V-TAC LED Bulb with Emergency Function & Solar Charging VT-2417 Installation Guide
- June 6, 2024
- V TAC
Table of Contents
Weee Number: 80133970
INSTALLATION INSTRUCTION
LED Bulb with Emergency Function & Solar Charging
TECHNICAL DATA:
| Model | VT-2417 |
|---|---|
| Input | AC 220-240V, 50 Hz |
| Power | AC MODE: 7W |
EMERGENCY MODE: 1.5W (6400K)
Lumens| AC MODE – 500 LM
EMERGENCY MODE: 130 LM
Solar Panel| DC 6V, 2W
Charging time| 811
Working time| 6H
Battery Capacity| 3.7V, 2200mAh
CRI/Ra| >80
Beam Angle:| 120°
Base:| E27
Color:| AC Mode: 3000K – 6400K (Changeable)
Emergency Mode: White (6400K)
INTRODUCTION AND WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Do not use with dimmers
- Do not replace the battery.
- Do not expose to water.
- Avoid using into totally enclosed luminaries.
- Keep away from fire or high temperature.
This marking indicates that this product should not be disposed of with other household wastes.
ACCESSORIES INCLUDED
- Solar Panels (Wire Length 3M)
- E27 Holder with hook and on/off switch.
- Micro USB Cable
PRODUCT FEATURES
ADDITIONAL CCT FUNCTION (ONLY FOR AC MODE)
- When you switch on/off the bulb first time, the color will be White (6400K).
- When you switch on/off the bulb second time will be Warm White (3000K).
- When you switch on/off the bulb third time, will be Day White (4000K).
BULB USAGE METHODS
CHARGING METHODS
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTIONS (AC MODE)
- Ensure that the power is switched off.
- Fix the bulb into the E27 bulb holder.
- Switch the bulb on/off as normal.
Note: During power failure (emergency mode), the CCT function wont work and the LED color will be only white.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [email protected] FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B