Polk SR2 Wireless Surround Sound Speakers Instruction Guide
- October 27, 2023
- polk
Table of Contents
Polk SR2 Wireless Surround Sound Speakers
Specifications
- DIMENSIONS: 83 x 4.05 x 4.47 inches
- WEIGHT: 83 pounds
- DRIVER SIZE: 3 inches
- MODEL : SR2
- BRAND: Polk
Introduction
Each speaker has a strong, 3″ custom-tuned driver that produces large sound and amplifies your music and movies. The integrated amps significantly alter the feel of your area.
Without the inconvenience of speaker wires snaking across your space, the rear surround speakers wirelessly connect to your sound bar in a matter of minutes. To turn your React Sound bar into a 5.1 channel configuration, add the Polk React Sub.
Using the provided template, mount the speakers to the wall or place them on a shelf. The dedicated L-R speakers ensure precise positioning and a well- balanced surround sound experience by clearly labeling each speaker as left or right.
What’s in the Box
- EU/UK adaptors are included with some models.
Position your surround speakers
- Place the surround speakers on the left and right sides, equidistant and slightly behind the main listening position.
- Make sure you place the speaker marked “LEFT” on the left and the speaker marked “RIGHT” on the right.
- Aim the surround speakers toward the main listening position.
- Plug a power supply into each speaker and then into a power outlet.
Connect your surround speakers
Enter pairing mode on the sound bar.
-
Press and hold the CONNECT button on the back of the sound bar for about 4 seconds.
Connect the surround speakers -
Press and hold the CONNECT button on the back of the surround speaker for about 4 seconds.
-
Release the button when the light on the back of the surround speaker is solid green.
-
Repeat steps 2 and 3 for the other surround speaker.
-
Press and release the CONNECT button on the back of the sound bar to complete pairing.
Troubleshooting
I don’t hear sound from my surround speakers.
If the light on the bottom of the surround speaker is:
- Off, verify that the power supply is connected to the speaker and to a working power outlet.
- Amber, make sure your sound bar is turned on, and connect the speaker to the sound bar using the instructions on the previous page.
- Green, turn up the surround volume using the remote control.
Updating your surround speakers
The SR2 surround speakers are automatically updated whenever your sound bar is connected to the Internet and receives an update. Refer to your sound bar’s Quick Start Guide and make sure your sound bar is properly connected to your home network.
For more troubleshooting and information, please visit polkaudio.com/support.
FREQUENTLY ASKED QUESTIONS
Will the Echo Subwoofer be compatible with this?****
The answer is no, an echo subwoofer won’t work.
Can more than one pair of speakers be connected to a single Polk sound bar?****
That isn’t an advantage.
How long is the HDMI and power cables that are included?****
Unknown power source and power wire length. Optical cable: 6′, HDMI cable: 6.5′.
Is it compatible with the Magnifi tiny axe?****
The Polk Audio SR2 wireless surround speakers can be added to the new Polk Audio MagniFi Mini AX. The first MagniFi Mini soundbar didn’t have one.
What is the soundbars width?****
Size (inches) of the sound bar is 2-1/4 high by 34 wide by 4-3/4 deep.
Can I put something there that is 7″ above it on a lower shelf?****
The recommended height clearance is 7″. As with any speaker, ear level or slightly higher is preferred for positioning. It’s also strongly advised to mount or place the speaker near the TV’s base.
How are they powered?****
The speakers’ power connection is connected to a power transformer via a wall outlet.
Can I add wireless speakers to my Polk soundbar?****
They don’t require speaker cords to function because they use Bluetooth, but you do need to connect them into a 120 volt outlet. The electrical cables span nine feet.
Is Polk good surround sound?****
It offers the ideal balance of functionality, aesthetics, use, and price. The speakers look fantastic and sound as good as anything we’ve tried in their price range.
Can you add rear speakers to Polk soundbar?****
Two wireless SR1 surround speakers and one wireless subwoofer are included with the MagniFi Max SR soundbar. You cannot add any more wireless speakers.
Can you add wireless speakers to a surround sound system?****
To provide your surround speakers a high-quality wireless signal, you can easily install a wireless speaker kit. Both transmitting and receiving equipment is included in these kits. The transmitting unit “transmits” inputs it receives from the receiving unit or from other sources.
How do I sync my surround speakers to my Polk soundbar?****
Each surround speaker’s SYNC button should be pressed and held for three seconds. When the sound bar and the surround speaker are connected, the green LED on the rear of the speaker will start flashing more rapidly before going solid green.
How do wireless surround sound speakers get power?****
The majority of wireless speakers connect to standard power outlets or power strips using AC adapters. To become “truly wireless,” some systems employ rechargeable batteries, although this feature necessitates repositioning and charging as routine tasks in order to use this type of surround sound system.
Can I connect speakers to my TV directly?****
No, only active speakers with an integrated amplifier can be connected directly to a television.
Can you use a soundbar and wireless speakers at the same time?****
Yes. Although there are numerous considerations to take into account, as was already discussed, you can pair your soundbar with additional speakers. You might find the process excessively complicated, depending on your soundbar model, output device connection, and external speakers.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>