Reset Tempur-Pedic Remote: Ease 3.0 Remote Pairing Instructions
- June 6, 2024
- TEMPUR-PEDIC
Table of Contents
The Tempur-Pedic Ease 3.0 Remote Pairing Instructions provide an easy-to- follow guide to pairing your remote with your adjustable base. It is important to read the instructions carefully before attempting the pairing, as Step 2 is time-sensitive. The instructions include steps to reset your remote, test all remote functions, and troubleshoot common issues. The FAQ section provides answers to frequently asked questions, such as how to disable the child lock, reset the remote, and sync Tempurpedic bases. The page includes a video tutorial for visual learners. If you encounter any issues with your remote or adjustable base, customer service is available for assistance. By following these instructions, you can enjoy the full functionality of your Tempur-Pedic adjustable base with ease.
Tempur-Pedic Ease 3.0 Remote Pairing
Tempur-Pedic Ease 3.0 Remote Pairing
Pair Your Remote with Your Adjustable Base
Instructions for Ease 3.0 models
Please read the following steps before attempting the pairing because Step 2
is time-sensitive.
Step 1
Remove the rear cover of the remote control by sliding it down to expose the
PAIR button. Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug the Power Cord back into your power outlet.
Perform Step 2 within 10 seconds
Step 2
Press and hold the PAIR button on the back of the remote. The PAIR button will
illuminate and start to flash. When the PAIR button stops flashing, the LED
light on the control box will stop flashing. Release the PAIR button.
Step 3
Test all remote functions. If the remote buttons do not impact the adjustable
base movements, please repeat the process again or try the steps to Disable
the Child Lock because the remote may lock.
SPECIFICATION
| Product Specifications | Description |
|---|---|
| Product Name | Tempur-Pedic Ease 3.0 Remote |
| Compatibility | Adjustable base |
| Functions | Remote control for adjustable base movements |
| Resetting | Press and hold FLAT and STOP buttons simultaneously for 10-15 |
seconds
Pairing| Remove rear cover of remote, unplug power cord, wait 1 minute, plug
power cord back in, press and hold PAIR button, test all remote functions
Child Lock| Press and hold FOOT UP and FOOT DOWN buttons together for
approximately three (3) seconds to disable
Customer Service| Available for assistance at
1-800-821-6621 or visit
www.tempurpedic.com/support
Universal Remote Compatibility| Not compatible
Video Tutorial| Available on the product page
Frequently Asked Questions
Can I use the remote to make my adjustable base go to sleep?
Yes. Press the “Sleep” button on the remote. The adjustable base will go into the Sleep mode and will stop moving. To wake up the adjustable base, press any button on the remote.
Can I use the remote to make my adjustable base move faster?
Yes. Press and hold the “Speed” button on the remote for 2 seconds. The adjustable base will move faster and continue to move faster until you press and hold the “Speed” button again for 2 seconds. No, you cannot use a universal remote with your Tempur-Pedic adjustable base.
Can I use my adjustable base without a remote?
No, you must have a functioning remote control to operate your adjustable base. If your remote is not working, please contact customer service for assistance at 1-800-821-6621 or visit www.tempurpedic.com/support
How do I reset my Tempurpedic ease remote?
Press and hold the FLAT and STOP buttons simultaneously on the remote control for 10-15 seconds
Why is my Tempurpedic remote not working?
If you are having issues with your remote, check the following: Ensure that your remote batteries are properly installed or do not need replacing. Ensure Child Lock feature is not enabled.
How do you unlock ease remote?
To disable child lock: Press and hold the FOOT UP and FOOT DOWN buttons together for approximately three (3) seconds. The remote backlight will flash twice. When the backlight goes away the remote is no longer in Child Lock. The remote and adjustable base will work normally.
Why is my adjustable bed Tempurpedic remote not working?
Check under the bed base to verify that the wired connections are secure and that there are no cords or bedding obstructing the movement of the base. Check to ensure the green LED light is illuminated on the control box. If there is no light, verify that the input and power cords are properly connected
How do I Reset my Ease Adjustable remote?
We got power here so we’re looking good like anything what you gotta do is unplug it and remove the power for about a minute. And let it reset.
How do I pair my 3.0 ease controller?
Instructions for Ease 3.0 models:
Remove the rear cover of the remote control by sliding it down to expose the
PAIR button. Unplug the Power Cord from your power outlet.
Press and hold the PAIR button on the back of the remote. The PAIR button will
illuminate and start to flash.
Test all remote functions.
How Do You Sync Tempurpedic bases?
Until you hear a double click from the base. Now. Press the stop button finally reconnect the second temper Urgo premier to a working outlet and perform a system reset to reset the system to a zero.
Is there an APP for Adjustable bed remote?
It’s pretty easy to do you will need to have downloaded the personal comfort app please visit the app store or google play to download it for free. Then open the app and begin the pairing.
How Do I pair my Remote to my Bed?
In order to sink your remote to your adjustable bed. You’re first going to want to pull the back of the remote. Off on the back you will find one end of the pair.
Can I use a universal remote with my Tempur-Pedic adjustable base?
No, you cannot use a universal remote with your Tempur-Pedic adjustable base.
VIDEO
Tempur-Pedic Ease 3.0 Remote Pairing
www.tempurpedic.com/call-center/wireless-remote-
control/v/3915/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>