GEPRC GEP-35A-F7 Flight Controller User Manual
- June 6, 2024
- GEPRC
Table of Contents
GEPRC GEP-35A-F7 Flight Controller User Manual
SPECS:
- Model Name:GEP-35A-F7
- MCU: STM32F722
- IMU: MPU6000 gyro/accelerometer(SPI)
- Firmware target: GEPRCF722
- OSD: Betaflight OSD w/ AT7456Ev
- Current: YES
- OSD: YES
- Beeper: YES
- LED: YES
- USB: micro USB
- BEC output: 5V@1A
- Intergrated LC Filter
ESC MCU: BB21F16G
Continuous current: 35A
MAX current: 45A (10s)
Input: 2~6S
Supports: Dshot600,Oneshot,Multishot
Current meter: 210
Traget: G_H_30
Size: 32x32mm Board
Installing Hole: 26.5×26.5mm,M2
Weight: 8.3g
Instruction Diagram
DJI Digital FPV System
Note: not all combinations are valid. When the flight controller firmware detects this the serial port configuration will be reset.
Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.
Receiver
Note: not all combinations are valid. When the flight controller firmware detects this the serial port configuration will be reset.
Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.
F. Port
CLI:
set serialrx_halfduplex = ON
set serialrx_inverted = ON save
FlySky FSA8S V2
VTX
TBS UNIFY PRO 5GB
Camera
LED and Buzzer
GPS
Official website