OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart Instruction Manual

October 30, 2023
OHIO STEEL INDUSTRIES

OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart 3048HKD
12 cu ft STEEL DUMP CART

READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT

Safety Rules

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Read and understand all safety rules and operating instructions before using this tractor attachment.
Follow all safety rules and operating instructions provided by your vehicle’s manufacturer when using attachment.
Never allow children or untrained persons to operate vehicle or attachment.
Do not exceed the vehicle manufacturer’s towed weight limit.
Reduce vehicle speed and allow extra stopping distance when towing heavy loads.
Reduce vehicle speed and towed weight when operating on slopes.
Operate up and down slopes, never across the face of slopes.
Do not carry passengers on vehicle or attachment.
Avoid sudden turns or maneuvers.
Do not tow attachment on public roadways.
Do not remove warning decals from product.
Check product for worn, loose, or damaged parts before each use. If any damage is present, repair the product before using.
Check product for loose or missing fasteners before each use. Tighten or replace fasteners as needed before using.
Do not exceed vehicle speed of 6 miles per hour when towing Dump Cart.
Do not exceed Dump Cart rated weight capacity of 1000 pounds.

Carton Contents

OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Carton
Contents

TOOLS REQUIRED FOR ASSEMBLY:

  • Large Flat Screwdriver
  • Grease Gun
  • 1/2″ Wrench or Socket

Assembly Instructions

  1. Place body halves on a smooth, flat surface so they are square and fasten together with hardware as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly
  2. Attach front support to body and tighten with hardware as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 1
  3. Attach undercarriage to body and tighten with hardware as shown.
  4. Attach front gate to inside of body with supplied hardware as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 3
  5. Attach corner bumpers to body of cart and tighten with hardware as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 4
  6. Insert axle into undercarriage halfway as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 5
  7. Slide axle completely through undercarriage; be sure to catch the drawbar when sliding the axle. Align drawbar with the front support and press down to latch.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 6
  8. Slide washers, spacers, and wheels onto axle and secure with hairpins as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 7
  9. Attach the support bar to body behind flange loosely.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Assembly 8
  10. Attach corner gussets to rear and sides of body and tighten with hardware as shown.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - corner
  11. Attach tailgate to body as shown. No hardware is required, tailgate should move freely up or down.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - corner 1
  12. Install hitch pin and hairpin to secure to attachment vehicle.OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - corner 2

Operating Instructions

Before Using Dump Cart:

  1. Apply grease to wheels using grease gun until grease can be seen squeezing out from both sides of the wheel.
  2. Read all Safety Rules found on page 1.
  3. Check tire pressure and inflate to 30 psi if needed

How to Use Dump Cart:

  1. Attach Dump Cart to your tractor using the supplied hitch pin.

  2. Do not exceed 1,000 pounds when loading material into the cart body.

  3. Distribute the weight of the load as evenly as possible in the cart body for best handling. braking capacity.

  4. When hauling heavy loads, verify that your vehicle has adequate towing and

  5. Do not exceed 6 miles per hour when towing Dump Cart.
    How to Empty Dump Cart:

  6. Pull hand lever forward to release the latch mechanism.

  7. Angle cart body as desired to guide the material to preferred location.

  8. Lower the body and guide the latch into the drawbar and relatch.

Periodic Maintenance:

  • Tighten fasteners as needed before each use
  • Check tire pressure before each use
  • Grease wheels annually

Warranty

If this product fails due to a defect in material or workmanship within TWO YEARS from the date of purchase, we will at our option repair or replace it free of charge. This warranty excludes tires and wheels, which are expendable and become worn during normal use.
This warranty does not cover:

  • Repairs necessary because of operator abuse or negligence.
  • Equipment used for commercial or rental purposes.
  • Paint that is worn or faded due to normal use or exposure.

To arrange for product repair call 1-800-652-2321, or return this product to place of purchase for replacement. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. This warranty applies only while  this product is in use in the United States. In the space below record the purchase date of your Dump Cart.
Model Number 3048HKD
Purchase Date
Keep this Owner’s Manual and your receipt in a safe place for future reference. After the two year warranty period all replacement parts may be ordered by calling 1-800-652-2321.
When ordering replacement parts, always give the following information:

  • Product 12 cu ft STEEL DUMP CART
  • Model Number 3048HKD
  • Part Number
  • Part Description

Repair Parts

OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Repair
Parts

ITEM| PART NO| DESCRIPTION| 01Y| ITEM| PART NO| DESCRIPTION| OTY
---|---|---|---|---|---|---|---
1| 401011| BODY HALF, RIGHT| 1| 16| 300053| HEX BOLT, 3/8-16 X 4″| 1
2| 401021| BODY HALF, LEFT| 1| 17| 300061| HEX NUT, 3/8-16 C-LOCK| 2
3| 401031| GATE, FRONT| 1| 18| 300011| WHEEL (bushings included)| 2
4| 401041| TAILGATE| 1| 19| 300001| AXLE| 1
5| 401051| CORNER GUARD| 2| 20| 3000721| 3/4″ SAE WASHER| 4
6| 401061| UNDERCARRIAGE| 1| 21| 300126| SPACER 3/4″ X 1.250″| 2
7| 401071| RETAINER GATE, RIGHT| 1| 22| 6000533| PIN, HITCH| 1
8| 401081| RETAINER GATE, LEFT| 1| 23| 300084| HAIRPIN COTTER| 3
9| 401091| SUPPORT, FRONT| 1| 24| 300054| TRUSS HD SCREW. 5/16-18 X3/4″| 46
10| 401131| BAR SUPPORT, REAR| 1| 25| 6000418| 5/16 – 18 SPINNER GRIP NUT| 46
11| 501012| HITCH, DRAWBAR ASSEMBLY| 1| 26| 6000783| OWNERS MANUAL|
12| 401111| LATCH POST| 1| 27| 3010355| HARDWARE BOLT BAG| 1
13| 401121| BRACKET, HITCH| 1| 28| 300111| DECAL, 051| 1
14| 300131| SPRING, LATCH| 1| 29| 6000809| KIT, 3/4″ BUSHINGS (set of 4)| 1
15| 300052| HEX BOLT, 3/8-16 X 3/4′| 1| | | |

REPLACEMENT PARTS ORDERING OHIO STEEL INDUSTRIES 1-800-652-2321

DESIGNED AND TESTED IN COLUMBUS,
OHIO MANUFACTURED IN THE U.S.A. FROM DOMESTIC AND IMPORTED COMPONENTSOHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart - Bar
Code 2575 Ferris Road Columbus, OH 43224
(800) 652-2321
www.OHIOSTEEL.com
(800) 652-2321

Documents / Resources

| OHIO STEEL INDUSTRIES 3048HKD 12 cu ft Steel Dump Cart [pdf] Instruction Manual
6000783, 3048HKD 12 cu ft Steel Dump Cart, 3048HKD, 12 cu ft Steel Dump Cart, Steel Dump Cart, Dump Cart, Cart
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals