SEALEY WL483D.V2 Bench Mounting Magnifying Worklight Instruction Manual

: June 12, 2024
: SEALEY

Table of Contents

SEALEY WL483D.V2 Bench Mounting Magnifying Worklight
SAFETY
INTRODUCTION
SPECIFICATION
OPERATION
WEEE REGULATIONS
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEALEY WL483D.V2 Bench Mounting Magnifying Worklight

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

ELECTRICAL SAFETY

WARNING! It is the user’s responsibility to check the following:
You must check the Power Adaptor to ensure that it is safe before using it.
You must ensure the risk of electric shock is minimized by the installation of appropriate safety devices. An RCCB (Residual Current
Circuit Breaker) should be incorporated in the main distribution board.
We recommend that an RCD (Residual Current Device) is used with all electrical products. It is particularly important to use an RCD with portable products that plug into an electrical supply not protected by an RCCB. If in doubt consult a qualified electrician.
You can obtain a Residual Current Device through your Sealey stockist. You must read and understand instructions concerning electrical safety.
The Electricity At Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified person, using a Portable Appliance Tester (PAT), at least once a year.
The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of the appliance and the safety of the appliance operator. If in any doubt about electrical safety, contact a qualified electrician.
Ensure that the insulation on all cables and the product itself is safe before connecting to the main power supply.
Ensure that cables are always protected against short circuits and overload.

INTRODUCTION

Powerful 3 dioptres 120mm precision lens gives high-quality magnifying capabilities. Features 12W SMD LEDs to illuminate the object for improved detailed work. Multi-position swing arm allows simple positioning of the lamp to suit the task. Features a G-clamp base to secure to a workbench or table. Ideal for electrical engineers, engravers, and fine detail work. Supplied with BS power adapter.

SPECIFICATION

Model No :……………………………………………………WL483D.V2
LED Type ………………………………………………………………SMD
Supply: …………………………..12V DC Transformer 230V~50Hz

OPERATION

MOUNTING

Fix the clamp to a secure surface. See Fig. 1.
Lower the work light assembly into the clamp, and use two hands to prevent the lamp from moving during this operation.
Turn on/off using the switch on top. See Fig. 2.
Adjust by loosening/tightening the head clamp. See Fig. 3.
NOTE: Be aware of the effect of using the lamp close to the window/door where it could be in direct sunlight.
Connect the Power adapter lead to the flying lead at the base of the unit.
Remember to close the lid on top whilst it is not in use.

WEEE REGULATIONS

Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to the recycling center, and disposed of in a manner that is compatible with the environment. When the product becomes completelyunserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team at technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.