ZYF Z10 Anti Lost Smart Remote Control User Manual

ZYF Z10 Anti Lost Smart Remote Control User Manual

Switch to the red character function and the Fn indicator lights up; Press again to switch back to the default function, the Fn indicator goes out.

Quickly enter www. and. com characters

Pairing method

The remote control and USB receiver are already paired at the factory, so the receiver can be used directly after plugging it in If the remote control and the receiver cannot be paired due to mis operation or other reasons during use, you can connect by the following methods:

Infrared Function and Machine Learning

Principle: when the air mouse remote control is not connected to the USB receiver, the front buttons are infrared (except for [Air mouse] [Voice] [Light] button). It is 2. 4G transmission once remote control connect with the USB receiver. [Power] button keeps the infrared signal sending.

a. Press and hold the [OK]+ [Power] button at the same time for around 3 seconds, the indicator light will change from dim to bright, then release both buttons.
b. Press the button need to ‘learn’, the indicator light flashes, waiting for the machine learning signal;
c. Place the original remote control at and the air mouse on the desk, head to head (the distance between them is about 10cm). Press the button you want to learn for about 3 seconds; after the learning is successful, the indicator light flashes 3 times and will stay on. Repeat steps b-c continuously for multiple buttons learning process.
d. Press the [Air Mouse] button to exit the learning mode and save the learning data.

Turn-over prohibition

For prevention of mistakenly pressing the button, only face-up buttons are function, face-down buttons’ function are disable.

Sleep and Wake Up Feature

The remote control goes into sleep mode after 15 seconds standby without using. The blue indicator light goes off. Press any button to wake up the remote control.

Cursor Locking Function

Press [Air mouse] button to tum on the air mouse function, the blue indicator light will stay on. Under the air mouse mode, the cursor moves in the same direction as the remote control. [Confirm] button will be the left click for the air mouse. Press the [Air Mouse] button to turn on/off the function of the air mouse, blue indication light will go off once the control turn off.

CPI Adjustment

CPI (Count Per Inch). Speed of the Mouse Cursor Adjustment (4 Levels), 1, 2, 3, 4 Level. The higher the level, the faster the speed. The default speed is set at level 2.

1,Speed Increase:
Press and hold the [OK] button + [Volume+] button together for 3 seconds, once the blue indicator flashes twice, release both buttons, CPI will increase one level.
2,Speed Decrease:
Press and hold the [OK] button + [Volume-] button together for 3 seconds, once the blue indicator flashes twice, release both buttons, CPI will decrease one level.

Anti-lost function

When you cannot find the remote control, you can press the button on the receiver and the remote will make a beep sound for one minute, so that you can find the remote easily.

Please pay attention when you using the anti-lost function

1. The USB receiver must plug into a power on device (such as PC/TV).
2. If no respond from the remote control, the distance might exceed over 10 meters signal range or the remote control run out power.

Touchpad function

Controlled by gestures on the touchpad

Indicator light description

Reset to Factory Settings

Press [OK]+ [Left] together until the indicator flashes, then release the button.

Charging Cable

Specifications

wireless modulation method: GFSK
Modulation frequency: 2.4-2.4835GHz
Working temperature:-20°C-65°C
Battery type: 500mAh/3.7V lithium battery
Machine power consumption: 63mA
Standby power consumption: 58uA
Number of buttons: 61 keys
Remote control distance: 8-1 Meters
Charging port : Micro USB
Dimensions: 192.2X53.2X 16.BMM
Product net weight : 162.9±5g
Support system : Android\Windows\Mac OS\Linux

Note

■ This product uses a built-in lithium battery and the input voltage is 5V when charging.
■ If the remote control is not used for a long time or the battery is low, please fully charge it before using it.
■ Use the specified USB cable to charge the remote control, overcharging will shorten the battery life.
■ Avoid use in hot or cold environments, which will shorten the battery life.
■ Keep this product away from liquids, such as water.
■ Pictures for reference only, the actual product shall govern.

Package contains

1. Remote control x 1
2. USB Receiver x 1
3. USB charging cable x 1
4. Instruction Manual x 1

THANKS FOR READING
Manufacture in China R&D in USA
For more information: www.zyftech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>