ozito PXBP-400 18V Lithium ION 4.0Ah Battery Instruction Manual
- June 6, 2024
- ozito
Table of Contents
18V Lithium ION
4.0Ah BATTERY
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Battery Capacity: 4.0Ah Li-ion
Power Consumption: 72Wh
Weight: 0.65kg
ozito.com.au
- Battery
- Battery Release Button
- Charge Indicator Button
PXBP-400
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
**Power tools that are no longer usable should not be disposed of with
household waste but in an environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority for recycling
advice.
**Recycling packaging reduces the need for
landfills and raw materials. The reuse of recycled material decreases
pollution in the environment. Please recycle packaging where facilities exist.
Check with your local council authority for recycling advice.
BATTERY & CHARGER SAFETY WARNINGS
Before using the charger or battery read all instructions and cautionary
markings on the charger, battery pack, and the product using the battery pack.
Do not lose these safety instructions.
Battery Warnings
-
The battery pack is not fully charged out of the carton. First, read the safety instructions and then follow the charging notes and procedures.
-
For optimum battery performance avoid low discharge cycles. Charge the battery pack frequently.
-
Use and store the battery pack in dry conditions with low humidity between 0-50°C, ideally at 15°C. Avoid exposing the battery pack and charger to direct sunlight.
-
Do not keep the battery pack in places where temperatures are liable to reach over 50°C, such as in a car, metal shed, or similar that is in direct sunlight.
-
Do not ignite the battery pack or expose it to fire. There is a risk of explosion!
-
Do not exhaustively discharge batteries. An exhaustive discharge will damage the battery cells. The most common cause of the exhaustive discharge is long-term storage and continued use of low-charge batteries. Always store the battery with some charge. Charge the batteries every 2-3 months to restore the charge. Stop working as soon as the performance of the battery falls noticeably or the electronic protection system triggers.
-
Protect batteries and the tool from overloads. Overloads will quickly result in overheating and cell damage inside the battery housing without this overheating being apparent externally.
-
Avoid damage and shocks. Do not use batteries that have been dropped from a height of more than one meter or strong external impact, even if the housing of the battery pack appears to be undamaged. The battery cells inside the battery may have suffered serious damage.
-
If the battery pack suffers overloading and overheating, the integrated protective cut-off will switch off the equipment. Do not press the ON/OFF switch on the tool if the protective cut-off has actuated. This may damage the battery pack. Allow the battery to cool to room temperature before use.
-
Use only original battery packs. The use of other batteries may result in injuries, explosions,s, and a fire risk.
-
Protect your rechargeable battery against moisture, rain, and high humidity. Moisture, rain, and high humidity can cause dangerous cell damage. Never charge or use batteries that have been exposed to moisture, rain, or high humidity.
-
Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack is damaged, do not use the battery.
-
When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
-
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If accidental contact occurs, flush with water and seek medical help immediately. Liquid ejected from the battery may cause irritation or burns.
-
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
-
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause an explosion.
-
Never service damaged battery packs. The service of battery packs should only be performed by the manufacturer.
-
Do not disassemble Battery. This may result in a risk of electric shock, electrocution, or fire.
Charger Warnings -
Please check the date marked on the rating plate of the battery charger. Ensure to only connect the battery charger to a power supply with the voltage marked on the rating plate.
-
Protect the battery charger and its cable from damage and sharp edges. Have damaged cables been repaired by an authorized service agent before use?
-
Keep the battery charger, batteries, and cordless tool out of children’s reach.
-
Do not use damaged battery chargers.
-
Do not use the supplied battery charger to charge other cordless tools. Only charge Ozito Power X Change rechargeable batteries with an Ozito Power X Change Charger.
-
The battery pack may become warm during use. Allow the battery pack to cool to room temperature before commencing with the charging.
-
Do not overcharge batteries. Do not exceed the maximum charging times. These charging times only apply to discharged batteries. Frequent insertion of a charged or partly charged battery pack will result in over-charging and cell damage. Do not leave fully charged batteries in the charger.
-
Charge the battery pack in dry conditions with low humidity between 10-40°C. Avoid exposing the battery pack and charger to direct sunlight.
-
Do not use batteries that have suffered deformation during the charging process or show any other signs of abnormalities including, excessive curvature of the housing, gassing, hissing or cracking.
-
Never fully discharge the battery pack. A complete discharge of the battery pack will lead to premature aging of the battery cells.
-
Never charge the batteries unsupervised.
-
Do not cover or place any object on top of the charger, place the charger away from heat sources.
-
To reduce the risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
-
Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
-
An extension cord should not be used unless necessary. Use of an improper extension cord could result in the risk of fire, electric shock, or electrocution.
-
Do not disassemble the charger. This may result in a risk of electric shock, electrocution or fire.
-
To reduce the risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack will not reduce this risk.
-
Do not use the cordless tool or the battery charger near vapors and inflammable liquids.
ELECTRICAL SAFETY
WARNING! When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce the risk of fire,
electric shock, personal injury, and material damage.
Read the whole manual carefully and make sure you know how to switch the tool
off in an emergency, before operating the tool. Save these instructions and
other documents supplied with this tool for future reference.
Note: The supply of 230V and 240V on Ozito tools are interchangeable for
Australia and New Zealand.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions
when operating this tool. The insulation system is for added protection
against injury resulting from a possible electrical insulation failure within
the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this
tool. Before use, inspect the extension lead for signs of damage, wear, and
aging. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use
of an extension lead not suitable for the power input of the tool or which is
damaged or defective may result in a risk of fire and electric shock.
To reduce the risk of electric shock, we recommend the use of a residual
current device (rated 30mA or less).
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
OPERATION
Only use the battery pack with Ozito Power X Change 18V cordless products.
CHARGING YOUR LITHIUM-ION BATTERY
This battery has been shipped in a low charge condition and requires charging
prior to use. Allow several cycles of charging and discharging (through use
with a compatible tool) for the battery to reach its optimum
performance/runtime.
This battery is compatible with chargers from the 18V Ozito Power X Change
range available through your local Bunnings Warehouse. Product availability
may differ.
- Insert the power plug of the charger into the main socket outlet. The green LED will begin to flash when properly connected to the power supply.
- Insert the battery pack into the battery charger.
- Remove the battery from the charger once fully charged. Disconnect the charger from the power supply.
Note: The battery pack can become a little warm during the charging. This
is normal.
If the battery pack fails to charge, check:
if there is voltage at the socket-outlet that the battery and charger are
properly connected.
If the battery pack still fails to charge, please contact our customer service
center.
BATTERY CHARGE INDICATOR
The purchased battery is equipped with a battery charge indicator to show the
state of the battery charge.
Press the charge indicator button and look to see which LED lights.
The battery requires immediate charging
The low state of charge requires charging soon.
Mid-state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of
charge.
BATTERY PROTECTION SYSTEM
The tool is equipped with a battery protection system, which helps to ensure
the longevity of the battery.
The output power automatically cuts off during operation when the tool and/or
battery are placed under the following situations:
- When the tool is overloaded: If this occurs, release the trigger switch and remove causes of overload, then pull the switch trigger again to restart.
- When the remaining battery capacity becomes low: Recharge the battery pack.
Note: The battery protection system does not in any way damage the tool.
Note: The indicated capacity may be lower than the actual level during
use or immediately after using the tool.
WARRANTY
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER
ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE.
The benefits provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are
entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Generally, you will be responsible for all costs associated with a claim under
this warranty, however, where you have suffered any additional direct loss as
a result of a defective product you may be able to claim such expenses by
contacting our customer service helpline above.
36 MONTH REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is
defective it will be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts.
WARNING
The following actions will result in the warranty being void.
- If the tool has been operated on a supply voltage other than that specified on the tool.
- If the tool shows signs of damage or defects caused by or resulting from abuse, accidents, or alterations.
- Failure to perform maintenance as set out within the instruction manual.
- If the tool is disassembled or tampered with in any way.
ONLINE MANUAL
Scan this QR Code with your mobile device to take you to the online manual.
http://www.ozito.com.au/PXBP-400
OZITO Australia/New Zealand (Head Office) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
PXBP-400
Documents / Resources
|
ozito PXBP-400 18V Lithium ION 4.0Ah
Battery
[pdf] Instruction Manual
PXBP-400, 18V Lithium ION 4.0Ah Battery, PXBP-400 18V Lithium ION 4.0Ah
Battery, 4.0Ah Battery
---|---
|
ozito PXBP-400 18V Lithium Ion 4.0Ah
Battery
[pdf] Instruction Manual
PXBP-400, 18V Lithium Ion 4.0Ah Battery, PXBP-400 18V Lithium Ion 4.0Ah
Battery
|
ozito PXBP-400 18V Lithium Ion 4.0Ah
Battery
[pdf] Instruction Manual
PXBP-4001, 8V Lithium Ion 4.0Ah Battery, PXBP-400 18V Lithium Ion 4.0Ah
Battery, 4.0Ah Battery, Battery
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>