Munters Green WTS Water Temperature Sensor Instruction Manual
- June 6, 2024
- Munters
Table of Contents
Installation
Manual Green Water temperature sensor
Green Water Temperature Sensor
Installation Manual
Rev 1.1, 09/2021
This manual for use and maintenance is an integral part of the apparatus
together with the attached technical documentation. This document is destined
for the user of the apparatus: it may not be reproduced in whole or in part,
committed to computer memory as a file, or delivered to third parties without
the prior authorization of the assembler of the system. Munters reserves the
right to effect modifications to the apparatus in accordance with technical
and legal
developments.
Introduction
Disclaimer
Munters reserves the right to make alterations to specifications, quantities,
dimensions, etc. for production or other reasons, subsequent to publication.
The information contained herein has been prepared by qualified experts within
Munters. While we believe the information is accurate and complete, we make no
warranty or representation for any particular purposes. The information is
offered in good faith and with the understanding that any use of the units or
accessories in breach of the directions and warnings in this document is at
the sole discretion and risk of the user.
Introduction
Congratulations on your excellent choice of purchasing a Green Water
Temperature Sensor! In order to realize the full benefit from this product, it
is important that it is installed, commissioned, and operated correctly.
Before installation or using the sensor, this manual should be studied
carefully. It is also recommended that it be kept safely for future reference.
The manual is intended as a reference for installation, commissioning, and
day-to-day operation of the Munters equipment.
Notes
Date of release: April 2020
Munters cannot guarantee to inform users about the changes or to distribute
new manuals to them. All rights reserved. No part of this manual may be
reproduced in any manner whatsoever without the expressed written permission
of Munters. The contents of this manual are subject to change without notice.
Wiring
Water Temperature Sensor: Place the jumper on TEMP on the corresponding
jumper section.
Controller
-
Connect the sensor to an input port and a COM port.
NOTE The connection polarity in this sensor is not relevant. -
On the corresponding pins, place the jumper on TEMP.
-
The above drawing is an example installation. Users can connect the Water Temperature Sensor wires to any IN and COM port on the RAIC11 card.
Water Temperature Sensor Specifications
| Type: | 30 Kohm Thermistor |
|---|---|
| Maximum Cable Length: | 500 meter (1640 feet) |
| Curve Number: | 1 |
| Measuring Temperature Range: | 0° to 150°C |
| Typical Accuracy: | 0-50°C |
0.3°C
- 50-100°C
| 0.5°C
- 100-130°C
| 0.7°C
- 130-150°C
| 1°C
Warranty
Warranty and technical assistance
Munters products are designed and built to provide reliable and satisfactory
performance but cannot be guaranteed free of faults; although they are
reliable products they can develop unforeseeable defects and the user must
take this into account and arrange adequate emergency or alarm systems if
failure to operate could cause damage to the articles for which the Munters
plant was required: if this is not done, the user is fully responsible for the
damage which they could suffer.
Munters extends this limited warranty to the first purchaser and guarantees
its products to be free from defects originating in manufacture or materials
for one year from the date of delivery, provided that suitable transport,
storage, installation, and maintenance terms are complied with. The warranty
does not apply if the products have been repaired without express
authorization from Munters, or repaired in such a way that, in Munters’
judgment, their performance and reliability have been impaired, or incorrectly
installed, or subjected to improper use. The User accepts total responsibility
for incorrect use of the products.
The warranty on products from outside suppliers fitted to Green Water
Temperature Sensor, (for example power supplies, cables, etc.) is limited to
the conditions stated by the supplier: all claims must be made in writing
within eight days of the discovery of the defect and within 12 months of the
delivery of the defective product. Munters has thirty days from the date of
receipt in which to take action and has the right to examine the product at
the customer’s premises or at its own plant (carriage cost to be borne by the
customer).
Munters at its sole discretion has the option of replacing or repairing, free
of charge, products which it considers defective, and will arrange for their
despatch back to the customer carriage paid. In the case of faulty parts of
small commercial value which are widely available (such as bolts, etc.) for
urgent despatch, where the cost of carriage would exceed the value of the
parts, Munters may authorize the customer exclusively to purchase the
replacement parts locally; Munters will reimburse the value of the product at
its cost price.
Munters will not be liable for costs incurred in demounting the defective
part, or the time required to travel to the site, and the associated travel
costs. No agent, employee, or dealer is authorized to give any further
guarantees or to accept any other liability on Munters’ behalf in connection
with other Munters products, except in writing with the signature of one of
the Company’s Managers.
WARNING: In the interests of improving the quality of its products and services, Munters reserves the right at any time and without prior notice to alter the specifications in this manual.
The liability of the manufacturer Munters ceases in the event of:
- dismantling the safety devices;
- use of unauthorised materials;
- inadequate maintenance;
- use of non-original spare parts and accessories.
Barring specific contractual terms, the following are directly at the user’s expense:
- preparing installation sites;
- providing an electricity supply (including the protective equipotential bonding (PE) conductor, in accordance with CEI EN 60204-1, paragraph 8.2), for correctly connecting the equipment to the mains electricity supply;
- providing ancillary services appropriate to the requirements of the plant on the basis of the information supplied with regard to installation;
- tools and consumables required for fitting and installation;
- lubricants necessary for commissioning and maintenance.
It is mandatory to purchase and use only original spare parts or those
recommended by the manufacturer. Dismantling and assembly must be performed by
qualified technicians and according to the manufacturer’s instructions.
The use of non-original spare parts or incorrect assembly exonerates the
manufacturer from all liability. Requests for technical assistance and spare
parts can be made directly to the nearest Munters office. A full list of
contact details can be found on the back page of this manual.
Munters Israel
18 HaSivim Street
Petach-Tikva 49517, Israel
Telephone: +972-3-920-6200
Fax: +972-3-924-9834
Australia Munters Pty Limited, Phone +61 2 8843 1594, Brazil Munters Brasil Industria e Comercio Ltda, Phone +55 41 3317 5050, Canada Munters Corporation Lansing, Phone +1 517 676 7070, China Munters Air Treatment Equipment (Beijing) Co. Ltd, Phone +86 10 80 481 121, Denmark Munters A/S, Phone +45 9862 3311, India Munters India, Phone +91 20 3052 2520, Indonesia Munters, Phone +62 818 739 235, Israel Munters Israel Phone +972-3-920-6200, Italy unters Italy S.p.A., Chiusavecchia, Phone +39 0183 52 11, Japan Munters K.K., Phone +81 3 5970 0021, Korea Munters Korea Co. Ltd., Phone +82 2 761 8701, Mexico Munters Mexico, Phone +52 818 262 54 00, Singapore Munters Pte Ltd., Phone +65 744 6828, South Africa and Sub-Sahara Countries Munters (Pty) Ltd., Phone +27 11 997 2000, Spain Munters Spain S.A., Phone +34 91 640 09 02, Sweden Munters AB, Phone +46 8 626 63 00, Thailand Munters Co. Ltd., Phone +66 2 642 2670, Turkey Munters Form Endüstri Sistemleri A.Ş, Phone +90 322 231 1338, USA Munters Corporation Lansing, Phone +1 517 676 7070, Vietnam Munters Vietnam, Phone +84 8 3825 6838, Export & Other countries Munters Italy S.p.A., Chiusavecchia Phone +39 0183 52 11
© Munters AB, 2020
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>