erica synths K-PHASER Eurorack Analog Phaser Module Instructions
- June 6, 2024
- erica synths
Table of Contents
erica synths K-PHASER Eurorack Analog Phaser Module
THANK YOU FOR PURCHASING THIS ERICA SYNTHS BLACK SERIES MODULE!
The Erica Black Series includes high-end modules with unique functionality and
superior build quality. Only the best, highest quality components are used,
all inputs and outputs are protected against undesired overvoltage. When
designing the Black Series, we placed an emphasis on usability with the goal
of providing an enjoyable user experience. Big knobs are assigned to functions
that make differences in sound. The Erica Black Series consists of a range of
modules that are needed to put together an entire synth. Enjoy!
The Erica Synths Black K-Phaser is our take on a classical, genre defining FX unit – the Krautrock Phaser. It retains the original concept of 8 all-pass filters with photoresistors, but we redesigned the filters and modulation circuit and added several unique features. A dip switch allows for selecting the number of filter stages involved in the resonance path, while the resonance attenuverter brings in never-heard-before feedback artefacts, and most importantly – the SPREAD mode detunes the all-pass filters for even more distinct behavior. A built-in voltage controlled LFO with selectable waveforms expands the modulation possibilities of the phaser and can be used as an independent modulation source for your modular system as well. The Black K-Phaser is our tribute to the German electronic music pioneers that largely shaped the sound of electronic music worldwide.
FEATURES
- 8 all-pass filters with photoresistor control
- Classic and Spread (filter detune) modes
- Resonance attenuverter
- Selectable resonance path
- Built in VC LFO with a dedicated output
- Wet output
SPECS
Audio level 10Vptp
CV level (full span) -5V – +5V
Max power consumption +88mA, -32mA,78mA@-12V
Module width 10HP
Module depth 35mm
SAFETY INSTRUCTIONS
Please follow the instructions for use of the Erica Synths module below, cause only this will guarantee proper operation of the module and ensure warranty from Erica Synths.
- Water is lethal for most of the electric devices, unless they are made waterproof. This Erica Synths module is NOT intended for use in a humid or wet environment. No liquids or other conducting substances must get into the module. Should this happen, the module should be disconnected from mains power immediately, dried, examined and cleaned by a qualified technician.
- Do not expose the module to temperatures above +50° C or below -20° C. If you have transported module in extreme low temperatures, leave it in room temperature for an hour before plugging it in.
- Transport the instrument carefully, never let it drop or fall over. Warranty does not apply to modules with visual damages.
- The module has to be shipped in the original packaging only. Any module shipped to us for return, exchange and/or warranty repair has to be in its original packaging. All other deliveries will be rejected and returned to you. Make sure you keep the original packaging and technical documentation.
- This device complies to the EU guidelines and is manufactured RoHS conforming without use of lead, mercury, cadmium and chrome. Nevertheless, this device is special waste and disposal in household waste is not recommended.
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8.
Copying, distribution or any commercial use in any way is prohibited and needs
the written permission by Erica Synths. Specifications are subject to change
without notice.In case of any questions, feel free to contact us through www
.erica-synths.lv
You will find Erica Synths terms of warranty at
www.ericasynths.lv
Items for return, exchange and/or warranty repair have to be registered at
SUPPORT on www.ericasynths.lv and send back to us
according to instructions in the support page.