Staples UN59460 FlexFit Hyken Mesh Chair Installation Guide
- June 6, 2024
- Staples
Table of Contents
Hyken Chair
UN59460 | UN59462 | UN59464
UN59460V | UN59462V | UN59464V
ASSEMBLY GUIDE
Hyker chair
Easy assembly.
Union & ScaleTM is leading the way in taking some of the stress and frustration out of furniture assembly.
More logical instructions. No more “huh?” moments — we develop our instructions to have the right amount of detail you’ll need for easy assembly.
We’re here to help. If you’re confused during any step of the process, just call the number located at the bottom of the instructions pages. You’ll get help from a friendly representative.
Need help with assembly?
Questions?
Call our Product Support experts
8:00 am8:00 pm, Eastern Time
1-800-270-9557
Furniture that works for you.
Your business has its own unique personality.
At Union & ScaleTM, we’ll help bring it to life through furniture and décor that looks great and connects perfectly with you and your team.
Union & ScaleTM provides solutions that enable people and organizations to perform at their best.
We stand behind our products and materials. If for any reason a Union & ScaleTM product does not meet the performance expectations, please contact us at 1-800-270-9557.
Sit down on the job in custom comfort.
No two people are alike. But no matter what your body is built like, there’s
one chair that’s built for everyone’s comfort – a Union & Scale chair! Take a
look at the diagram below. It’s packed with features that make it easy to
fine-tune the comfort to meet your unique needs.
Product Features
Seat Height Adjustment
Seat height adjusts to assure correct posture and relieves stress on back,
thighs and legs.| | Lumbar Support Adjustment
Added cushioning in chair back provides maximum support to lower back.|
---|---|---|---
Upright Seat Tilt Lock
Simple locking mechanism fixes seat in upright position to assure healthy
posture.| | Arm Height Adjustment
Arms adjust up and down or swivel to ease pressure on neck and support
shoulders.|
Tilt Tension
Easy adjustment of chair flexibility avoids heavy pushing and relaxes
muscles.|
Features Instructions
Seat Height Adjustment
• To raise the seat: lean slightly forward while seated to relieve the
pressure on the tilt mechanism.
• Reach under the right side of the chair and locate the handle.
Raise yourself up slightly to allow the chair to reach your desired height.
• To lower the seat: remain seated and lift the handle upwards until the chair
lowers to your desired height.|
---|---
Variable Position Tilt Lock
• Pull up on the handle located underneath the left side of the seat.
• Adjust the back to your desired angel, then push the handle down
• to lock the back into position.|
Tilt Tension
• Grasp the round cylinder knob under the front center of the seat.
• For firmer/stiffer-turn chockwise.
• For softer/looser – turn counter clockwise.|
Lumbar Support Adjustment
• Slide the lumbar support up or down to the desired location.|
Headrest Angle Adjustment
• The headrest rotates forward and back by 15 degrees.
• Hold the headrest and rotate forward or back to desired angle.
• The headrest raises and lowers hold the back of the chair and lift the
headrest up to raise; push down to lower.|
Arm Height Adjustment
• Press the buttons on the chair arms to allow the arms to move up or down
freely.
• Release the buttons once the desired height is reached.|
Included Parts
Tools Provided
Chair bolts, screws and knobs may loosen during use. Please tighten your
chair’s hardware each month.
Each piece of hardware needed for each step is located in the corresponding
segment in your Easy Parts Pack.
1
|
---|---
**2
|
3
|
4
|
5
|
6
|
To secure seat into base, sit down on chair. See easy adjustment
instructions to ensure custom comfort.**
Behold, the finished product.
Warranty
Worklife Brands warrants to the original purchaser of this Union & ScaleTM
Chair against defects in design, assembly, material, or workmanship for 7
years from the original date of purchase. In the event of a defect in the
design, assembly, materials or workmanship of this product within 7 years from
the original date of purchase, Worklife Brands will replace any such defective
part. Parts included under this warranty are non-moving metal components,
chair frame, pneumatic cylinder, upholstery and all other parts. To claim your
replacement parts, contact product support at
1-800-270-9557. Original receipt or
proof of purchase is required to obtain replacement parts. This warranty is
based on up to 3-5 hours of continual use within a 24-hour period for users
weighing up to 275 lbs. (124 kgs).
Claims under this limited warranty or any implied warranty shall be limited to
replacement of 100% of the chair or refund of purchase price at Worklife
Brands’ sole option.
This warranty does not apply to normal wear or damage from misuse, abuse,
improper storage or handling, installation, accident, repair or alteration or
other circumstances not directly attributable to manufacturing or material
defects.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN,
EXPRESS OR IMPLIED. STAPLES SPECIFICALLY DISCLAIM ANY AND ALL IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL STAPLES BE LIABLE FOR ANY
INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES
(SUCH AS BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS,
DATA OR RECORDS) RELATED TO THIS PRODUCT.
This warranty gives you specific legal rights, and you may also have other
rights that vary depending upon the state, province, territory or country.
Some states, provinces and territories do not allow the exclusion or
limitation of incidental or consequential damages or limitation on how long an
implied warranty lasts.
Except as stated herein, no other warranties shall apply.
Product Support 1-800-270-9557
UNION & SCALE™
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>