KES Vacuum Cleaners US9 Instruction Manual

: June 6, 2024
: KES

Table of Contents

Introduction
General Information
EC Declaration of Conformity
IMPORTANT SAFETY
Technical Specifications
Machine Components
Read User Manual Online (PDF format)
Download This Manual (PDF format)

US 9
Instruction Manual
(Translation of the Original Version)

KES Vacuum Cleaners US9 -FIGURE

Introduction

This manual is furnished with each new model. It provides necessary operation and maintenance instructions and replacement parts information.

Read all instructions before using this machine.
Intended Use

This battery-powered push sweeper is intended for commercial use, for example in buildings, warehouses, parking lots, and sidewalks. It is designed for indoor and outdoor use and is suitable for picking up dry, nonflammable dust and debris on dry hard floor and carpet surfaces. It is not suitable for wet surfaces or for picking up flammable or hazardous materials.

General Information

This machine will provide excellent service. However, the best results will be obtained at minimum costs if:

The machine is operated with reasonable care.
The machine is maintained regularly – per the machine maintenance instructions provided.
The machine is maintained with manufacturer-supplied or equivalent parts.

Protect the Environment
Please dispose of packaging materials and used machine components in an environmentally safe way according to local waste disposal regulations.
Always remember to recycle.

Machine Data
Please fill it out at the time of installation for future reference.
Model No. – __
Serial No. – __
Installation Date – _____

EC Declaration of Conformity

According to the EC Machinery Directive 2006/42/EC, Annex II 1.A

We hereby declare that the machine designated below complies with the essential safety and health requirements of the EC Machinery Directive in its design and construction and in the version marketed by us.
Mister Kai Stolzenberg – Management of Stolzenberg GmbH & Co. KG, Hamburger Stralle 15-17, 49124 Georgsmanenhutte – be authorized to compile the technical documentation

Manufacturer| Stolzenberg GmbH & Co KG
Hamburger StrafSe 15-17
D-49124 Georgsmanenhutte
---|---
Description of the machine| Suction Sweeper with Tandem-Roller-System
Machine type| US 9
Applicable EC Directives| 2006/42/EG
2014/30/EU
2000/14/EG
The following standards.
in particular, were applied| DIN EN 60335-1
DIN EN 60335-2-69
DIN EN 60335-2-72
Georgsmarienhutte, 07 10 2020|
Kai Stolzenberg (GeschaftsfOhrer)

Specifications and parts are subject to change without notice.

IMPORTANT SAFETY

INSTRUCTIONS (SAVE THESE INSTRUCTIONS)

This symbol warns the operator of hazards and unsafe practices which could result in severe personal injury or death.
WARNING: To Reduce the Risk of Fire, Explosion, Electric Shock, or Injury:

– Do not use near flammable liquids, vapors, or combustible dust.
The machine is not equipped with explosion-proof motors. The electric motors will spark upon start-up and during operation which could cause a flash fire or explosion if the machine is used in an area where flammable vapors/liquids or combustible dust are present.
– Do Not Pick Up Flammable or Toxic Materials and Burning Debris.
– Batteries Emit Hydrogen gas. Keep Sparks and Open Flame Away When Charging Batteries.
– Charge batteries in a well-ventilated area.
– Disconnect Battery Cable and Charger Cord Before Servicing.
– Do Not Charge Batteries with Damaged Cord. Do Not Modify Plug.
– Do Not Use On Wet Surfaces. Stored Indoors.
The following safety precautions signal potentially dangerous conditions to the operator or equipment.

FOR SAFETY:

Do not operate the machine:
– Unless trained and authorized.
– Unless the operator manual is read and understood.
– Unless mentally and physically capable of following machine instructions.
– In areas that are too dark to safely see the controls or operate the machine.
– If not in proper operating condition.
– Without hopper and/or filter in place.
Before operating machine:
– Make sure all safety devices are in place and operate properly.
When operating machine:
– Use only as described in the manual.
– Do not pick up objects such as cords, strings, wires that may entangle brush.
– Report machine damage or faulty operation immediately.
– Do not leave unattended or on an unlevel surface.
– Do not allow children to play on or around machines.
– Keep children and unauthorized persons away from machines when in use.
– Go slow on slippery surfaces.
– Do not operate on inclines that exceed 2 %.
– Do not use machines to transport people or objects.
– Wear a dust mask, protective glasses, and gloves in dusty environments.
– Keep hands away from spinning brush.
– Use caution when lifting the full hopper to avoid back strain.
– Wear heavy gloves when removing sharp objects from the hopper.
– Turn the machine power off if the brush becomes obstructed or the machine malfunctions.
Before leaving or servicing machine:
– Stop on a level surface.
– Turn the machine power off and remove the key.
When servicing machine:
– Turn the machine power off and remove the key.
– Disconnect battery cable and charger cord before working on the machine.
– Wear protective gloves and glasses when handling batteries or battery cables.
– Avoid contact with battery acid.
– Use manufacturer-supplied or approved replacement parts.
– All repairs must be performed by a qualified service person.
– Avoid moving parts. Do not wear loose clothing or jewelry and secure long hair.
– Do not power spray or hose off machine near electrical components.
– Do not modify the machine from its original design.
– Drive wheels off ground during the test after drive belt adjustment.
– All work must be done having enough visibility and/or appropriate lighting.
– Wear personal protective equipment as needed.
When transporting machine:
– Turn the machine power off and remove the key.
– Get assistance when lifting machines.
– Use a loading ramp that will support the weight of the machine.
– Do not wheel up or downstairs.
– Use tie-down straps to secure the machine when transporting by vehicle.

Onboard Battery Charger Information
The onboard battery charger’s charging profile is specifically configured for a 12V sealed GEL battery.
When installing a replacement battery it is important to use the same battery type or damage to the battery and/or charger may result.
For battery charger operating instructions, refer to the battery charger manual supplied with the machine.

Technical Specifications

Model	US 9
Length	1085 mm / 43 in
Width	799 mm / 31 in
Height	658 mm / 26 in
Weight	137 kg / 300 lb
Sweeping Path Width	900 mm / 35 in
Main Brush Width	500 mm / 20 in
Side Brush Diameter	354 mm / 14 in
Hopper Capacity	60 L / 15.9 Gal
Battery Capacity	12 V, 105 Ah (C5), 120Ah (C20)
Total Power Consumption	12 VDC, 590 W, 34.3 A
Battery Charger	100-240VAC 10A
Productivity Rate (Net)	3150 m2/hr / 23620 ft2/hr
Slope Maximum	2%
Machine Vibration at Hand-arm *	<2.5m/s2
Machine Vibration Uncertainty K *	0.8 m/s’
Sound Pressure Level 1_,A *	62 dBA
Sound Uncertainty KpA *	3 dBA
Sound Power Level LWA + Uncertainly KWA *	81 dB(A)
Protection Grade	IPX3
Operation Temperature	min. -15°C, max. 40°C