ASUS VP32U Series LCD Monitor User Guide

VP32U Series LCD Monitor

VP32U Series
LCD Monitor
User Guide

First Edition April 2020
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. ii

Table of Contents
Notices…………………………………………………………………………………………… iv Safety Information …………………………………………………………………………… v Care & Cleaning ……………………………………………………………………………… vi Takeback Services…………………………………………………………………………. vii 1.1 Welcome! ………………………………………………………………………….. 1-1 1.2 Package Contents ……………………………………………………………… 1-1 1.3 Assembling the Monitor Base…………………………………………….. 1-2 1.4 Connect Cables …………………………………………………………………. 1-3
1.4.1 Rear of the LCD Monitor …………………………………………. 1-3 1.5 Monitor Introduction ………………………………………………………….. 1-4
1.5.1 Using the Control Buttons ……………………………………….. 1-4 2.1 Adjusting the Monitor ………………………………………………………… 2-1 2.2 Detaching the arm/stand (for wall mount) …………………………… 2-2 3.1 OSD (On-Screen Display) Menu………………………………………….. 3-1
3.1.1 How to Reconfigure ……………………………………………….. 3-1 3.1.2 OSD Function Introduction………………………………………. 3-2 3.2 Specifications …………………………………………………………………. 3-13 3.3 Troubleshooting (FAQ)………………………………………………………3-14 3.4 Supported Timing List ……………………………………………………… 3-15
iii

Notices
Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: · This device may not cause harmful interference, and · This device must accept any interference received including
interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003.
iv

Safety Information

· Before setting up the monitor, carefully read all the documentation that came with the package.
· To prevent fire or shock hazard, never expose the monitor to rain or moisture.
· Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
· If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
· Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
· Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
· The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
· Use the appropriate power plug which complies with your local power standard.
· Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
· Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
· Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
· Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
· To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC.
· The socket-outlet shall be installed near the equipment and shall be easily accessible.
· If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
· This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.

This symbol of the crossed out wheeled bin indicates that the product

(electrical, electronic equipment, and mercury-containing button cell battery)

should not be placed in municipal waste. Please check local regulations for

disposal of electronic products.

v

Care & Cleaning
· Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord.
· Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
· Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor: · The screen may flicker during the initial use due to the nature of the
fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. · You may find slightly uneven brightness on the screen depending on the desktop pattern you use. · When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. · When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to complete a task.
CAUTION: Information to prevent damage to the components when trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.
vi

Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.
vii

1.1 Welcome!
Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you!
1.2 Package Contents
Check your package for the following items:
LCD monitor Monitor Base Quick Start Guide Warranty Card Power Cord DisplayPort cable (optional) HDMI cable (optional)
· If any of the above items is damaged or missing, contact your retailer immediately.

1-1

Chapter 1: Product Introduction

1.3 Assembling the Monitor Base
1. Have the front of the monitor face down on a table. 2. Attach the base to the arm. 3. Turn the screw clockwise to secure the base. Then adjust the monitor
to the angle that is most comfortable for you.
· We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

ASUS LCD Monitor VP32U Series

1-2

1.4 Connect Cables
1.4.1 Rear of the LCD Monitor
HDMI
1. Power AC Input 2. HDMI Port 3. DisplayPort Port 4. Earphone jack

1-3

Chapter 1: Product Introduction

1.5 Monitor Introduction
1.5.1 Using the Control Buttons
Use the control button on the back of the monitor to adjust the image settings.
Menu Close Power Off Input Select Brightness

1. Power Indicator:

· The color definition of the power indicator is as the below table.

Status

Description

White

ON

Amber

Standby mode

OFF

OFF

2. Central button: · Press this button to enter the OSD menu. · Press this button to turn on the monitor when turned off.

3. Left key: · Exit the OSD menu or return to the previous layer.

4. Right key: · Power Off shortcut key. · Enter the option of the next layer.

5. Up key:
· Use this hotkey to Input Select. · Move the option upwards or increase the option value. 6. Down key: · Use this hotkey to Brightness.

· Move the option downwards or decrease the option value.

· Key Lock shortcut key. Press and hold it for 5 seconds to

enable/disable Keys Lock.

ASUS LCD Monitor VP32U Series

1-4

2.1 Adjusting the Monitor
· For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
· Hold the stand to prevent the monitor from falling while changing its angle.
· You can adjust the monitor’s angle from -5° to 8°.
-5 ~ 8
· It is normal that the monitor slightly shakes while you adjust the viewing angle.

2-1

Chapter 2: Setup

2.2 Detaching the arm/stand (for VESA wall mount)

The detachable stand of this monitor is specially designed for wall mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table.
2. Use a screwdriver to remove the two screws on the arm (Figure 1), and then detach the arm/stand from the monitor (Figure 2).
· We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
· Hold the stand of the monitor while removing the screws.

Figure 1

Figure 2

· The wall mount kit ( 100x 100 mm) is purchased separately.
· Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg (Screw size: M4 x 10 mm).

ASUS LCD Monitor VP32U Series

2-2

3.1 OSD (On-Screen Display) Menu
3.1.1 How to Reconfigure

Splendid
Standard Mode sRGB Mode Scenery mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

1. Press the MENU button to activate the OSD menu.
2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.
· 3. To select the highlighted item on the menu press the button.
4. Press the and buttons to select the desired parameter.
· 5. Press the button to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes.
· 6. Select the to return to previous menu or to accept and return to previous menu.

ASUS LCD Monitor VP32U Series

3-1

3.1.2 OSD Function Introduction
1. Splendid
This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.

Splendid

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

Standard Mode sRGB Mode Scenery mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode

· Standard Mode: This is the best choice for document editing with SPLENDIDTM Video Intelligence Technology.
· sRGB Mode: This is the best choice for viewing photos and graphics from PCs.
· Scenery mode: This is the best choice for scenery photo displaying with SPLENDIDTM Video Intelligence Technology.
· Theater Mode: This is the best choice for movie watching with SPLENDIDTM Video Intelligence Technology.
· Game Mode: This is the best choice for game playing with SPLENDIDTM Video Intelligence Technology.
· Night View Mode: This is the best choice for playing dark-scene game or watching dark-scene movie with SPLENDIDTM Video Intelligence Technology.
· Reading Mode: This is the best choice for book reading with SPLENDIDTM Video Intelligence Technology.
· Darkroom Mode: This is the best choice for a weak ambient light environment with SPLENDIDTM Video Intelligence Technology.
· In the Standard Mode, the Saturation, Skin Tone, Sharpness, and ASCR functions are not user-configurable
· In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness, Contrast, and ASCR functions are not user-configurable
· In the Reading Mode, the Saturation, SkinTone, ASCR, Contrast, and Color Temp. functions are not user-configurable

3-2

Chapter 3: General Instruction

2. Eye Care In this function, you can adjust settings to better protect your eyes.

Eye Care

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

Blue Light Filter Rest Reminder Color Augmentation

· Blue Light Filter: In this function, you can adjust the blue light filter from 0 to Max.

• 0: No change. Max: The higher the level, the less blue light is scattered. When
  blue light filter is activated, the default settings of Standard Mode will be automatically imported. Besides maximum level, the brightness is user- configurable. Maximum is the optimized setting. It is compliance with TUV low blue light certification. The brightness function is not user configurable.
  *When color augmentation is in default value (50).
  Please refer to the following to alleviate eye strains:
  · Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
  · To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
  · Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
  · High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome) when the user adjusts blue light filter bar to maximum level.

ASUS LCD Monitor VP32U Series

3-3

· Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, if you set a 30-minute working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds when time is up. Press any key to make this reminder OSD disappear.
When this function is enabled, the following functions are not available: Splendid Demo Mode, GamePlus, QuickFit.

· Color Augmentation: The adjusting range of color enhancement is from 0 to 100.
· This function is not available when sRGB Mode is selected in the Splendid menu.
· This function is not available when Reddish or Yellowish is selected in the Skin Tone menu.

3. Color Select the image color you like from this function.

Color

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

Brightness Contrast Saturation Color Temp. Skin Tone

· Brightness: Adjust the brightness level. The adjusting range is from 0 to 100.
· Contrast: Adjust the contrast level. The adjusting range is from 0 to 100.
· Saturation: Adjust the saturation level. The adjusting range is from 0 to 100.
· Color Temp.: Select the desired color temperature. Available options: Cool, Normal, Warm, and User Mode.
· In the User Mode, colors of R (Red), G (Green), and B (Blue) are userconfigurable the adjusting range is from 0 ~ 100.

· Skin Tone: Select the desired skin color. Available options: Reddish, Natural, and Yellowish.

3-4

Chapter 3: General Instruction

4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR,Adaptive-Sync(for HDMI only), HDR from this main function.

Image
Sharpness Trace Free Aspect Control VividPixel ASCR Adaptive-Sync HDR

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

· Sharpness: Adjust the picture sharpness. The adjusting range is from 0 to 100.
· Trace Free: Speed up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100.
· Aspect Control: Adjust the aspect ratio to “Full”, “4:3”, or “OverScan”.
· 4:3 is only available when the input source is in 4:3 format. · OverScan is only available for HDMI input.
· VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0~100.
· ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
· Adaptive-Sync : Select ON or OFF to enable or disable the dynamic refresh rate 60Hz .
· HDR:High Dynamic Range. Contains two HDR modes (ASUS Cinema HDR & ASUS Gaming HDR). HDR function will be locked when connected to AMD FreeSync2 HDR video.

ASUS LCD Monitor VP32U Series

3-5

5. Input Select Select the input source.
Input Select
HDMI Dispiay Port

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

6. System Setup Adjust the system configuration.
System Setup
Splendid Demo Mode Volume QuickFit GamePlus ECO Mode OSD Setup Language Key Lock More

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

(Page 1/2)

ASUS LCD Monitor VP32U Series

3-7

System Setup
Back Information Power Indicator Power Key Lock All Reset

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz

(Page 2/2)
· Splendid Demo Mode: Activate the demo mode for the Splendid function.
· Volume:The adjusting range is from 0 to 100. · QuickFit: See 3.1.2.2 QuickFit function. · GamePlus: Activate Crosshair, Timer or FPS Counter or Display
Alignment function.. · ECO Mode: Activate the ecology mode for power saving. · OSD Setup: Adjust the OSD Timeout, DDC/CI, and
Transparency of the OSD screen. · Language: Select the OSD language. · Key Lock: Pressing the second button on the right for more than
five seconds to activate the key lock function. · More: Return the next page of System Setting. · Back: Return the previous page of System Setting. · Information: Display the monitor information. · Power Indicator: Turn the power LED indicator on/off. · Power Key Lock: Disable/Enable the power key. · All Reset: Select YES to revert all settings to the factory default
mode.

3-8

Chapter 3: General Instruction

7. Shortcut Assign the specific function to the two shortcut keys.

Shortcut
Shortcut 1 Shortcut 2

ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz
Blue Light Filter Splendid Brightness Contrast Input Select Color Temp. Volume More

Shortcut
Shortcut 1 Shortcut 2

(Shortcut 1)
ASUS VP32UQ HDR OFF Standard Mode HDMI 3840X2160 @ 60Hz
Blue Light Filter Splendid Brightness Contrast Input Select Color Temp. Volume More

(Shortcut 2)
· Shortcut 1: Assign a function to the Shortcut Key1. Available options: Blue Light Filter, Splendid, Brightness, Contrast, Input Select, Color Temp., Volume,GamePlus,QuickFit, Rest Reminder ,Color Augmentation ,and . The default setting is Input Select,.
· Shortcut 2: Assign a function to the Shortcut Key2. Available options: Blue Light Filter, Splendid, Brightness, Contrast, Input Select, Color Temp., Volume,GamePlus,QuickFit, Rest Reminder ,Color Augmentation, The default setting is Brightness.

3-10

Chapter 3: General Instruction

3.1.2.1 GamePlus Function
The GamePlus function provides a toolkit and creates a better gaming environment for users when playing different types of games. The crosshair overlay with 6 different crosshair options letting you choose the one that best suits the game you’re playing. There’s also an onscreen timer you can position on the left of the display so you can keep track of the elapsed gaming time; while the FPS (frames per second) counter lets you know how smooth the game is running. Display Alignment displays alignment lines on 4 sides of the screen, serving as an easy and handy tool for you to line up multiple monitors perfectly.
To activate GamePlus:
1. Press the Menu button to activate the OSD menu.
2. Press the or button to select Shortcut. Then press the button to enter the Shortcut menu.
3. Press the or button to select Shortcut 1 or Shortcut 2.
4. Press the button to enter the Shortcut 1 or Shortcut 2 submenu.
5. Press the or button to select GamePlus. Then press the button to con irm the GamePlus submenu.
6. Press the or button to select Crosshair, Timer, FPS Counter or Display Alignment. Then press the button to confirm the selection.
7. Press the button repeatedly to exit the OSD menu.
8. Press the assigned Shortcut Key1 or Shortcut Key2 to activate the GamePlus main menu.

GamePlus Main Menu
GamePlus
Crosshair (Practice Mode)
Timer FPS
FPS Counter
Display Alignment

GamePlus — Crosshair
GamePlus

GamePlus — Timer
GamePlus

NEXT

BACK/EXIT

NEXT

BACK/EXIT

NEXT

BACK/EXIT

3-12

Chapter 3: General Instruction

3.1.2.2 QuickFit Function
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3) Photo size.
1. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.

Alignment Grid 1 Alignment Grid 2

2. Paper size: Provides users to view their documents in real size on the screen.

B5

Letter

B5

Letter

EXIT
3. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen.

8×10 5×7

4×6 3×5 2×2

3.2 Specifications
Model
Panel Size Max. Resolution Brightness (Typ.) Intrinsic Contrast Ratio (Typ.) Viewing Angle (CR>10) Display Colors Response Time VGA input HDMI input DisplayPort Audio Line-out

VP32U 31.5”W(80cm) 3840X2160@60Hz
350cd/m2
1000:1
178°(H) /178°(V) 1.07B
4ms (G To G ) N/A Yes Yes Yes

Power ON Consumption

<32w (Mesauring a screen brightness of 200 nits Without audio
/ USB / Card reader connection)

Chassis Colors
Power saving mode
Power off mode
Tilt
Wall Mount Phys. Dimension with stand (WxHxD) Phys. Dimension without stand (WxHxD) (For Wall Mount) Box Dimension (WxHxD)
Net Weight (Esti.)
Gross Weight (Esti.)
Voltage Rating
Temperature(operation)

Black < 0.5W < 0.3W -5° ~ +8° Yes (100mm x 100mm)
715mmx 424mmx 50mm
715mm x 492mm x 202mm
799mm x 526mm x140mm 7.9kg 9.8kg
AC: 100-240V~50/60Hz,1.2A 0~40

ASUS LCD Monitor VP32U Series

3-13

3.3 Troubleshooting (FAQ)

Problem

Possible Solution

Power LED is not ON

· Press the button to check if the monitor is turned on.
· Check if the power cord are properly connected to the monitor and the power outlet.
· Check the Power Indicator function in the OSD menu. Select “ON” to turn on the power LED.

The power LED lights amber and · Check if the monitor and the computer are turned

there is no screen image

on.

· Make sure the signal cable is properly connected the

monitor and the computer.

· Inspect the signal cable and make sure none of the pins are bent.

· Connect the computer with another available monitor to check if the computer is properly working.

Screen image is too light or dark · Adjust the Contrast and Brightness settings via OSD.

Screen image bounces or a wave · Make sure the signal cable is properly connected to

pattern is present in the image

the monitor and the computer.

· Move electrical devices that may cause electrical interference.

Screen image has color defects (white does not look white)

· Inspect the signal cable and make sure that none of the pins are bent.
· Perform Reset via OSD.
· Select the appropriate color temperature (Color Temp.) via OSD.

No sound or sound is low(NA)

· Adjust the volume settings of your monitor or computer.
· Make sure the computer sound card driver is properly installed and activated.

3.4 Supported Timing List

3-14

Chapter 3: General Instruction

Support Timing table 1 640×480/60 2 800×600/56 3 800×600/60 4 1024×768/60 5 1280×960@60Hz 6 1280×1024@60Hz 7 1280×720@60Hz 8 1280×800@60Hz 9 1440×900@60Hz 10 1680×1050@60Hz 11 1920×1080@60Hz 12 3840×2160 @ 60Hz 13 2560×1440 @ 60Hz 14 640 x 480 P 59.94/60Hz 4:3 15 720 x 480 P 59.94/60Hz 16:9 16 1280 x 720 P 59.94/60Hz 16:9 17 720 x 576 P 50Hz 16:9 18 1280 x 720 P 50Hz 16:9 19 1920 x 1080 I 59.94/60Hz 16:9 20 1920 x 1080 I 50Hz 16:9 21 1920 x 1080 P 50Hz 16:9 22 1920 x 1080 P 59.94/60Hz 16:9 23 720(1440) x 480 I 59.94/60Hz 16:9 24 720(1440) x 480 I 59.94/60Hz 4:3 25 720 x 480 P 59.94/60Hz 4:3 26 3840 x 2160 P @ 23.98/24Hz 27 3840 x 2160 P @ 25Hz 28 3840 x 2160 P @ 29.97/30Hz 29 3840 x 2160 P @ 50Hz 30 3840 x 2160 P @ 59.94/60Hz 31 1920 x 1080 P 24Hz 16:9 32 1440 x 480 P 59.94/60Hz 16:9 33 1440 x 576 P 50Hz 16:9 34 720(1440) x 576 I 50Hz 16:9 35 1920 x 1080 P @ 23.98/24Hz 36 1440 x 480 P 59.94/60Hz 4:3 37 1440 x 576 P 50Hz 4:3 38 720(1440) x 576 I 50Hz 4:3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>