Allcam T810 4K Ultra HD 1CH WiFi GPS DashCam User Manual

Ultra HD True 4K Dash Cam
User Manual
Ver1.0

Overview

Ultra HD true 4K dash cam which records using state of the art camera from Sony and H.265 compression technology.

The specifications of This product are summarised as follows:

1.  Single-lens
   True 4K 2160P@30FPS

2. Dual lens (front and rear)
   True 4K 2160P@25FPS + 1080P@25FPS

3. Built-in WIFI function which allows you to wirelessly control the unit’s function via smartphone and also preview or download videos/pictures using the app.

4. Parking mode allows you to record continuously (via hardwire installation) even when the car is turned off.

5. Built-in GPS module allows for easy installation and path trajectory via google maps (speed and location) Since the unit is updated regularly, this manual is to be used as a reference only.

Structure

Key function and port

Power

• Press the Power key for 3 Secs to start the device and press it for 3 Secs again to power off.
• Press it once to screen off / on.

Up/ Lock

• In the menu interface, press it to scroll up.
• In video recording mode, press it to lock the video.
• In standby mode, press it to start recording a locked video.
• Press key and hold for 5 secs to toggle on/off the WIFI connection

OK / REC

• In the menu interface, press the button to confirm the selection.
• In standby mode, press the button to start/stop recording manually

MIC / Down

• In standby/video recording mode, press the button for 5 secs to turn on / off MIC.
• In the menu interface, press the button to scroll down.
• Press the button to switch between the front/rear camera frames.

Menu / Mode

• Press the button for 5 secs to switch video/photo/playback mode.

• In video/photo mode, press the button to enter the menu and press it again to exit
  Video Mode
  In video mode, press the button to enter the video settings menu. Press again to exit and start recording.
  Photo Mode
  In photo mode, press the button to enter the photo settings menu. Press again to exit.

• In playback mode, press the button to return to the previous interface.

TF Card Slot

• Supports 8GB-256GB TF card (U3 or above)

Rear Lens Port

• Use the rear camera cable to connect the rear camera.

USB Port

• Use the car charger cable to supply power via a 12V socket

Front Lens

• Takes images via CMOS sensor. Its angle can be adjusted.

Installing and Operation

Installation

• Make sure the car is switched off. Insert TF card to the card slot (TF card should be 8GB~256GB, U3 or above). If it is being used for the first time, please format the TF card (via app)
• Install the bracket to the device and use a 3M sticker to fix the device onto the front windshield of the car.
• Use the 3M sticker to fix the rear camera onto the rear windscreen.
• Use the rear camera cable to connect the rear camera to the rear lens port of the device.
• Plug the car charger into the car’s 12V socket and the USB end to the device’s power socket. (run the wires along the edge of the windshield)
• Adjust the front/rear lens position.
• Start the engine and check to make sure the device has been installed successfully.

if installed correctly, unit will power on/off with the car.
Be sure the protected film on the lens is peeled OFF.

Operation

• Turning ON/OFF Automatically On/Off:

When the car powers on/off, the device will be powered on/off automatically and start to record.

Precondition

1.  Available TF card is inside the device.
2. The charger has been connected to the device via the 12V socket or hardwires kit (professional installation required)

Manually On/Off:
Hold the power button for 5 secs to power on, and hold it again for 5 secs to power off.

Video Recording Mode Automatic Recording

after the car starts up, the device is automatically powered and begins to record immediately.
The red REC icon on the screen blinks.

Manual Recording
In the standby state, press the REC key to enter video recording mode and the red REC icon on the screen blinks. And press the REC key again to stop recording (the red REC icon disappears on-screen)

Photo Mode
Hold the Menu/Mode key for 5 secs to enter photo mode.
Press the OK key to take a photo.
Press Menu/Mode key to enter the menu setup option.

Video / Image Playback Mode
Press the UP/DOWN key to select the folder and press the OK key to select. Press the UP/DOWN key to select a file for playback. Press the OK key to start/stop playback.

Function and Using

Loop Recording

• What is loop recording?

The recorded videos can be set to contain more than 1 min per clip. EG 3 Min/5 Min can be recorded into a 1 min clip. Loop recording is the process of recording videos continuously to the memory card. This process is a never- ending one. At the end of the memory card, the latest video clip will replace the earliest video clip. This guarantees that the recorder will never miss any action or accidents in live events.

How to change settings:
In standby mode, enter the menu. Use the DOWN key to select the loop recording function press OK to set different clip times: 1MIN / 3MIN / 5MIN

G-Sensor Function
·What is the G-Sensor function?
During normal recording, once the G-sensor detects a collision or large enough vibration (depending on the setting) the device will lock the current video to avoid deletion by loop recording.

• How to change settings?

In standby mode, enter the menu. Use the DOWN key to select the G-sensor function. Move to “G-Sensitivity” and press OK to set: OFF/LOW/MIDDLE/HIGH.

If “Off” is selected, the G-sensor function will be turned off.

Motion Detection

• What is motion detection?

Motion detection is the process of detecting movement in the lens (can only be used via hardwire installation, parking mode) In parking mode, when it detects movement in the lens, it will start to record until the image is still for 10 seconds.

It helps to save memory space.

• How to change a setting?

In standby mode, enter the menu. Use the DOWN key to select the motion detection function, when the cursor moves to “Motion Detection”, press the OK key to
Set: OFF/LOW/MIDDLE/HIGH, If “Off” is selected, the motion detection function will be turned off.

Please set it to “Off” if you do not have a hardwire installation If not, the unit may not turn on automatically on car power up.

*GPS

·What is GPS?
GPS is the Global Positioning System. With this function, the device can automatically update time, locate and record your travel route, time, date, speed, and so on.

• How to change the settings?

In standby mode, enter the menu, find the GPS Time option and select ON. If “OFF is selected, GPS will not work. Set your current time zone in this menu (If the time zone setting is incorrect, the time for the automatic update will be incorrect.)

• How to view GPS data?

Download our player to your PC, play the video and it will show GPS data on the video at the same time.

Be sure that your PC is connected to the internet.

*WIFI

• What is WIFI?
  This device supports WIFI direct protocol. It means that the device can wirelessly transmit data without having to pass through a wireless router. Therefore, you can wirelessly control the device settings via smartphone. You can also preview or download videos or pictures from the device.

• How to change the settings?

In standby mode, enter the menu. Find the WIFI option and select ON (or hold the UP key for 5 secs). Download the “RoadCam” APP to your phone. Use the phone’s WIFI to search for the device (the WIFI name of the device is usually (T810WIFI). Enter a password to establish a connection (the default password is: 12345678). Open the APP and you can see a real-time video interface. Press the corresponding button to make the appropriate settings, preview, and download.

Specification

UHD 2160P@30FPS
QHD 1440P@30FPS
Rear Cam: FHD 1080P@25FPS
Video Format| H.265/H.264 compression format
Mic/Speaker| Built-in
Loop Recording| 1MIN /3 MIN /5 MIN
GPS| Supported and Built-In
WIFI| Supported
Back-up Power| Super Capacitor + button cell

Accessories

1.  In-car charging cable.
2. Mount (Bracket).
3. User Manual.
4. The rear camera and rear camera cable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>