erica synths BlackLPG Black LPG Analog Eurorack Low Pass gate Module User Manual

June 6, 2024
erica synths

erica synths BLACK
LOWPASS GATE

THANK YOU FOR CHOOSING
ERICA SYNTHS BLACK SERIES MODULE!
Erica Black Series include high-end, unique functionality and superior quality modules. Only the best, highest quality components are used, all inputs and outputs are protected against undesired overvoltage. Erica Black Series consists of a range of modules that are needed to put together the entire synth.  Enjoy!
Erica Synths Black LPG is our take on the Lowpass Gate idea – it’s designed from scratch module featuring 2nd order lowpass VCF (the original Buchla lowpass gate was 1st order VCF) and VCA combo with distinct resonance circuit on top. Voltage control over VCF auto frequency/VCA offset and mode (VCF/VCF+VCA/VCA), as well as built-in decay envelope generator makes it a versatile module for sound shaping in any modular setup.

FEATURES:

Three factors for 2nd order VCF
VCF/VCF+VCA/VCA modes
Manual and voltage controlled auto-off/offset
Manually and voltage-controlled mode selection
Manually resonance depth control
Resonance overdrive switch
Built-in decay envelope generator
Manually and voltage-controlled decay time
Envelope CV output
Skiff-friendly design

SPECS:

Audio output amplitude 10Vptp
CV range (full span) -5V – +5V
Max Decay time 4’’
Panel width  10HP
Module depth  35mm
Power consumption 44mA@+12V, 45mA@-12V

erica synths BlackLPG Black LPG Analog Eurorack Low

SAFETY INSTRUCTIONS

Please follow the instructions for use of the Erica Synths module below, ‘cause only this will guarantee proper operation of the module and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices unless they are made waterproof. This Erica Synths module is NOT intended for use in a humid or wet environment. No liquids or other conducting substances must get into the module. Should this happen, the module should be disconnected from mains power immediately, dried, examined, and cleaned by a qualified technician.
Do not expose the module to temperatures above +50° C or below -20° C. If you have transported the module to extremely low temperatures, leave it in room temperature for an hour before plugging it in.

Transport the instrument carefully, never let it drop or fall over. Warranty does not apply to modules with visual damages.

The module has to be shipped in the original packaging only. Any module shipped to us for return, exchange, and/or warranty repair has to be in its original packaging. All other deliveries will be rejected and returned to you. Make sure you keep the original packaging and technical documentation.
This device complies with the EU guidelines and is manufactured RoHS conforming without the use of lead, mercury, cadmium, and chrome. Nevertheless,  this device is special waste, and disposal in household waste is not recommended.

User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8.
Copying, distribution, or any commercial use in any way is prohibited and needs written permission by Erica Synths.
Specifications are subject to change without notice. In case of any questions, feel free to contact us through www.ericasynths.lv.
You will find Erica Synths terms of warranty at www.ericasynths.lv
Items for return, exchange, and/or warranty repair have to be registered at SUPPORT on www.ericasynths.lv and send back to us according to instructions on the support page.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals