OHIO STEEL 4048PS-ATV 12.5 cu ft Poly Swivel ATV Dump Cart Owner’s Manual
- June 6, 2024
- OHIO STEEL
Table of Contents
PROFESSIONAL GRADE
048PS-ATV
12.5 cu ft POLY SWIVEL ATV DUMP CART
READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT
Safety Rules
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Read and understand all safety rules and operating instructions before using
this ATV/UTV attachment.
Follow all safety rules and operating instructions provided by your vehicle’s
manufacturer when using attachment.
Never allow children or untrained persons to operate vehicle or attachment.
Do not exceed the vehicle manufacturer’s towed weight limit.
Reduce vehicle speed and allow extra stopping distance when towing heavy
loads.
Reduce vehicle speed and towed weight when operating on slopes.
Operate up and down slopes, never across the face of slopes.
Do not carry passengers on vehicle or attachment.
Avoid sudden turns or maneuvers.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage
is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or
replace fasteners as needed before using.
Do not exceed vehicle speed of 20 miles per hour when towing Dump Cart.
Do not exceed Dump Cart rated weight capacity of 1250 pounds.
Carton Contents
TOOLS REQUIRED FOR ASSEMBLY:
- 9/16″ Wrench and Socket
- 1/2″ Wrench and Socket
- Needle-Nose Pliers
- Grease Gun
Assembly Instructions
-
Attach Undercarriage to Poly Body and tighten hardware.
-
Attach Front Support to Poly Body and tighten hardware.
-
Insert Stub Axles into Undercarriage and secure with pins as shown.
-
Slide Washers, Spacers and Wheels onto Stub Axles and install Cotter Pin. Bend legs of Cotter Pin to secure.
-
Align holes in Swivel Clevis and Undercarriage and install Pin as shown. Secure Pin on both ends with Hairpins.
-
Attach Ball Coupler and Bracket to Drawbar and tighten hardware as shown.
Operating Instructions
Before Using Dump Cart:
- Apply lithium grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel.
- Check tire pressure and inflate to 24 psi if needed.
- Read all Safety Rules found on page 1.
How to Use Dump Cart:
- Attach Dump Cart to your ATV or UTV.
- Do not exceed 1250 pounds when loading material into the cart body.
- Distribute the weight of the load as evenly as possible in the cart body for best handling.
- When hauling heavy loads, verify that your vehicle has adequate towing and braking capacity.
- Do not exceed 20 miles per hour when towing Dump Cart.
How to Empty Dump Cart:
- Step down the foot pedal to release the latch mechanism.
- Lift the body and swivel as desired to guide the material to preferred location.
- Lift the body entirely and empty material.
- Lower the body and guide the latch into the drawbar and relatch.
Periodic Maintenance:
- Tighten fasteners as needed before each use
- Check tire pressure before each use
- Grease wheels annually
Do-It-Yourself Accessories
Warranty
If this product fails due to a defect in material or workmanship within TWO
YEARS from the date of purchase, we will at our option repair or replace it
free of
charge. This warranty excludes tires and wheels, which are expendable and
become worn during normal use.
This warranty does not cover:
- Repairs necessary because of operator abuse or negligence.
- Equipment used for commercial or rental purposes.
- Paint that is worn or faded due to normal use or exposure.
To arrange for product repair call
1-800-652-2321, or return this product
to the place of purchase for a replacement.
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. This warranty applies only while
this product is in use in the United States.
In the space below record the purchase date of your Dump Cart.
Model Number 4048PS-ATV
Purchase Date__
Keep this Owner’s Manual and your receipt in a safe place for future
reference.
After the two year warranty period all replacement parts may be ordered by
calling 1-800-652-2321.
When ordering replacement parts, always give the following information:
- Product 12.5 cu ft POLY SWIVEL ATV DUMP CART
- Model Number 4048PS-ATV
- Part Number_____
- Part Description__
Repair Parts
ITEM| PART NO| DESCRIPTION| QTY| ITEM| PART NO|
DESCRIPTION| QTY
---|---|---|---|---|---|---|---
1| 311161| POLY BODY| 1| 21| 6000305| FOOT PEDAL| 1
2| 6000320| UNDERCARRIAGE| 1| 22| 6000309| LATCH| 1
3| 6000311| FRONT SUPPORT| 1| 23| 6000321| CLEVIS, SWIVEL| 1
4| 6000727| WHEEL| 2| 24| 300061| HEX NUT, 3/8-16 C-LOCK| 4
5| 6000523| AXLE, STUB| 2| 25| 6000369| SHOULDER BOLT, 1/2″ X3/8″| 1
6| 308301| COUPLER, 1-7/8″ BALL| 1| 26| 6000324| BEARING| 2
7| 6000760| BRACKET, COUPLER| 1| 27| 3000720| WASHER, 3/8″ USS| 1
8| 300121| SPACER| 2| 28| 300075| WASHER, 1/2″ USS| 1
9| 300087| COTTER PIN, 3/16″ X1-1/2″| 2| 29| 6000368| WASHER, SPRING| 1
10| 300076| WASHER, 1″ SAE| 4| 30| 6000325| SPRING, LATCH| 2
11| 3000811| CLEVIS PIN, 1/4″ X1-1/2″| 2| 31| 6000370| HEX BOLT, 3/8-16
X3-1/2″| 4
12| 3000812| HAIRPIN COTTER, 1-3/16″| 2| 32| 300055| HEX BOLT, 3/8-16X3″| 1
13| 3000528| HEX BOLT, 5/16-18 X1-1/2″| 4| 33| 6000371| PIN, 1/2″ X2-13/32″| 1
14| 6000373| HEX BOLT, 5/16-18 X3″| 8| 34| 6000372| HAIRPIN COTTER, 1-9/16″| 2
15| 6000409| LOCKWASHER, 5/16″ (BLACK)| 12| 35| 6000323| DRAWBAR ASSY (incl.
20-34)| 1
16| 6000410| HEX NUT, 5/16-18 (BLACK)| 12| 36| 6000764| OWNERS MANUAL| 1
17| 3000511| HEX BOLT, 3/8-16 X1″| 4| 37| 6000761| HARDWARE BAG, 4048PS-ATV| 1
18| 300077| WASHER, 3/8″ SAE| 8| 38| 6000162| DECAL, OSI PRO| 1
19| 3000618| LOCKNUT, 3/8-16| 6| | | |
20| 6000322| DRAWBAR| 1| | | |
www.OHIOSTEEL.com
800-652-2321
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>