GEPRC RAD Whoop 5.8G VTX User Manual
- June 5, 2024
- GEPRC
Table of Contents
GEPRC RAD Whoop 5.8G VTX
RAD WHOOP 5GB VTX
SPECS
- Brand: GEPRC
- Item name: RAD Whoop 5GB VTX
- Installing Hole: 25.5-26.5mm compatible
- Output power: pit/25/200/400mW
- switchable Channels: 40CH
- Input Voltage: 5V
- Current: MAX 5V@400mA
- Antenna: UFL
- Frequency: 5.8 GHZ
- Video Format: PAI/NTSC
- Control protocol: IRC Tram
- Weight: 2g
Ports
Connect the sample
Tune the VTX using IRC
- Turn on the remote control,THR middle,YAW left,PITCH up,enter the OSD menu.
- The PITCH moves the cursor up and down, and the ELE right to enter the next item. Finally,save and exit.
Frequency table
- Scan the QR code below or Open the link by browser : (geprc.com/rad-400mw-irc-tramp) and Copy the CLI Dump’s VTX table code.
- Open the Betaflight, Click on the “CLI”, Paste the code just copied before, and click enter on the keyboard.
Use the buttons to adjust the VTX
- Press and holding the button for 2 seconds, the blue light flashes, enter the frequency adjustment mode, click quickly to switch frequency points
- After switching frequency points. Press and hold the button 2-seconds again within five seconds, the green light flashes, enter the channel adjustment mode, click quickly to switch channels
- After switching channels, press and hold the button 2-seconds again within five seconds, the red light flashes, enter the power adjustment mode, and click quickly to adjust Power
Include
- 1 x GEPRC RAD Whoop SGS VTX
- 1 x GEPRC RAD Whoop SGS VTX Manual 1 x RG17S Antenna U.FL
- 1 x SH1.0-6Pin cable 100mm
- 1 x SH1.0 to SH1.2S interface Cable
Contact:
Website: http://geprc.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>