MOZA M16 NANO-SE Black Gimbal Selfie Stick User Manual

June 6, 2024
Moza

MOZA LOGO NANO-SE
User Manual

MOZA M16 NANO-SE Black Gimbal Selfie Stick

NANO SE Overview

  1. MOZA M16 NANO-SE Black Gimbal Selfie Stick-OverviewPhone Holder Lock

  2. Bluetooth Indicator

  3. Battery Indicator

  4. Power Button

  5. Knob

  6. Telescopic Rod

  7. Remote Controller

  8. Bracket

  9. Tripod

  10. M Button (Top Button)

  11. Remote Controller Indicator

  12. Button (Left Button)

  13. +Button (Right Button)

  14. Record Button (Down Button)

Preparation

  1. App download
    MOZA NANO SE, in conjunction with the MOZA Genie App, displays high-definition images in real-time on your device, recording, shooting, gimbal settings, using advanced features such as Magic mode, time-lapse photography, and more.
    Scan the QR code below or search and download “MOZA Genie” in the app store.MOZA M16 NANO-SE Black Gimbal Selfie Stick-App
downloadhttp://global.backend.gudsen.vip/api/app/download?p=6281
    Note
    System requirements: iOS 10.0 or later, Android 6.0 or later
    iOS users: scan the QR code to download or download on the App store
    Android users: download in Google Play

  2. Tutorial
    Access video tutorials on MOZA official YouTube channel.
    https://www.youtube.com/channel/UCHBIF5mblt4W0iPRKzU6qPA
    Hotline: 0016467400973
    Technical Support: support@gudsen.com

MOZA M16 NANO-SE Black Gimbal Selfie Stick-Follow us

http://l.ead.me/baxQX4

Notes:

  1. Before using the NANO SE for the first time, charge the product fully.
    Disconnect the product from the charger after charging is completed.

  2. Put the phone holder in the unlocked position and install the phone to NANO SE before turning it on.

  3. If the battery indicator shows only 1 bar, it means the battery is too low, charge the unit as soon as possible.

  4. NANO SE is not waterproof. Please do not expose NANO SE to any liquids. Do not touch it with wet hands. Clean it with a soft dry cloth.

  5. When not in use for a long time, please turn off the NANO SE’s power supply, charge and discharge every 3 months to ensure the battery activity.

  6. If you do not use the product for more than 10 days, please discharge its battery to 40%-65% and store it to extend the battery life. To avoid core damage, do not store the battery for long periods of time after it has been completely discharged.

  7. NANO SE is a high-precision control device. Drops or blunt force trauma caused by external forces can damage the NANO  SE and cause functional issues.

  8. After the NANO SE is powered on, make sure that nothing is blocking its ability to rotate fully.

Unfold and Unlock NANO SE

Unfold NANO SE as shown, adjust the angle according to your shooting needs.MOZA M16 NANO-SE Black Gimbal Selfie Stick-
Unlock Turn the phone clip clockwise 90° to unlock the roll motor.

MOZA M16 NANO-SE Black Gimbal Selfie Stick-unlock the
roll

Install and Balance the Phone

In the NANO SE’s shutdown state, open the phone clip and install the phone. The phone clip should be near the middle of the phone. Then adjust the balance of the portrait and landscape, respectively. To maintain balance, adjust the position of the phone in the clip when switching between portrait and landscape shooting orientations.

MOZA M16 NANO-SE Black Gimbal Selfie Stick-Balance the
Phone

Attention

  1. Install the mobile phone before turning on the gimbal. The battery life of the NANO SE is affected by the balance of the mobile phone. If the phone is slightly unbalanced the gimbal may still be functional but movies will be less stabilized and more battery power will be required.
  2. The roll axis can rotate up to 270°, exceeding this limit may cause damage to the gimbal.
  3. NANO SE will vibrate slightly when the phone is not detected and will enter standby mode. After the mobile phone is installed, short press the power button to use it normally.
  4. The phone clip has been designed to prevent accidental clamping.

Buttons and Ports

Power Button:
Long press for 3s: Power On/Off, long-press the power button to turn on NANO SE. When the gimbal is turned on, long-press the power button again to turn it off.
Short press for 0.5s: Sleep Mode/Wake Up
Remote Control:
M Button (Top Button)
Click: Switch between horizontal and vertical shooting modes
Double click: Switch between Follow and Lock mode
Press and hold the M button (top button), then quickly triple-click the + button (right button): Reset Bluetooth
When the mobile phone cannot search NANO SE or Bluetooth connection is failed, NANO SE Bluetooth needs to be reset.
Button functions of the remote controller when connected with App or native camera

Button| Operation| Genie App Function| Native Camera Function
---|---|---|---
M Button
Top Button| Triple-click| Switch between front and rear camera| Switch between front and rear camera
Record Button Down Button| Click| Start/Stop Recording| Shooting/Recording

Double click| Shooting/Recording| Shooting/Recording
+ Button
(Right Button)| Click|
Magic Video: move to next mode| /
Hold| Zoom in|
Zoom in
Double click| Zoom in to the maximum| /
– Button
(Left Button)| Click| **Magic Video: move to previous mode Magic Photo: Shoot again| /
Hold| Zoom out| ***Zoom out
Double click| Zoom out to the minimum| /

Note:
When the native camera is in recording mode, the device will record movies. When the native camera is in photo mode, the device will take still photos.
Magic Video can only be used after NANO SE and Genie App are connected.
NANO SE only supports some mobile phones, please refer to the official website compatibility list or consult our after-sales service.
Remote Controller Indicator
The indicator will be illuminated when any button is pressed
Flashing: Pairing

Bluetooth Light
Off: Bluetooth is disconnected
Solid: Bluetooth connection is a success

Power Indicator
4 grids solid light:75%-100% battery level
3 grids solid light: 50%-70% battery level
2 grids solid light: 25%-50% battery level
1 grid solid light: 0%-25% battery level
Light flashes from bottom to top: charging, solid 4 grids light when fully charged

Upgrade Mode
Light flashes from top to bottom: NANO SE is in firmware upgrade mode

Note:
If the upgrade fails, NANO SE will remain in the upgrade mode, and the power indicator will flash alternately from bottom to top. Please restart MOZA Genie App and NANO SE. NANO SE will automatically enter the upgrade mode after restarting. Please re-upgrade the firmware after MOZA Genie App and NANO SE Bluetooth are connected.
Charging Port
NANO SE uses a universal USB-type C charging port, the recommended charging specification is 5V/1A, you need to use your own charger. NANO SE can use mobile phone chargers or a power bank to charge. The battery will automatically stop charging when fully charged, disconnect the charger when fully charged.

Angle Adjustment
If the folding part is loose, please tighten the knob.

Horizontal/Vertical Mode

When the gimbal is powered on, click the M button (top button) to switch between horizontal and vertical shooting.MOZA M16 NANO-SE Black Gimbal
Selfie Stick-Vertical Mode

Telescopic Rod

To extend the telescopic rod, pull upwards on the gray part as shown as below.MOZA M16 NANO-SE Black Gimbal Selfie Stick-Telescopic
Rod

Tripod

To open the tripod, push up on the telescopic rod, and place the tripod on a leveled surface.MOZA M16 NANO-SE Black Gimbal Selfie Stick-
Tripod

Adjust the tilt axis angle manually according to the need, if the folding part is loose, please tighten the knob.

Sleeping Mode

When NANO SE is powered on, manually turn the roll axis counterclockwise toward the built-in motor lock, NANO SE will automatically enter to sleep mode. Manually rotate the roll axis clockwise to unlock, and then press the power button for 0.5s to
wake up NANO SE. MOZA M16 NANO-SE Black Gimbal Selfie Stick-Sleeping
Mode

The icon indicates that the roll axis is turned into the built-in motor lock.

Working Mode

Lock Mode
After NANO SE is powered on, it defaults to Lock Mode, and the phone will remain level within the range of the motor’s movement, and will not follow the handle rotation.MOZA M16 NANO-SE Black Gimbal Selfie Stick-Lock
Mode

Follow Mode
To switch NANO SE from Lock Mode to Follow Mode, double-click the M button (Top button). In Follow Mode the phone will follow the handle rotations. Double-click the M button again to exit Follow Mode. MOZA M16 NANO-SE Black
Gimbal Selfie Stick-Follow Mode

Bluetooth Connection

MOZA Genie App connection
Turn on Location and Bluetooth on your mobile phone, launch the MOZA Genie App, click the flashing Bluetooth icon on the App interface, after searching for the NANO SE signal, click the corresponding Bluetooth icon of Hi-Nano-SE- 12BB4004XXXX in the device list to connect to the device. After the connection is successful, the NANO SE Bluetooth light will remain on.

Connecting the phone for native camera control
****Turn on Location and Bluetooth on your mobile phone, and select the Bluetooth settings menu. Search for NANO SE Bluetooth signal, click Hi-Nano- SE-12BB4004XXXX Bluetooth device and pair it (no password is required). After the connection is complete, the NANO SE Bluetooth light will remain on. Now you can control the native camera with the remote controller.

Bluetooth reset
When NANO SE cannot be found or if the connection fails, press and hold the mode button (top button), and quickly triple-click the + button (Right button) to reset NANO SE Bluetooth. After resetting, click the flashing Bluetooth icon on the MOZA Genie App interface to search for the device, then reconnect to NANO SE.

Introduction to MOZA Genie App

MOZA M16 NANO-SE Black Gimbal Selfie Stick-Genie App

1   Screen orientation lock
2 Screen resolution
3 Video frame rate
4 Focus and metering frame (click on the frame and drag up and down on the

screen  to adjust the exposure
5| Magic Video (only displayed after connecting to NANO SE)/ Magic Photo
6| Filter
7| Switch between front and rear cameras
8| Record button
9| Gesture control
10| View photos
11| Automatic (Auto)/Pro (Pro) mode switching
12| | Frame ratio / auxiliary line / safe area
13| Zoom factor
14| Sleep mode (icon will only be displayed when NANO SE is in sleep mode)
15| Lock mode status (icon shows the gimbal is in locked mode; the gimbal is in follow mode)
16| Gimbal power display
17| Phone power display
18| App general settings
19| Clear the screen, do not display the parameters icon
20| NANO SE setting

Firmware Upgrade

  1. Turn on the MOZA NANO SE and connect it to the MOZA Genie App
  2. A prompt will appear in the upper left corner of the App interface when new firmware is available, click the yellow button in the upper left corner to upgrade the firmware.MOZA M16 NANO-SE Black Gimbal Selfie Stick-Firmware Upgrade

Also, you can click the NANO SE setting  and “Firmware Upgrade” in the menu to upgrade.

Notes:

  1. Check the battery level of NANO SE and make sure that at least two of the battery indicator lights are on before upgrading. After NANO SE is connected to MOZA Genie App, follow the above operations if the App prompts to upgrade the firmware.
  2. Do not exit the MOZA Genie App interface or transfer the App to the background operation or turn off the NANO SE when upgrading. Pay attention to the prompt information on the App interface. Restart the MOZA Genie App and NANO SE after the up-gradation is successful.
  3. If the upgrade fails, the NANO SE will remain in upgrade mode and the power light will flash from bottom to top. Restart MOZA Genie App and NANO SE, the NANO SE will automatically enter into upgrade mode. Reattempt to upgrade the firmware after connecting the Genie App and NANO SE.

Storage

Turn off the NANO SE and remove the smartphone, follow the instructions below to store the NANO SE.MOZA M16 NANO-SE Black Gimbal Selfie Stick-Storage
2

FAQs

The pairing of the remote controller and NANO SE
NANO SE has been paired with the remote controller before leaving the factory, the following operations are not required unless there is an issue during use.
Please contact MOZA after-sales service and complete the following steps to re-pair the remote controller and NANO SE, if none of the NANO SE buttons works after connecting with MOZA Genie App:
Press the menu button (top button) and record button (down button) at the same time until the remote controller indicator flashes, After the remote controller indicator flashes, all the battery indicator lights will flash. When the blinking stops, the pairing is complete.
The battery indicator flashes:
If the first battery light indicator (the light closest to the power button) flashes after powering on and the NANO SE motor is weak, attempt to upgrade the firmware. If the issue persists, contact MOZA after-sales service.

NANO SE Registration

In order to provide better service and experience, complete register your product the first time you connect the NANO SE to MOZA Genie App. Enter your email address in the dialog box and fill in the verification code in the email to complete the registration.
Attention:
If you do not receive the verification code email from MOZA:

  1. Ensure the email address you filled in is correct
    1.2 Ensure you are accessing to the email address provided in the registration interface
    1.3 Check your spam to make sure our email is not filtered as spam
    1.4 add support@gudsen.com and gudsen- services@gudsen.com to your email contact or trusted sender list, and request a new verification code

  2. How to receive a new verification code
    2.1 The registration interface can re-send the verification code manually every 60 seconds
    2.2 Ensure you’ve entered the latest verification code sent or generated, the old verification code cannot be verified

  3. If you have other questions, please contact MOZA after-sales service

Disclaimer

Thank you for purchasing the NANO SE. This document is related to your safety and legal rights and responsibilities.
Before using this product, please read this article carefully to ensure that the product has been set up correctly. Failure to follow the instructions and warnings in this article may cause injury to you and people around, and damage NANO SE or other surrounding objects.
The final interpretation right of this article and all related documents of NANO SE belongs to Shenzhen Gudsen Intelligent Technology Co., Ltd. (hereinafter referred to as “Gudsen Intelligent”). It is subject to update without notice. Please visit www.gudsen.com official website for the latest product information.
By using this product, you are deemed to have read, understood, endorsed, and accepted all the terms and content of this statement. You are solely responsible for the use of this product and the consequences thereof. You undertake to use this product for legitimate purposes and agree to the terms and any relevant regulations, policies, and guidelines formulated by  Gudsen Intelligent. Gudsen is not responsible for damage, injury or any legal problems caused by the direct or indirect use of this product. Users should follow all safety guidelines including but not limited to this document.

Safety Guidelines

Warning:

  1. Do not expose the product to any liquid, do not immerse the product in water or get it wet. Do not use the product in rain or humid environments. Corrosion may occur when the inside of the product is exposed to water, which may cause spontaneous combustion of the battery and may even cause an explosion.
  2. If the product catches fire, please use water, water mist, sand, fire blanket, dry powder, carbon dioxide fire extinguisher to extinguish the fire immediately. Select the fire extinguishing method in the above-recommended order according to the actual situation.
  3. Use the product in an environment where the temperature is between 0 ℃ and 40 ℃
  4. Do not disassemble the product in any way. If the battery is pierced during disassembly, it will cause the electrolyte inside the battery to leak and even cause fire or explosion.
  5. Do not hit, crush or throw the product. Do not place heavy objects on the product.
  6. Do not heat the product. Do not put the product in a microwave oven or pressure cooker.
  7. Do not put the product near a heat source (stove or heater, etc.) or leave the product in a car on a hot day. Do not store the product in an environment above 60°C. The ideal storage environment temperature is 22 ℃ to 28°C. The gimbal will not be able to resume use when exposed to these extreme temperatures.

Product Specifications

Payload 280g
Product Weight 250g
Size (LWHmm) Unfolded Size: without stick 60.748.6301

with stick 60.748.6690
Folded Size: 60.760.9171.4
Supported phone size| 60 ~ 88 mm
Tripod length| 94mm
Battery Life| *7(h)  (Eccentric installation)

*10(h) (Well balanced)

Charging interface| USB Type-C
Charging specification| 5V/1A DC
Bluetooth| 5.0 BLE
Battery specification| Standard voltage 3.7V
Battery capacity: 950mAh
Fastest charging time| *140 (min)
Remote control distance| 10m(Max)
Mechanical Range| Roll Axis: 270°
Tilt Axis: 180° (Manual adjustment)

**Notice: *** Laboratory environment test may change according to different use conditions

Gudsen logoShenzhen Gudsen Technology Co., Ltd
Web: www.gudsen.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals