Ronix 8653 230Nm Brushless Impact Screwdriver User Manual

Ronix 8653 230Nm Brushless Impact Screwdriver

Specifications:

Model| Battery Voltage| Battery Capacity| Battery Chemistry| Forward Mode| Reverse Mode| Chuck Size
---|---|---|---|---|---|---
8653| 20V| 2.0Ah| Lithium| 4 Speeds| 4 Speeds| 6.35mm
No-load Speed| Impact Rate| Standard Bolt Torque| High Tensile Bolt Torque| Torque Rate| Max Torque| Weight
1200-3200RPM| 1400-4000IPM| 60Nm – 230Nm| 230Nm| –| 1.39Kg (With 1pc 2.0Ah Battery)

Product Usage Instructions

Safety Precautions:

• Workplace Security: Keep the area clean and well lit. Do not use in explosive environments. Keep children and distractions away.
• Electrical Safety: Avoid contact with grounded objects. Do not expose to rain or wet conditions.
• Personal Safety: Follow instructions for safe use and maintenance.

Care and Maintenance:

• Precautions for Use: Follow instructions for safe usage. Do not use for operations other than intended.
• Cleaning: Keep tool clean and free of dust. Clean with a cloth or compressed air. Avoid water entering the tool.
• Maintenance: Recharge the battery at least once a year to maintain battery life.

Battery Usage:

• Charging the Battery Pack: Follow charging instructions provided in the manual.
• Battery Capacity Indicator: Check battery status by pressing the power display button on the battery.

FAQ:

Q: How often should I clean the tool?
A: It is recommended to clean the tool directly after each use to maintain its performance and longevity.

Q: Can I use the impact screwdriver for operations not provided in the manual?
A: It is not recommended to use the tool for operations other than those specified, as it may lead to dangerous situations.

Q: How do I know when to recharge the battery?
A: You can check the battery’s power status by pressing the power display button on the rear of the battery to determine when it needs recharging.

230Nm BRUSHLESS IMPACT
SCREW DRIVER
8653

TECHNICAL SPECIFICATION

No-load Speed

| 1200RPM

1900RPM

2500RPM

3200RPM

Impact Rate

| 1400RPM

2200RPM

3000RPM

4000IPM

Standard Bolt| Max M10
High Tensile Bolt| Max M8

Torque rate

| 60Nm

120Nm

180Nm

230Nm

Max Torque| 230Nm
Weight| 1.39Kg With 1pc 2.0Ah Battery

Includes

| 2pcs 2.0Ah battery 1pc 2.0A charger

PART LIST

WARNING!
READ,UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

SAFETY

WORKPLACE SECURITY

1. Keep the area clean and well lit. Cluttered or dark areas can cause accidents.
2. Do not use power tools in explosive environments, e.g. in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and people away during the use of the tool. Distractions can cause you to lose control of the tool.

ELECTRICAL SAFETY

1. Avoid contact with grounded objects such as pipes, radiators, stoves and refrigerators. There is an increased risk of electric shock if your body is in contact with grounded surfaces.
2. Do not expose power tools to rain or wet conditions. The penetration of water into a tool increases the risk of electric shock.

PERSONAL SAFETY

1. Be aware of what you are doing and use common sense while using the tool. Do not use a tool when you are tired or under the influence of drugs, alcohol or medication. A moment of distraction while using a tool can cause serious personal injury.
2. Use safety equipment. Always wear eye protection. Safety equipment such as dust masks, non-slip safety shoes, helmets or ear protection used in appropriate conditions will reduce the risk of injury.
3. Remove any adjusting key before turning the tool on. A key left attached to a rotating part of the tool may result in personal injury.
4. Do not rush. Maintain proper footing and balance at all times. This allows better control of the tool in unexpected situations.
5. Dress appropriately. Do not wear loose clothing or jewelry. Keep hair,clothing and gloves away from moving parts. Loose clothing, jewelry or long hair can get caught in moving parts.
6. If devices for connecting equipment for extraction and dust collection are supplied, make sure they are connected and properly used. Use of dust collection can reduce risks due to dust.

USE AND MAINTENANCE OF THE TOOLS

1. Do not force the tool. Use the right tool to the application being performed. A suitable tool will do the job better and more safely if used for the purpose for which it has been built.
2. Do not use the tool if the switch does not allow to turn ii on or off. Any tool that can not be controlled by the switch is dangerous and must be repaired.
3. Disconnect the power source supply or battery block tool before changing accessories or before storing the tool. These preventive safety measures reduce the risk of accidental starting of the tool.
4. Keep the tool off away from children and do not allow to be used by people who are not familiar with the tool. Tools are dangerous in the hands of inexperienced.
5. Disconnect the power supply and battery charger before changing accessories or before storing the tool. These preventive safety measures reduce the risk of accidental starting of the tool.
6. Make sure the tools moving parts are not aligned or blocked, that has not broken any parts or any other condition that may affect the operation of the tool. In case of damage, take the tool to a repair service before using it again. Many accidents are caused by poorly maintained tools.
7. Use the tool, accessories and blades, etc. according to these instructions, taking into account the working conditions and the work to be done. The use of the tool for operations other than those provided can lead to dangerous situations.

PRECAUTIONS FOR USE

1. Do not use any other charger than the one specified by the manufacturer. A charger that fits to a type of battery can cause a risk of Iire when used with other types of batteries.
2. Do not use tools with batteries other than those specified. The use of any other type of battery may create a risk of injury and fire.
3. If the batteries are not used, keep them away from other metal objects such as clips, coins, keys, nails, screws or other small objects that can lead to a connection from one terminal to another. Short-circuiting the terminals of a battery can cause burns or fire.
4. In bad conditions, liquid rnay be ejected from the battery; avoid any contact. In case of accidental contact, flush with water. If the fluid comes into contact with eyes, seek medical assistance. The ejected battery fluid may cause irritation or burns.

CARE AND MAINTENANCE

1. Repairs must be performed by a qualified expert, using only identical replacement parts. This will ensure that the safety of the tool is maintained.
2. Unplug tool and charger from the wall outlet before cleaning.

CLEANING

1. Keep protection devices, air vents and the motor housing as clean (dust free) as possible. Clean the tool with a clean cloth or clean with compressed air at low pressure.
2. We recommend cleaning the tool directly after each use.
3. Clean the tool regularly with a damp cloth and a little soap. Do not use any cleaner or detergent, they can damage the plastic parts of the tool.
   Ensure that no water enters the tool.

MAINTENANCE

1. Recharge the battery at least once a year to maintain battery life.

ENVIRONMENTAL PROTECTION
This device uses electronic components, so they should not be deposited with household garbagel Please help by collaborating to protect resources and the environment. Dispose of these products through relevant recycling services, if any. For questions on this matter please contact your local waste management or a specialized site.

BATTERY

CHARGING THE BATTERY PACK

1. Remove the battery pack (8) from the handle by pressing the battery lock button downwards and pulling the battery forwards and off the base of the tool.
2. Check if the power voltage on the rating plate corresponds to the voltage available.
3. Slide the battery pack onto the battery charger. The red LED will illuminate to indicate that the battery pack is being charged. When the charging process is finished, the red LED on the charging base will turn off and the green LED will illuminate. It takes approximately 1 hour to fully recharge an empty battery.
4. During charging, it is normal for the battery to warm slightly. If you cannot discharge the battery check:
   • That the electrical outlet has voltage.
   • That the charger contacts are undamaged and making contact with battery leads.

BATTERY CAPACITY INDICATOR
You can check the battery’s power status by pressing the power display button on rear of the battery.

All LEDs illuminated: The battery is fully charged.

• Only one Green LED illuminated: The battery is empty, recharge the battery.
• The LED lamp can be used in poor lighting conditions to illuminated the work area. The LED lamp will light up as soon as you press the trigger.

LED LAMP
The LED lamp (7) can be used in poor lighting conditions to illuminate the work area. The LED lamp will light up as soon as you press the trigger (6).

OPERATION

BEFORE USE

IMPORTANT!
Always lock the trigger switch and remove the battery from machine before doing any work on the machine!

INSERTING BATTERY ONTO THE TOOL
Set the rotational direction switch to the center position to protect the power tool against accidental starting. Insert the charged battery into the handle so that it can be felt to engage and faces flush against the handle.

OPERATING THE TOOL
To activate the tool, press the Trigger (6) and keep ii pressed. To switch off the machine, release the trigger.
The trigger is variable speed and the speed depends on the amount of pressure you apply to the trigger. Light pressure on the trigger results in a low rotational speed. Further pressure on the switch results in an increase in speed.

FORWARD (CLOCKWISE) OPERATION and 4th Speed OPERATION:
The motor has an electronic clutch with Four different forward speed setting: 1,2,3 and 4 (4 is the highest) The speed setting is adjusted by pushing the button on the Electronic clutch control panel (10) on the base of the tool. If the trigger is momentarily pushed the Electronic clutch will be activated.
If one Green LED is illuminated, the motor is set to Speed 1. If two Green LED’s are illuminated then the motor is set to speed 2 and three Green LED’s for speed 3. And Four Green LED’s for speed 4. Push the button marked on the Electronic clutch control panel to cycle through the Four speed settings and select the correct one for your specific application.
Reverse Auto-stop function Better for wood drilling.
Firstly, the tools are driven at low speed and the speed will increase to maximum once Impact function activated Better for thin iron plate drilling.
The tool is driven at low speed and will auto stop once drilling is finished
Better for thick iron plate drilling.
The tool is driven at highest speed, this function is usefull to prevent screw from breaking.

www.ronixtools.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>