iPhone X/XS/XR, iPhone 8, Galaxy S8/S7/S6 and other devices with wireless charging function
• Large LCD display shows time, date and temperature
• Dual alarm function allows to set 2 separate wake-up alarms

Specifications

•  Input power: 5V/1.5A
• Wireless Output: 5V/1A 5W

PRODUCT OVERVIEW

1. ON/OFF
2. UP
3. MENU
4. DOWN
5. Micro USB Input
6. Time Display
7. Temperature Display
8. Wireless Charging Pad
9. Reset

POWER

Press to power on. The LED display will show Time and Temperature.

DISPLAY

Press to switch between different display modes (time/date/alarm1/2/3).

SET TIME

Press until the display shows the time.
Long press until the time is blinking. The display panel will shows 12H mode or 24H mode.
Press to select 12H or 24H mode and press to confirm the mode (if 12H mode is selected, then “PM/AM” will light up at the left corner of display).
Press  to adjust the Hour first.
Press to confirm the Hour and minutes will blink.
Press to adjust the minutes.
Press to confirm the minutes.

SET DATE

Press until the display shows the date.
Long press until the year is blinking.
Press to change the year.
Press to confirm the year and month will start blinking.
Press to change the month.
Press to confirm the month and day will start blinking.
Press to change the day.
Press to confirm the date.

SET ALARM

This alarm clock has 3 separate alarm settings, A1, A2 and A3, which can be set individually.

Press until the display shows”–A1″,”–A2″ or”–A3″.
Long press until the alarm time is blinking.
Press to adjust the Hour first.
Press to confirm the Hour and minutes will blink.
Press to adjust the minutes.
Press to confirm the minutes.
Press to determine the clock.

ENABLE or DISABLE ALARM

Press until the display shows “–A1″,”–A2″ or”–A3″. “–A1” means alarm  1 is disabled. “0NA1″means alarm 1 is enabled.

Press to enable or disable the selected alarm (1, 2, or 3).

When one of the alarm times is enables, the display will show the alarm icon in the lower left corner of display.
On the set alarm time(s), the alarm buzzer will start beeping and the alarm will be blinking. Press any button to stop the sound. If no button is pressed, the sound will stop after 60 seconds.

TEMPERATURE

Press for 2 seconds to switch between Fahrenheit / Celsius.

POWER-SAVING

When power-saving is enabled, the clock display will automatically turn off after 30 seconds. Press any button to turn it on again.
Short press to turn on/off the power-saving (“ONSd” means the power saving mode is turned on and “– Sd” means it is turned off).

DISPLAY SETTINGS

The display has 3 settings. Depending on the selected setting, the display will show either the time, the date or alternate between date and time.

Press button to select DP–1/DP–2/DP–3.

DP-1 : Display will alternate between time and date automatically every 4 seconds.
DP-2 : User can fix to show date or time.
DP-3 : Display shows time. Press to show date for 4 seconds.

Waste disposal:
Do not deposit this equipment with the household waste. Improper disposal can harm both the environment and human health. For Information about waste collection facilities for used electrical and electronic devices, please contact your city council or an authorized company for the disposal of electrical and electronic equipment.

References

• maxxter.biz

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>