FOSCAM F41 Floodlight Camera User Guide

Floodlight Camera
Quick Setup Guide
http://www.foscam.com/d

What’s in the Box

Installation Example Diagram

Add Device: Connection via the Foscam App (Recommended)

It is strongly recommended that you complete the “add devices” process on the Foscam app before the Floodlight hardware is installed.
Before You Get Started
Scan the QR code below to download and install the Foscam APP.

To ensure a smoother video experience on your smartphone, it is recommended that your smartphone meet the following specifcations:

• iOS: version 11 or higher.
• Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU).

Note: For the best experience, please update the APP to the latest version!

WiFi connection

1. Plugin the power and wait for a few seconds until hearing the “Ready for WiFi configuration”.
   Tips: If you didn’t hear the voice prompt, open the port cover on the back of the camera. Press and hold the Reset button for about 10 seconds to reset the camera.

2. Make sure that your smartphone is connected to your WiFi router.
   Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks, so you can choose the channel with the stronger signal to use. For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.

3. Open the foam APP and please sign up for a Foscam account, or sign in if you have one already.

4. After logging into the Foscam APP, select the “Tap to add a camera” or “+” icon on the upper right corner, then select “Scan the QR code” and scan the QR code that is labeled at the bottom of your camera.

5. In “Add Device”, if you hear “Hello Foscam”, select the checkbox and tap ”Next”, continue to confirm that the device is in the blue fashing state, and tap ”Next”. In “WiFi connection”, enter your WiFi password and tap “Confirm”, (see illustrations on the next page).
   

6. Please scan the QR code on the phone screen with the camera, then you will hear a voice prompt say ”WiFi connecting”. Select the checkbox and tap ”Next”.
   Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in) away, and if you encounter difficulties you can try to move the screen slowly around 10 – 15cm (3.94 – 5.9in).

7. Wait a few seconds until the camera notifies you that the “Wireless connection succeeded”, which means your camera has connected to your WiFi successfully. After, you can set the camera name and tap “Save” in the “Set name” interface.
   Note: If the process of adding a camera fails, please reset your camera and try adding again according to the above method. Open the port cover on the back of the camera. Press and hold the Reset button for 10 seconds.

8. Tapping on the play button in the video box will jump to the “Camera Login” setting interface.
   For your security, please set a new username and password for your camera before viewing live video.
   

9. After completing the above steps, you can begin using your camera.

Floodlight Installation

Getting Started

Note: Make sure you have installed the Foscam App, and have scanned the camera QR code, and completed the “add device” process in the app before beginning the hardware installation process.
This unit is designed to be mounted on a standard wiring junction box and requires connection to a 100 ~ 240VAC power supply. For optimum results, it is suggested that the installation height of the product should be 8.2ft (2.5m) and the camera should be tilted 15° downward.

1. Shut the power off at the breaker in your house. Switch on/of the lights to make sure the electricity in your house is properly shut off.
   Note: Risk of shock, disconnect power before servicing. Contains no user- serviceable parts. This product must be installed by a licensed electrician in some countries. Check local regulations.

2. Access the area you want to be lit and the area you need camera coverage, and install your Floodlight Camera on the front wall or on the sidewall. The sidewall is highly recommended to get optimal coverage for the floodlight and camera.

• The motion sensor is more sensitive to the movements across the camera field of view than movements towards or away from the sensor. We highly recommend you install the floodlight camera on the sidewall.
  For the best product experience, we suggested installation height of Spotlight camera: 2.5m (8.2 feet), camera downward tilt angle 15°.
  

Installing the Junction Box

1. Remove the old Floodlight from the junction box and install the mounting plate to the junction box.
   Tip: The junction box and existing electrical wires are required for Floodlight Camera installation.
   The concaved side of the mounting plate must face outwards.

2. Peel the backing of the adhesive foam gasket and stick it to the back of the floodlight unit.
   

Hang Floodlight Camera

1. Hang Floodlight Camera on the junction box with the hook provided.
   

2. Connect both ground wires(yellow or green ) from the junction box and Floodlight Camera, join the wires by using a wire nut. If the existing ground wire has been connected to the junction box or there’s no ground wire, connect the ground wire of the Floodlight Camera to the junction box or mounting plate directly.
   

3. Use wire nuts to connect Floodlight Camera wires to the rest of the wires from the junction box. Connect the white wire on the Floodlight Camera to the white wire(neutral) from the junction box. Connect the black wire on the Floodlight Camera to the black wire(hot) from the junction box.

Mount Floodlight Camera On the Junction Box

1. Align the hole on the junction box with the opening in the Floodlight Camera.

2. Screw the central screw through the center of the Floodlight Camera to mount it in position.
   

3. Cover the central screw with the central screw cap to prevent it from rusting.

Adjusting Floodlight Camera

1. After installation is complete, loosen the adjustment screws on the camera and floodlight to adjust the camera and light position to the desired angles.
2. Tighten the screws firmly to complete the installation.

Other Ways to Access Your Camera

Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like to manage multiple cameras, we suggest you install Foscam VMS. You can download the “Foscam VMS ” Windows version from foscam.com/vms and can download the “Foscam VMS” Mac version from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the latest version!

Add the IP Camera

1. Run Foscam VMS, then create a local administrator account and login.
2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your camera.

Please visit foscam.com/downloads to view the user manual and for additional detailed steps.

Important Notice

Camera Username & Password
The camera username & password are used to access and manage your camera. Having a strong password can significantly improve the security of your camera.
If you have forgotten either of them, please press the “Reset” button and hold it for more than 10 seconds while the camera is powered on. After hearing the voice prompt, release the button. The doorbell will automatically reboot and the default settings will be restored.
You can then reconnect the camera by following this Quick Setup Guide.
Foscam Cloud Service Account Username & Password
Your Foscam Cloud service account and password may be used to access both the Foscam App and the Foscam Cloud service website. Therefore, you can register your account username & password on either one.

storage media
Your camera supports cloud, NVR (Network Video Recorder), and Micro SD card (only supports FAT-32 format) storage formats. If you wish to record and playback large amounts of video, we recommend using a Foscam NVR device as well.
Firmware Upgrades
You can upgrade the firmware of your camera with the Foscam App by using the new “One-Key-Online Upgrade” feature (Open the Foscam App and log in to the camera, select “Settings” > “Firmware Upgrade”).
You also can download the latest version to upgrade your camera from our official website foscam.com/upgrades.

Safety Tips

• Please ensure that the proper power supply is used before using the camera.
• Please install the camera and bracket securely using the screws provided.
• Please use this product within the temperature range -4°F~122°F (-20°C~50°C). When the ambient temperature is too high or too low, it may cause product failure.
• To avoid the risk of fire or electric shock, please keep your camera in a cool, dry place.
• Please keep the camera out of reach of small children.
• This product is not a toy; children should use the product under adult supervision.
• Change your default port to a greater range to help ensure the safety of your connection. How to change the default port: please visit foscam.com/downloads to view the user manual.
• Check the logs of your Foscam camera frequently. Foscam cameras have embedded logs telling you which IP addresses are accessing the camera.
• The foodlight source of this luminaire is not replaceable; when the floodlight source reaches its end of life the whole luminaire shall be replaced.

Product Performance

WLAN frequency range: 2412MHz – 2472MHz and 5725MHz – 5850MHz
Maximum transmission power (2.4GHz) : < 19dBm
Maximum transmission power (5GHz): < 14dBm
Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz)
Power Supply: AC 100 – 240V ~ 50/60 Hz

Technical Support

If you have problems with your Foscam device, please contact the reseller you purchased from, or you can e-mail the company headquarters technical support team: support@foscam.com
Your valuable comments and suggestions on improving Foscam products are welcomed!

https://www.foscam.com/faqs/index.html
http://www.foscam.com/d
https://www.youtube.com/watch?v=poRX4E0ZlK0&feature=emb_logo

CE Certificate statement Website:
https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public:
https://www.foscam.com/company/open-information.html
Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd
Addr: Room 901-902, Building 1B, Xingke 1st Street, Shenzhen International Innovation
Valley, Nanshan Dist., Shenzhen, 518055, China
www.foscam.com
Support email: support@foscam.com

Due to product upgrades and other reasons, this guide may be slow to update, resulting in slight inconsistencies with the official website information. Please take the official website (www.foscam.com) information as the current standard.

References

• Foscam Support - FAQs
• Foscam Support - FAQs
• Foscam Official Website - Security Cameras, NVRs, Baby Monitors, IP Cameras, NVR Kits, Security Kit, Pet Monitors, Cloud Storage Service
• Foscam Open-Information System

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>