RYOBI 7-1/4 in. Circular Saw with Laser CSB134L User Guide
- June 6, 2024
- RYOBI
Table of Contents
RYOBI 7-1/4 in. Circular Saw with Laser CSB134L User Guide
REPAIR SHEET
BRAND
RYOBI
| DESCRIPTION
7-1/4 in. Circular Saw with Laser
MODEL NO.
CSB134L
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1288, Anderson, SC 29622 n 1-800-525-2579 n www.ryobitools.com 2-23-21 (Rev:04)
The model number and manufacturing location will be found on a label attached to the product. Always mention this information in all communications regarding this product and when ordering parts.
Ryob CSB134L
KEY NO.| PART NO.| DESCRIPTION| QTY.| | KEY
NO.| PART NO.| DESCRIPTION| QTY.|
---|---|---|---|---|---|---|---|---|---
1| 660208052| Screw (M4 x 16 mm, Pan Hd.)| 7| 34| 730372029| Power Cord| 1|
2| 524937001| End Cover| 1| 35| 305407001| Base Assembly (Inc. Key Nos.
45-50)| 1|
3| 562998001| Rubber Bumper| 2| 36| 660206042| Screw (M3.5 x 16 mm, Pan Hd.)|
3|
4| 290075001| Brush Assembly| 2|
37| 351101001| Laser Cover| 1|
5| 660259008| Screw (M4.5 x 35 mm)| 3|
38| 693240001| Compression Spring| 1|
6| 524935001| Motor Housing| 1|
39| 291129001| Laser Assembly| 1|
7| 681304001| Ball Bearing (608-2RS)| 1|
40| 513075002| Hex Nut (M3)| 1|
8| 230452001| Motor Assembly (Inc. Key No. 7)| 1|
41| 512963002| Nylon Screw (M3 x 6 mm, Special)| 1|
9| 660101002| Screw (4.2 x 2.54 x 50, Type B Pan Hd.)| 2|
42| 612031001| Depth Lock Nut (1/4-20)| 1|
10| 941120012| Warning Label| 1|
43| 634295001| E-Ring| 1|
11| 525084001| Volute| 1|
44| 634293001| Depth Lock Lever| 1|
12| 634292001| Spindle Lock| 1|
45| 660104010| Carriage Bolt (1/4-20 x 5/8 in.)| 1|
13| 693411002| Compression Spring| 1|
46| 660106007| Hex Nut (8-32)| 1|
14| 670974003| Lock Nut (M5)| 1|
47| 660112006| Screw (8-32 x 11/32 in., Pan Hd.)| 1|
15| 202001006| Upper Blade Guard Assembly (Inc. Key No. 10, 18, 53-54 & 56)|
1|
16| 561984001| Bumper| 1| 48| 301124010| Bevel Lock Knob| 1|
17| 660193005| Shoulder Screw (M5 x 20 mm)| 1| 49| 680771002| Washer (OD5/8 x
ID7/16 x 1/16t)| 1|
18| 680413005| Bushing| 1| 50| 634389001| Blade Wrench| 1|
19| 305403001| Output Shaft and Gear Assembly| 1| 51| 941121020| Data Label|
1|
20| 680980003| Roll Pin| 1| 52| 941120008| Warning Label| 1|
21| 305401001| Lower Blade Guard Support Assembly (Inc. Key No. 19)| 1| 53|
941006007| Laser Label (ENG/FR)| 1|
22| 661349001| Screw (M4 x 16 mm, Pan Hd.)| 4|
54| 941006008| Laser Label (SP)| 1|
23| 680672006| Torsion Spring| 1|
55| 940304501| Logo Label| 1|
24| 524934002| Lower Blade Guard| 1|
56| 681717001| Ball Bearing (6000-2RS)| 1|
25| 693438001| Retaining Ring| 1|
57| 693616001| Cariage Bolt (1/4-20 x 5/8 in., Special)| 1|
26| 611791001| Inner Flange Bushing| 1|
58| 680776001| Spring Washer| 1|
27| 680775008| Outer Blade Washer| 1|
59| 681323001| Blade (7-1/4 in.)| 1|
28| 660988001| Blade Screw (5/16-18 x 9/16 in.)| 1|
60| 941001058| Laser Label| 1|
29| 202144001| Handle Assembly| 1|
| Not Shown:| | |
30| 280226001| Circuit Board w/Micro Switch Assembly| 1|
| 202218001| Edge Guide Kit (Optional)| |
31| 760476003| Switch| 1|
| 200673002| Dust Nozzle Kit (Optional)| |
32| 790021001| Closed End Wire Connector| 1|
| 988000819| Operator’s Manual| |
33| 551060002| Bend Relief| 1|
|
Ryob CSB134L
WIRING DIAGRAM