OHIO STEEL INDUSTRIES 10T 24×36 Lawn Roller Instruction Manual
- June 13, 2024
- OHIO STEEL INDUSTRIES
Table of Contents
10T
24 X 36 LAWN ROLLER
**** READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT
Safety Rules
**** This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that follow this symbol to
avoid possible injury or death.
Read and understand all safety rules and operating instructions before using
this tractor attachment.
Follow all safety rules and operating instructions provided by your tractor’s
manufacturer when using attachment.
Never allow children or untrained persons to operate vehicle or attachment.
Do not carry passenger on vehicle or attachment. Avoid sudden turns or
maneuvers.
Do not remove warning decals from product. Do not tow attachment on public
roadways.
Check product for worn, loose or damaged parts before each use. If any damage
is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or
replace fasteners as needed before using.
Warranty
IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE
Email cs@ohiosteel.com or call
1-800-652-2321, ext. 212
AttachReceipt Here:
Before you call, please email our customer service team at cs@ohiosteel.com with the following:
- A description of the issue you are having
- Photos of the issue that include an overall view and detailed view from A description of the issue you are having multiple angles
- If applicable, a short video showing the issue
Replacement Parts:
You can place your parts order online at
ohiosteel.com/partsstore
- You can also reach our Customer Service Department at 1-800-652-2321, ext. 212
- If you are ordering replacement part(s) for your product, please note that some parts are only available as a repair kit.
If this product fails due to a defect in material or workmanship within THREE
YEARS from the date of purchase, we will at our option, only with receipt of
purchase, repair or replace it free of charge. This warranty excludes the
bushings and drainplug, which are expendable and become worn during normal
use.
This warranty does not cover:
- Repairs necessary because of operator abuse or negligence.
- Equipment used for commercial or rental purposes.
- Paint that is worn or faded due to normal use or exposure.
To arrange for product repair visit ohiosteel.com/customer-
support and fill out the warranty
repair form. You can also call
1-800-652-2321, ext. 212 to speak to
our Customer Service Team
This warranty gives you specific legal rights, and you may also have other
rights which may vary from state to state. This warranty applies only while
this product is in use in the United States.
Carton Contents
TOOLS REQUIRED FOR ASSEMBLY
- 9/16″ Wrench or Socket
- Pliers
Assembly Instructions
- Slide Side Bar Assembly (2) over axle with the flanges of the pressed in bearing towards the inside of the roller head, add Washer (6) and lock in place by inserting and spreading ends of the Cotter Pin (7).
- Add Roller Hitch Weldment (3) to side bars using 3″ Bolts (4) and 3/8″ Nuts (5).
- Install Hitch Pin (10) and Hairpin Cotter (11) as shown.
Operating Instructions
Before Using Lawn Roller:
Read all Safety Rules found on page 1.
Though most rollers are filled with water, we recommend adding Ethylene Glycol
Anti-Freeze with the water. This will protect the tank from damage during cold
weather. It is also recommended that the anti-freeze used, contain a rust
inhibitor to protect the inside of the tank against rust. If the roller is
filled with water only, it must be drained whenever the temperature drops
below 32 degrees F. (0 degrees C). The roller weighs approximately 600 pounds
when filled. Safe disposal of the antifreeze is recommended. Please follow the
Anti-Freeze manufacturers warnings and disposal methods.
Repair Parts
| ITEM NO. | PART NO | DESCRIPTION | QTY. |
|---|---|---|---|
| 1 | 504003-B2 | DRUM, ROLLER, 2436 (BLACK) | 1 |
| 2 | 6000830-B2 | BAR, SIDE, 2436 (BLACK)(BUSHING INCLUDED) | 2 |
| 3 | 6003900-B2 | HITCH, ROLLER (BLACK) | 1 |
| 4 | KIT 3040348 | HEX BOLT, 3/8-16 X 3″ (BLACK) | 2 |
| 5 | HEX NUT, 3/8-16 KEPS (BLACK) | 2 | |
| 6 | WASHER, 1″ SAE (ZINC) | 2 | |
| 7 | COTTER PIN, 3/16′ X 1-1/2″ (ZINC) | 2 | |
| 8 | KIT 6000770 | PIN, HITCH, 1/2″ X 3″ (ZINC) | 1 |
| 9 | COTTER HAIRPIN, 3/32″ X 2-5/16″ (ZINC) | 1 | |
| 10 | 50401 | PLUG, DRAIN, ROLLER | 1 |
| 11 | KIT 6004719 | KIT, ROLLER BUSHINGS (SET OF 2) | – |
Proudly designed and tested in Columbus,
Ohio.
Manufactured in the U.S.A. from domestic and imported components. 
MODEL # 10T
2575 Ferris Road Columbus, OH 43224
800-652-2321
www.OHIOSTEEL.com
800-652-2321
REPLACEMENT PARTS ORDERING
1-800-652-2321
References
- Support - Ohio Steel IndustriesOhio Steel Industries
- Parts Store - Ohio Steel IndustriesOhio Steel Industries
- Home - Ohio Steel IndustriesOhio Steel Industries
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>